diff --git a/po/ar.po b/po/ar.po index af1ad3a..8672a1d 100644 --- a/po/ar.po +++ b/po/ar.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Arabic (http://www.transifex.com/mstremer/ipfire/language/" @@ -397,6 +397,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -411,10 +433,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -722,13 +750,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "البيانات المخزنة مؤقتا" @@ -833,9 +854,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -860,11 +878,23 @@ msgstr "متوسط" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -926,6 +956,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "استهلاك الذاكرة" @@ -946,10 +1013,54 @@ msgstr "البيانات المخزنة مؤقتا" msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -998,6 +1109,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "استهلاك الذاكرة" diff --git a/po/cs_CZ.po b/po/cs_CZ.po index 40818f1..6db5be9 100644 --- a/po/cs_CZ.po +++ b/po/cs_CZ.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2026-07-17 19:27+0000\n" "Last-Translator: Pavel Borecki \n" "Language-Team: Czech 0%" msgstr "Ztrátovost paketů > 0%" @@ -857,11 +875,23 @@ msgstr "Průměrná doba odezvy" msgid "Latency" msgstr "Doba odezvy" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -922,6 +952,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Využití paměti" @@ -939,10 +1006,54 @@ msgstr "V mězipaměti" msgid "Swap" msgstr "Odkládací prostor" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -990,6 +1101,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + msgid "Processor Usage" msgstr "Vytížení procesoru" @@ -1759,6 +1900,9 @@ msgid "" "line changes colour below -50, -60 and -70 dBm." msgstr "" +#~ msgid "Latency to the Default Gateway" +#~ msgstr "Doba odezvy na výchozí bránu" + #~ msgid "Bits Per Second" #~ msgstr "Bitů za sekundu" diff --git a/po/da.po b/po/da.po index 15ac20d..bfad406 100644 --- a/po/da.po +++ b/po/da.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Danish (http://www.transifex.com/mstremer/ipfire/language/" @@ -396,6 +396,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -410,10 +432,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -721,13 +749,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "Cached data" @@ -832,9 +853,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -859,11 +877,23 @@ msgstr "Gennemsnit" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -925,6 +955,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Hukommelsesforbrug" @@ -945,10 +1012,54 @@ msgstr "Cached data" msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -997,6 +1108,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "Hukommelsesforbrug" diff --git a/po/de.po b/po/de.po index 7071da4..8b5abb2 100644 --- a/po/de.po +++ b/po/de.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2026-04-10 10:54+0000\n" "Last-Translator: Amazon Translate \n" "Language-Team: German 0%" msgstr "Paketverlust > 0%" @@ -859,11 +877,23 @@ msgstr "Durchschnittliche Latenz" msgid "Latency" msgstr "Latenz" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -924,6 +954,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Speicher-Auslastung" @@ -941,10 +1008,54 @@ msgstr "Zwischengespeichert" msgid "Swap" msgstr "Auslagerungsspeicher" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -992,6 +1103,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + msgid "Processor Usage" msgstr "Prozessorauslastung" @@ -1762,6 +1903,9 @@ msgid "" "line changes colour below -50, -60 and -70 dBm." msgstr "" +#~ msgid "Latency to the Default Gateway" +#~ msgstr "Latenz zum Standard-Gateway" + #~ msgid "Bits Per Second" #~ msgstr "Bit pro Sekunde" diff --git a/po/es.po b/po/es.po index e086766..dda7890 100644 --- a/po/es.po +++ b/po/es.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2026-04-30 23:47+0000\n" "Last-Translator: Roberto Peña \n" "Language-Team: Spanish 0%" msgstr "Pérdida de paquetes > 0%" @@ -858,11 +876,23 @@ msgstr "Latencia promedio" msgid "Latency" msgstr "Latencia" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -923,6 +953,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Uso de memoria" @@ -940,10 +1007,54 @@ msgstr "En caché" msgid "Swap" msgstr "Intercambio" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -991,6 +1102,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + msgid "Processor Usage" msgstr "Uso del Procesador" @@ -1760,6 +1901,9 @@ msgid "" "line changes colour below -50, -60 and -70 dBm." msgstr "" +#~ msgid "Latency to the Default Gateway" +#~ msgstr "Latencia a la puerta de enlace predeterminada" + #~ msgid "Bits Per Second" #~ msgstr "Bits por segundo" diff --git a/po/fa.po b/po/fa.po index 5c783ab..76d3cfc 100644 --- a/po/fa.po +++ b/po/fa.po @@ -10,7 +10,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Persian (http://www.transifex.com/mstremer/ipfire/language/" @@ -398,6 +398,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -412,10 +434,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -723,13 +751,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "دیتای کش شده" @@ -834,9 +855,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -861,11 +879,23 @@ msgstr "میانه" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -927,6 +957,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "حافظه استفاده شده" @@ -947,10 +1014,54 @@ msgstr "دیتای کش شده" msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -999,6 +1110,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "حافظه استفاده شده" diff --git a/po/fr.po b/po/fr.po index 09c6a1d..bdb1c14 100644 --- a/po/fr.po +++ b/po/fr.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: French (http://www.transifex.com/mstremer/ipfire/language/" @@ -397,6 +397,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -411,10 +433,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -722,13 +750,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "Information en cache" @@ -833,9 +854,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -860,11 +878,23 @@ msgstr "Moyenne" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -926,6 +956,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Utilisation mémoire" @@ -946,10 +1013,54 @@ msgstr "Information en cache" msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -998,6 +1109,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "Utilisation mémoire" diff --git a/po/hr.po b/po/hr.po index 568538b..13c5b79 100644 --- a/po/hr.po +++ b/po/hr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Croatian (http://www.transifex.com/mstremer/ipfire/language/" @@ -396,6 +396,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -410,10 +432,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -721,13 +749,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "Cacheirano podataka" @@ -832,9 +853,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -859,11 +877,23 @@ msgstr "Prosječan" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -925,6 +955,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Korištenje memorije" @@ -945,10 +1012,54 @@ msgstr "Cacheirano podataka" msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -997,6 +1108,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "Korištenje memorije" diff --git a/po/hu.po b/po/hu.po index 4aba521..30d5494 100644 --- a/po/hu.po +++ b/po/hu.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Hungarian (http://www.transifex.com/mstremer/ipfire/language/" @@ -396,6 +396,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -410,10 +432,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -721,13 +749,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "Gyorsítótrazott adat" @@ -832,9 +853,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -859,11 +877,23 @@ msgstr "Átlag" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -925,6 +955,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Memóriahasználat" @@ -945,10 +1012,54 @@ msgstr "Gyorsítótrazott adat" msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -997,6 +1108,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "Memóriahasználat" diff --git a/po/id.po b/po/id.po index ba6f01d..f9c85fc 100644 --- a/po/id.po +++ b/po/id.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Indonesian (http://www.transifex.com/mstremer/ipfire/language/" @@ -396,6 +396,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -410,10 +432,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -721,13 +749,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "Data cache/tembolok" @@ -832,9 +853,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -859,11 +877,23 @@ msgstr "Rata-rata" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -925,6 +955,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Memori Dipakai" @@ -945,10 +1012,54 @@ msgstr "Data cache/tembolok" msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -997,6 +1108,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "Memori Dipakai" diff --git a/po/it.po b/po/it.po index 08f01ac..bc9cedc 100644 --- a/po/it.po +++ b/po/it.po @@ -12,7 +12,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2026-10-09 13:12+0000\n" "Last-Translator: \"umberto p.