netpbm: Removal of netpbm config.mk

Message ID 20241014165547.16073-1-adolf.belka@ipfire.org
State New
Headers
Series netpbm: Removal of netpbm config.mk |

Commit Message

Adolf Belka Oct. 14, 2024, 4:55 p.m. UTC
  - netpbm addon was removed from IPFire in April 2022. This configuration file was
   missed at that time.

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 config/netpbm/config.mk | 690 ----------------------------------------
 1 file changed, 690 deletions(-)
 delete mode 100644 config/netpbm/config.mk
  

Comments

Michael Tremer Oct. 17, 2024, 3:07 p.m. UTC | #1
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>

> On 14 Oct 2024, at 17:55, Adolf Belka <adolf.belka@ipfire.org> wrote:
> 
> - netpbm addon was removed from IPFire in April 2022. This configuration file was
>   missed at that time.
> 
> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
> ---
> config/netpbm/config.mk | 690 ----------------------------------------
> 1 file changed, 690 deletions(-)
> delete mode 100644 config/netpbm/config.mk
> 
> diff --git a/config/netpbm/config.mk b/config/netpbm/config.mk
> deleted file mode 100644
> index 0cb85db6e..000000000
> --- a/config/netpbm/config.mk
> +++ /dev/null
> @@ -1,690 +0,0 @@
> -####This file was automatically created by 'configure.'
> -####Many variables are set twice -- a generic setting, then 
> -####a system-specific override at the bottom of the file.
> -####
> -# This is a make file inclusion, to be included in all the Netpbm make
> -# files.
> -
> -# This file is meant to contain variable settings that customize the
> -# build for a particular target system configuration.
> -
> -# The distribution contains the file config.mk.in.  You edit
> -# config.mk.in in ways relevant to your particular environment 
> -# to create config.mk.  The "configure" program will do this
> -# for you in simple cases.
> -
> -# Some of the variables that the including make file must set for this
> -# file to work:
> -#
> -#  SRCDIR: The directory at the top of the Netpbm source tree.  Note that
> -#  this is typically a relative directory, and it must be relative to the
> -#  make file that includes this file.
> -
> -DEFAULT_TARGET = nonmerge
> -#DEFAULT_TARGET = merge
> -
> -# Fiasco has some special requirements that make it fail to compile on
> -# some systems, and since it isn't very important, just set this to "N"
> -# and skip it on those systems unless you want to debug it and fix it.
> -# OpenBSD:
> -#BUILD_FIASCO = N
> -BUILD_FIASCO = Y
> -
> -# The following are commands for the build process to use.  These values
> -# do not get built into anything.
> -
> -# The C compiler (including macro preprocessor)
> -#CC = gcc
> -# Note that 'cc' is usually an alias for whatever is the main compiler
> -# on a system, e.g. the GNU Compiler on Linux.
> -CC = cc
> -
> -# The linker.
> -LD = $(CC)
> -#LD = ld
> -#Tru64:
> -#LD = cc
> -#LD = gcc 
> -
> -#If the linker identified above is a compiler that invokes a linker
> -#(as in 'cc foo.o -o foo'), set LINKERISCOMPILER.  The main difference is
> -#that we expect a compiler to take linker options in the '-Wl,-opt1,val1'
> -#syntax whereas the actual linker would take '-opt1 val1'.
> -LINKERISCOMPILER=Y
> -#If $(LD) is 'ld':
> -#LINKERISCOMPILER=N
> -
> -#LINKER_CAN_DO_EXPLICIT_LIBRARY means the linker specified above can
> -#take a library as just another link object argument, as in 'ld
> -#pnmtojpeg.o /usr/local/lib/libjpeg.so ...'  as opposed to requiring a
> -#-l option as in 'ld pnmtojpeg.o -L/usr/local/lib -l jpeg'.
> -#This variable controls how 'libopt' gets built.  Note that with some
> -#linkers, you can specify a shared library explicitly, but then it has
> -#to live in that exact place at run time.  That's not good enough for us.
