diff mbox series

[28/29] network: Silence any output during the QMI setup

Message ID	20221201172318.3166615-28-michael.tremer@ipfire.org
State	Accepted
Commit	b1ff8adbf0271c37139303441f30a485ea0c85b9
Headers	From: Michael Tremer <michael.tremer@ipfire.org> To: development@lists.ipfire.org Subject: [PATCH 28/29] network: Silence any output during the QMI setup Date: Thu, 1 Dec 2022 17:23:17 +0000 Message-Id: <20221201172318.3166615-28-michael.tremer@ipfire.org> In-Reply-To: <20221201172318.3166615-1-michael.tremer@ipfire.org> References: <20221201172318.3166615-1-michael.tremer@ipfire.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: list Cc: Michael Tremer <michael.tremer@ipfire.org> Errors-To: development-bounces@lists.ipfire.org Sender: "Development" <development-bounces@lists.ipfire.org>
Series	[01/29] libgudev: New package \| [01/29] libgudev: New package [02/29] libqmi: New package [03/29] dhcpcd: Log any unhandled client events [04/29] dhcpcd.exe: Allow using the DHCP setup scripts when RED is not configured as DHCP [05/29] network: Allow passing custom options to dhcpcd [06/29] network: Add support for QMI modems [07/29] network: Drop any traces of ISDN [08/29] pppsetup.cgi: Add support for QMI profiles [09/29] pppsetup.cgi: Add support for QMI profiles [10/29] pppsetup.cgi: Move authentication above MTU [11/29] network: Remove --debug switch for dhcpcd in QMI mode [12/29] dhcpcd: Only try to obtain an IP address for IPv4 [13/29] dhcpcd.exe: Flush any configured IP addresses on shutdown [14/29] dhcpcd.exe: Actually use the received MTU [15/29] dhcpcd.exe: Only set gateway when we have received one [16/29] dhcpcd.exe: Store the default gateway when in QMI mode [17/29] dhcpcd.exe: Use DNS servers from QMI [18/29] dhcpcd.exe: Do not overwrite the default gateway when empty [19/29] dhcpcd.exe: Only touch /var/ipfire/red/active once [20/29] dhcpcd.exe: Run everything no matter how RED is configured [21/29] dhcpcd.exe: Fix typo in configuring DNS server [22/29] network: dhcpcd fails to check link state for QMI interfaces [23/29] dhcpcd.exe: Reformat the reason dispatcher [24/29] dhcpcd.exe: Ignore some events [25/29] dhcpcd.exe: Add a safety net to make sure we always have a route [26/29] network: Force dhcpcd to ask for an IP address [27/29] network: Assign "static" MAC addresses to QMI interfaces [28/29] network: Silence any output during the QMI setup [29/29] make.sh: Build some dependencies for glib earlier

Commit Message

Michael Tremer 1 Dec 2022, 5:23 p.m. UTC

  Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
---
 src/initscripts/networking/functions.network | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff mbox series

Patch

diff --git a/src/initscripts/networking/functions.network b/src/initscripts/networking/functions.network
index e8f6c28d8..36541eb13 100644
--- a/src/initscripts/networking/functions.network
+++ b/src/initscripts/networking/functions.network
@@ -256,14 +256,14 @@  qmi_configure_apn() {
 
 	qmicli --device="${device}" --device-open-proxy \
 		--wds-start-network="${_args}" \
-		--client-no-release-cid
+		--client-no-release-cid &>/dev/null
 }
 
 qmi_reset() {
 	local device="${1}"
 
 	qmicli --device="${device}" --device-open-proxy \
-		--wds-reset
+		--wds-reset &>/dev/null
 }
 
 # Assigns a "static" MAC address