\" \n" "Language-Team: Italian 0%" msgstr "Perdita di pacchetti > 0%" @@ -861,11 +879,23 @@ msgstr "Latenza media" msgid "Latency" msgstr "Latenza" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -926,6 +956,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Uso della memoria" @@ -943,10 +1010,54 @@ msgstr "Dati memorizzati nella cache" msgid "Swap" msgstr "Swap" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -994,6 +1105,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + msgid "Processor Usage" msgstr "Uso della memoria" @@ -1763,6 +1904,9 @@ msgid "" "line changes colour below -50, -60 and -70 dBm." msgstr "" +#~ msgid "Latency to the Default Gateway" +#~ msgstr "Latenza verso il gateway predefinito" + #~ msgid "Bits Per Second" #~ msgstr "Bit al secondo" diff --git a/po/km_KH.po b/po/km_KH.po index ac6b885..8dc1a48 100644 --- a/po/km_KH.po +++ b/po/km_KH.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Khmer (Cambodia) (http://www.transifex.com/mstremer/ipfire/" @@ -396,6 +396,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -410,10 +432,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -721,13 +749,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "Cached data" @@ -832,9 +853,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -859,11 +877,23 @@ msgstr "មធ្យម" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -925,6 +955,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "ប្រើ Memory" @@ -945,10 +1012,54 @@ msgstr "Cached data" msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -997,6 +1108,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "ប្រើ Memory" diff --git a/po/lo.po b/po/lo.po index f3cf549..7ab83aa 100644 --- a/po/lo.po +++ b/po/lo.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2026-07-13 08:16+0000\n" "Last-Translator: Bone NI \n" "Language-Team: Lao 0%" msgstr "ແພັກເກັດເສຍຫາຍ > 0%" @@ -856,11 +874,23 @@ msgstr "ຄວາມໜ່ວງສະເລ່ຍ" msgid "Latency" msgstr "ຄວາມໜ່ວງ" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -921,6 +951,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "ການນຳໃຊ້ໜ່ວຍຄວາມຈຳ" @@ -938,10 +1005,54 @@ msgstr "ແຄສ" msgid "Swap" msgstr "ສະວັອບ" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -989,6 +1100,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + msgid "Processor Usage" msgstr "ການນຳໃຊ້ໂປຣເຊດເຊີ" @@ -1758,6 +1899,9 @@ msgid "" "line changes colour below -50, -60 and -70 dBm." msgstr "" +#~ msgid "Latency to the Default Gateway" +#~ msgstr "ຄວາມໜ່ວງໄປຫາ ເກດເວເລີ່ມຕົ້ນ" + #~ msgid "Bits Per Second" #~ msgstr "ບິດ ຕໍ່ ວິນາທີ" diff --git a/po/nl.po b/po/nl.po index 61a167f..e4b3cc1 100644 --- a/po/nl.po +++ b/po/nl.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Dutch (http://www.transifex.com/mstremer/ipfire/language/" @@ -396,6 +396,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -410,10 +432,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -721,13 +749,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "Gecachte data" @@ -832,9 +853,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -859,11 +877,23 @@ msgstr "Gemiddeld" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -925,6 +955,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Geheugengebruik" @@ -945,10 +1012,54 @@ msgstr "Gecachte data" msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -997,6 +1108,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "Geheugengebruik" diff --git a/po/pl.po b/po/pl.po index 37b94dd..d8dca89 100644 --- a/po/pl.po +++ b/po/pl.po @@ -10,7 +10,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Polish (http://www.transifex.com/mstremer/ipfire/language/" @@ -399,6 +399,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -413,10 +435,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -724,13 +752,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "buforowane danych" @@ -835,9 +856,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -862,11 +880,23 @@ msgstr "średnia" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -928,6 +958,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "użycia pamięci" @@ -948,10 +1015,54 @@ msgstr "buforowane danych" msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -1000,6 +1111,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "użycia pamięci" diff --git a/po/pt_BR.po b/po/pt_BR.po index cbddde2..1c2f041 100644 --- a/po/pt_BR.po +++ b/po/pt_BR.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Portuguese (Brazil) (http://www.transifex.com/mstremer/ipfire/" @@ -396,6 +396,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -410,10 +432,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -721,13 +749,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "Dados em cache." @@ -832,9 +853,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -859,11 +877,23 @@ msgstr "Média" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -925,6 +955,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Uso de memória." @@ -945,10 +1012,54 @@ msgstr "Dados em cache." msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -997,6 +1108,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "Uso de memória." diff --git a/po/ru.po b/po/ru.po index 7a396b3..b5b30d3 100644 --- a/po/ru.po +++ b/po/ru.