> -
> -LINKER_CAN_DO_EXPLICIT_LIBRARY=N
> -#GNU:
> -#LINKER_CAN_DO_EXPLICIT_LIBRARY=Y
> -
> -# This is the name of the header file that declares the types
> -# uint32_t, etc.  This name is used as #include $(INTTYPES_H)  .
> -# Set to null if the types come automatically without including anything.
> -
> -# We have a report (2005.09.17) that on IRIX 5.3 with the native IDO
> -# cc, inttypes.h and sys/types.h conflict (and Netpbm programs include
> -# sys/types for other things), so for that environment, <inttypes.h>
> -# won't work, but "inttypes_netpbm.h" might.
> -
> -INTTYPES_H = <inttypes.h>
> -# Linux libc5:
> -#INTTYPES_H = <types.h>
> -# Solaris:
> -# Solaris has <sys/inttypes.h>, but it doesn't define int_fast2_t, etc.
> -#INTTYPES_H = "inttypes_netpbm.h"
> -# Others:
> -#INTTYPES_H = <sys/stdint.h>
> -#INTTYPES_H = <sys/types.h>
> -# The automatically generated Netpbm version:
> -#INTTYPES_H = "inttypes_netpbm.h"
> -
> -# HAVE_INT64 tells whether, assuming you include the header indicated by
> -# INTTYPES_H, you have the int64_t type and related stuff.  (If you don't
> -# the build will omit certain code that does 64 bit computations).
> -HAVE_INT64 = Y
> -#HAVE_INT64 = N
> -
> -# WANT_SSE tells whether the build should use SSE instructions, via the the
> -# standard SSE intrinsics (operators such as '_mm_movemask_epi8').  SSE
> -# instructions are faster than traditional instructions, but aren't available
> -# on all CPUs.  Also, the standard intrinsics are not available in all
> -# compilers.  Even if you say N here, Netpbm may still be built with some
> -# SSE exploitation (e.g. SSE floating point) because the compiler will 
> -# do it automatically.  You can add a -nomsse or -nomsse2 option to
> -# CFLAGS or CFLAGS_PERSONAL to stop that.
> -WANT_SSE = N
> -#WANT_SSE = Y
> -
> -# CC and LD are for building the Netpbm programs, which are not necessarily
> -# intended to run on the same system on which Make is running.  But when we 
> -# build a build tool such as Libopt, it is meant to run only on the same 
> -# system on which the Make is running.  The variables below define programs
> -# to use to compile and link build tools.
> -CC_FOR_BUILD = $(CC)
> -LD_FOR_BUILD = $(LD)
> -CFLAGS_FOR_BUILD = $(CFLAGS_CONFIG)
> -LDFLAGS_FOR_BUILD = $(LDFLAGS)
> -
> -# WINDRES is the program that creates a linkable object file from 
> -# a Windows Icon (.ico) file.
> -WINDRES = windres
> -
> -# MAKE is set automatically by Make to what was used to invoke Make.
> -
> -INSTALL = $(SRCDIR)/buildtools/install.sh
> -#Solaris:
> -#INSTALL = /usr/ucb/install
> -#Tru64:
> -#INSTALL = installbsd
> -#OSF1:
> -#INSTALL = $(SRCDIR)/buildtools/installosf
> -#Red Hat Linux:
> -#INSTALL = install
> -
> -# STRIPFLAG is the option you pass to the above install program to make it
> -# strip unnecessary information out of binaries.
> -STRIPFLAG = -s
> -# If you don't want to strip the binaries, just leave it null:
> -#STRIPFLAG = 
> -
> -SYMLINK = ln -s
> -# At least some Windows environments don't have any concept of symbolic
> -# links, but direct copies are usually a passable alternative.
> -#SYMLINK = cp
> -
> -#MANPAGE_FORMAT is "nroff" or "cat".  It determines in what format the
> -#pointer man pages are installed (ready to nroff, or ready to cat).  
> -#A pointer man pages is just a single-paragraph pages that tells you there is
> -#no man page for the program, to look at the HTML documentation instead.
> -MANPAGE_FORMAT = nroff
> -#MANPAGE_FORMAT = cat
> -
> -AR = ar
> -RANLIB = ranlib
> -# IRIX, SCO don't have Ranlib:
> -#RANLIB = true
> -
> -# LEX is the beginning of a shell command that runs a Lex-like
> -# pattern matcher generator.  Null string means there isn't any such
> -# command.  That means the build will skip parts that need one.
