diff mbox series

[3/3] Add zone-new-bridge test

Message ID	20180630180142.10382-3-jonatan.schlag@ipfire.org
State	New
Headers	From: Jonatan Schlag <jonatan.schlag@ipfire.org> To: network@lists.ipfire.org Subject: [PATCH 3/3] Add zone-new-bridge test Date: Sat, 30 Jun 2018 20:01:42 +0200 Message-Id: <20180630180142.10382-3-jonatan.schlag@ipfire.org> In-Reply-To: <20180630180142.10382-1-jonatan.schlag@ipfire.org> References: <20180630180142.10382-1-jonatan.schlag@ipfire.org> Precedence: list Errors-To: network-bounces@lists.ipfire.org Sender: "network" <network-bounces@lists.ipfire.org>
Series	[1/3] This recipe just resets the network config to a clean state \| [1/3] This recipe just resets the network config to a clean state [2/3] Recipe to set network settings for each test [3/3] Add zone-new-bridge test

Commit Message

Jonatan Schlag July 1, 2018, 4:01 a.m. UTC

  This test if we can execute 'network zone new upl0 bridge'

Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
---
 Makefile.am                                 | 10 +++++++---
 test/nitsi/test/zone-new-bridge/recipe      |  9 +++++++++
 test/nitsi/test/zone-new-bridge/settings.in |  9 +++++++++
 3 files changed, 25 insertions(+), 3 deletions(-)
 create mode 100644 test/nitsi/test/zone-new-bridge/recipe
 create mode 100644 test/nitsi/test/zone-new-bridge/settings.in

Comments

Michael Tremer July 1, 2018, 5:16 a.m. UTC | #1

Hello,

is it required to run this test on multiple machines simultaneously?

One should do, shouldn't it?

-Michael

On Sat, 2018-06-30 at 20:01 +0200, Jonatan Schlag wrote:
> This test if we can execute 'network zone new upl0 bridge'
> 
> Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
> ---
>  Makefile.am                                 | 10 +++++++---
>  test/nitsi/test/zone-new-bridge/recipe      |  9 +++++++++
>  test/nitsi/test/zone-new-bridge/settings.in |  9 +++++++++
>  3 files changed, 25 insertions(+), 3 deletions(-)
>  create mode 100644 test/nitsi/test/zone-new-bridge/recipe
>  create mode 100644 test/nitsi/test/zone-new-bridge/settings.in
> 
> diff --git a/Makefile.am b/Makefile.am
> index e56d0fb..e717133 100644
> --- a/Makefile.am
> +++ b/Makefile.am
> @@ -596,17 +596,21 @@ CLEANFILES += \
>  
>  NITSI_TESTS = \
>  	test/nitsi/test/hello-world \
> -	test/nitsi/test/make-check
> +	test/nitsi/test/make-check \
> +	test/nitsi/test/zone-new-bridge
>  
>  EXTRA_DIST += \
>  	test/nitsi/test/hello-world/recipe \
>  	test/nitsi/test/hello-world/settings \
>  	test/nitsi/test/make-check/recipe.in \
> -	test/nitsi/test/make-check/settings.in
> +	test/nitsi/test/make-check/settings.in \
> +	test/nitsi/test/zone-new-bridge/recipe \
> +	test/nitsi/test/zone-new-bridge/settings.in
>  
>  CLEANFILES += \
>  	test/nitsi/test/make-check/recipe \
> -	test/nitsi/test/make-check/settings
> +	test/nitsi/test/make-check/settings \
> +	test/nitsi/test/zone-new-bridge/settings
>  
>  NITSI_ENVIRONMENT =
>  
> diff --git a/test/nitsi/test/zone-new-bridge/recipe b/test/nitsi/test/zone-
> new-bridge/recipe
> new file mode 100644
> index 0000000..6c054df
> --- /dev/null
> +++ b/test/nitsi/test/zone-new-bridge/recipe
> @@ -0,0 +1,9 @@
> +include: ../../include/make-install
> +include: ../../include/network-settings
> +include: ../../include/network-reset
> +all: network zone new upl0 bridge
> +# this returns zero if the device exists
> +all: ip link show upl0
> +all: ls /sys/class/net/upl0
> +# check that the config dir exists
> +all: ls /etc/network/zones/upl0
> diff --git a/test/nitsi/test/zone-new-bridge/settings.in
> b/test/nitsi/test/zone-new-bridge/settings.in
> new file mode 100644
> index 0000000..207cfa0
> --- /dev/null
> +++ b/test/nitsi/test/zone-new-bridge/settings.in
> @@ -0,0 +1,9 @@
> +[GENERAL]
> +name = zone-new-bridge
> +description = This test checks if we can create a new zone of the type
> 'bridge'
> +
> +copy_from = ../../../../@PACKAGE_NAME@-@PACKAGE_VERSION@.tar.gz
> +copy_to = /root/
> +
> +[VIRTUAL_ENVIRONMENT]
> +path = ../../virtual-environment/basic

diff mbox series

Patch

diff --git a/Makefile.am b/Makefile.am
index e56d0fb..e717133 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -596,17 +596,21 @@  CLEANFILES += \
 
 NITSI_TESTS = \
 	test/nitsi/test/hello-world \
-	test/nitsi/test/make-check
+	test/nitsi/test/make-check \
+	test/nitsi/test/zone-new-bridge
 
 EXTRA_DIST += \
 	test/nitsi/test/hello-world/recipe \
 	test/nitsi/test/hello-world/settings \
 	test/nitsi/test/make-check/recipe.in \
-	test/nitsi/test/make-check/settings.in
+	test/nitsi/test/make-check/settings.in \
+	test/nitsi/test/zone-new-bridge/recipe \
+	test/nitsi/test/zone-new-bridge/settings.in
 
 CLEANFILES += \
 	test/nitsi/test/make-check/recipe \
-	test/nitsi/test/make-check/settings
+	test/nitsi/test/make-check/settings \
+	test/nitsi/test/zone-new-bridge/settings
 
 NITSI_ENVIRONMENT =
 
diff --git a/test/nitsi/test/zone-new-bridge/recipe b/test/nitsi/test/zone-new-bridge/recipe
new file mode 100644
index 0000000..6c054df
--- /dev/null
+++ b/test/nitsi/test/zone-new-bridge/recipe
@@ -0,0 +1,9 @@ 
+include: ../../include/make-install
+include: ../../include/network-settings
+include: ../../include/network-reset
+all: network zone new upl0 bridge
+# this returns zero if the device exists
+all: ip link show upl0
+all: ls /sys/class/net/upl0
+# check that the config dir exists
+all: ls /etc/network/zones/upl0
diff --git a/test/nitsi/test/zone-new-bridge/settings.in b/test/nitsi/test/zone-new-bridge/settings.in
new file mode 100644
index 0000000..207cfa0
--- /dev/null
+++ b/test/nitsi/test/zone-new-bridge/settings.in
@@ -0,0 +1,9 @@ 
+[GENERAL]
+name = zone-new-bridge
+description = This test checks if we can create a new zone of the type 'bridge'
+
+copy_from = ../../../../@PACKAGE_NAME@-@PACKAGE_VERSION@.tar.gz
+copy_to = /root/
+
+[VIRTUAL_ENVIRONMENT]
+path = ../../virtual-environment/basic