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Russian (http://www.transifex.com/mstremer/ipfire/language/" @@ -399,6 +399,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -413,10 +435,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -724,13 +752,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "Данных в кэше" @@ -835,9 +856,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -862,11 +880,23 @@ msgstr "Приблизительно" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -928,6 +958,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Использование памяти" @@ -948,10 +1015,54 @@ msgstr "Данных в кэше" msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -1000,6 +1111,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "Использование памяти" diff --git a/po/sq.po b/po/sq.po index d755a1c..f16a63f 100644 --- a/po/sq.po +++ b/po/sq.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Albanian (http://www.transifex.com/mstremer/ipfire/language/" @@ -396,6 +396,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -410,10 +432,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -721,13 +749,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "Kafazi t'dhënave " @@ -832,9 +853,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -859,11 +877,23 @@ msgstr "Mesatar" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -925,6 +955,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Përdorimi Memories" @@ -945,10 +1012,54 @@ msgstr "Kafazi t'dhënave " msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -997,6 +1108,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "Përdorimi Memories" diff --git a/po/sv.po b/po/sv.po index e2a7426..277595d 100644 --- a/po/sv.po +++ b/po/sv.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Swedish (http://www.transifex.com/mstremer/ipfire/language/" @@ -396,6 +396,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -410,10 +432,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -721,13 +749,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "Cachad data" @@ -832,9 +853,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -859,11 +877,23 @@ msgstr "Snitt" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -925,6 +955,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Minnesanvändning" @@ -945,10 +1012,54 @@ msgstr "Cachad data" msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -997,6 +1108,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "Minnesanvändning" diff --git a/po/tr.po b/po/tr.po index 4d767a1..8f1f303 100644 --- a/po/tr.po +++ b/po/tr.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Turkish (http://www.transifex.com/mstremer/ipfire/language/" @@ -396,6 +396,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -410,10 +432,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -721,13 +749,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "Önbelleğe alınmış veri" @@ -832,9 +853,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -859,11 +877,23 @@ msgstr "Ortalama" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -925,6 +955,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Kullanılan Bellek" @@ -945,10 +1012,54 @@ msgstr "Önbelleğe alınmış veri" msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -997,6 +1108,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "Kullanılan Bellek" diff --git a/po/uk.po b/po/uk.po index 332778b..f085f04 100644 --- a/po/uk.po +++ b/po/uk.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: IPFire Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-10-24 15:30+0000\n" +"POT-Creation-Date: 2026-10-26 13:14+0000\n" "PO-Revision-Date: 2015-10-26 17:22+0000\n" "Last-Translator: Michael Tremer \n" "Language-Team: Ukrainian (http://www.transifex.com/mstremer/ipfire/language/" @@ -397,6 +397,28 @@ msgid "" "means the network card could not keep up. Occasional drops are normal." msgstr "" +#, c-format +msgid "Link Losses - %s" +msgstr "" + +msgid "Link Losses" +msgstr "" + +#. Header +#. Show the total queries +#. Show the total throughput +#. Header +#. Show the total usage +#. Show the total queries +msgid "Total" +msgstr "" + +msgid "" +"How often this interface has lost its link (the carrier), e.g. because a " +"cable has been unplugged or the other side has been restarted. Losses that " +"keep coming back point to a bad cable, port or modem." +msgstr "" + #, c-format msgid "Packets - %s" msgstr "" @@ -411,10 +433,16 @@ msgstr "" msgid "Throughput - %s" msgstr "" +#. Show the speed of the link, but don't scale the graph for it as it would +#. usually be far above the throughput +msgid "Link Speed" +msgstr "" + msgid "" "Traffic in bits per second that this interface has received (incoming) and " "sent (outgoing), including traffic that the firewall forwards between " -"networks." +"networks. The dashed line shows the speed of the link once the traffic comes " +"close to it." msgstr "" msgid "Header Errors" @@ -722,13 +750,6 @@ msgstr "" msgid "Cache Performance" msgstr "" -#. Show the total queries -#. Show the total throughput -#. Show the total usage -#. Show the total queries -msgid "Total" -msgstr "" - #, fuzzy msgid "Cache Hits" msgstr "Даних в кеші" @@ -833,9 +854,6 @@ msgid "" "answers. A growing share in the slower bands means slower lookups." msgstr "" -msgid "Latency to the Default Gateway" -msgstr "" - #. Fill the background if the loss is within the range msgid "Packet Loss > 0%" msgstr "" @@ -860,11 +878,23 @@ msgstr "Приблизно" msgid "Latency" msgstr "" +msgid "Latency to the Default Gateway (IPv4)" +msgstr "" + msgid "" -"Round-trip time to the default gateway, measured with ten pings at a time " -"(ARP pings on Ethernet). The shaded band shows how much the pings varied, a " -"coloured background shows packet loss. High or jumpy values point to a busy " -"or faulty uplink." +"Round-trip time to the IPv4 default gateway, measured with ten pings at a " +"time (ARP pings on Ethernet). The shaded band shows how much the pings " +"varied, a coloured background shows packet loss. High or jumpy values point " +"to a busy or faulty uplink." +msgstr "" + +msgid "Latency to the Default Gateway (IPv6)" +msgstr "" + +msgid "" +"Round-trip time to the IPv6 default gateway, measured with ten pings at a " +"time. The shaded band shows how much the pings varied, a coloured background " +"shows packet loss. High or jumpy values point to a busy or faulty uplink." msgstr "" msgid "Dropped Packets To Hostile Networks" @@ -926,6 +956,43 @@ msgid "" "cores, the system has more work than it can handle." msgstr "" +#, c-format +msgid "RAID Disks - %s" +msgstr "" + +msgid "Disks" +msgstr "" + +#. Draw the outlines afterwards +msgid "Working" +msgstr "" + +msgid "Missing" +msgstr "" + +msgid "Mismatched Sectors" +msgstr "" + +msgid "" +"The disks of this software RAID array that are working, and those that are " +"missing or have failed. The array keeps running with missing disks, but a " +"failed disk should be replaced soon. Mismatched sectors have been found by " +"the last check and point to a disk with problems." +msgstr "" + +#, c-format +msgid "RAID Synchronisation - %s" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "" +"How far a software RAID array has been synchronised while it is being " +"rebuilt (e.g. after a disk has been replaced) or checked. The array is " +"slower while this is going on. Nothing is shown when it is idle." +msgstr "" + msgid "Memory Usage" msgstr "Використання пам'яті" @@ -946,10 +1013,54 @@ msgstr "Даних в кеші" msgid "Swap" msgstr "" +#. Show how much is being swapped in and out (only in the legend since it +#. cannot share the axis with the amount of memory) +msgid "Swapped In" +msgstr "" + +msgid "B/s" +msgstr "" + +msgid "Swapped Out" +msgstr "" + msgid "" "How the memory is used by programs (Used) and for buffers and cache, which " "speed up disk access and are given back when programs need memory. The " -"dashed line shows swap; growing swap use means memory is short." +"dashed line shows swap; growing swap use or a lot of swapping in and out " +"means memory is short." +msgstr "" + +msgid "Page Faults" +msgstr "" + +msgid "Page Faults/s" +msgstr "" + +#. Only draw the major faults, because there are usually thousands of minor +#. faults for every major one, which would not be visible any more +msgid "Major" +msgstr "" + +msgid "Minor" +msgstr "" + +msgid "" +"How often per second programs had to wait for memory to be read from disk " +"(major page faults), e.g. from swap. Many of them slow the system down and " +"mean memory is short. Minor faults are cheap and normal, so they are only " +"listed below." +msgstr "" + +msgid "Out-Of-Memory Kills" +msgstr "" + +msgid "Kills" +msgstr "" + +msgid "" +"Processes that the kernel has killed because the system ran out of memory. " +"Anything above zero means that programs have been stopped against their will." msgstr "" msgid "" @@ -998,6 +1109,36 @@ msgid "" "high values mean memory is running short." msgstr "" +msgid "Processes" +msgstr "" + +msgid "Running" +msgstr "" + +msgid "Waiting for I/O" +msgstr "" + +msgid "" +"How many processes are running on a processor or are ready to run, and how " +"many are waiting for disks or other I/O. Many waiting processes point to " +"slow storage." +msgstr "" + +msgid "Process Creation" +msgstr "" + +msgid "Processes/s" +msgstr "" + +msgid "New Processes" +msgstr "" + +msgid "" +"How many new processes and threads are being created per second. A sudden " +"rise often means that a service keeps restarting or a script is running in a " +"loop." +msgstr "" + #, fuzzy msgid "Processor Usage" msgstr "Використання пам'яті"