> -
> -LEX = flex
> -# Solaris:
> -# LEX = flex -e
> -# Windows Mingw:
> -# LEX =
> -# 
> -# LEX = lex
> -
> -# C compiler options 
> -
> -# gcc:
> -# -ansi and -Werror should work too, but are not included
> -# by default because there's no point in daring the build to fail.
> -# -pedantic isn't a problem because it causes at worst a warning.
> -#CFLAGS = -O3 -ffast-math -pedantic -fno-common \
> -#          -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit \
> -#          -Wwrite-strings -Wmissing-prototypes -Wundef -Wno-unknown-pragmas
> -# The merged programs have a main_XXX subroutine instead of main(),
> -# which would cause a warning with -Wmissing-declarations or 
> -# -Wmissing-prototypes.
> -#CFLAGS_MERGE = -Wno-missing-declarations -Wno-missing-prototypes
> -# A user of DEC Tru64 4.0F in May 2000 needed -DLONG_32 for ppmtompeg,
> -# but word size-sensitive code was removed from parallel.c in September 2004.
> -# A user of Tru64 5.1A in July 2003 needed NOT to have -DLONG_32.  In
> -# theory, you need this if on your system, long is 32 bits and int is not.
> -# But it may be completely irrelevant today.
> -#Tru64:
> -#CFLAGS = -O2 -std1 -DLONG_32
> -#CFLAGS = -O2 -std1
> -#AIX:
> -#CFLAGS= -O3
> -#HP-UX:
> -#CFLAGS= -O3 -fPIC
> -#IRIX:
> -#CFLAGS= -n32 -O3
> -#Amiga with GNU compiler:
> -#CFLAGS= -m68020-60 -ffast-math -mstackextend 
> -# You can add -noixemul for Amiga and successfully compile most of the 
> -# programs.  (Of the remaining ones, if you can supply your own strtod() 
> -# function, most of them will build with -noixemul).  So try building 
> -# with 'make --keep-going CADD=-noixemul' first, then just 'make' to build
> -# everything that failed for lack of the ixemul library in the first step.
> -# That way, the parts that don't required the ixemul library won't indicate
> -# a dependency on it.
> -#OpenBSD:
> -#CFLAGS = -I/usr/local/include
> -
> -# EXE is a suffix that the linker puts on any executable it generates.
> -# In cygwin, this is .exe and most programs deal with its existence without
> -# us having to know about it.  Some don't though, so set this:
> -
> -EXE =
> -#Cygwin, DJGPP/Windows:
> -#EXE = .exe
> -  
> -# linker options.  
> -
> -# LDFLAGS is often set as an environment variable;  A setting here overrides
> -# it.  So either make sure you want to override it, or do a "LDFLAGS +=" here.
> -
> -# LDFLAGS is usually not the right place for a -L option, because we put
> -# LDFLAGS _before_ our own -L options, so it would cancel out our
> -# specific selection of libraries.  For example, if you say
> -# LDFLAGS=/usr/local/lib and an old copy of the libnetpbm is in
> -# /usr/local/lib, then you'd be linking against that old copy instead of
> -# the copy you just built, which is located by a -L option later on the
> -# link command.  LIBS is the right variable for adding -L options.  LIBS
> -# goes after any of our make files' own -L options.
> -
> -# Eunice users may want to use -noshare so that the executables can
> -# run standalone:
> -#LDFLAGS += -noshare
> -#Tru64:
> -# Russ Allberry says on 2001.06.09 that -oldstyle_liblookup may be necessary
> -# to keep from finding an ancient system libjpeg.so that isn't compatible with
> -# NetPBM.  Michael Long found that /usr/local/lib is not in the default
> -# search path, or not soon enough, and he was getting an old libjpeg that
> -# caused all the jpeg symbol references to be unresolved.  He had installed
> -# a new libjpeg in /usr/local/lib.
> -#LDFLAGS += -call_shared -oldstyle_liblookup -L/usr/local/lib
> -#AIX:
> -#LDFLAGS += -L /usr/pubsw/lib
> -#HP-UX:
> -#LDFLAGS += -Wl,+b,/usr/pubsw/lib
> -#IRIX:
> -#LDFLAGS += -n32
> -
> -# Linker options for created Netpbm shared libraries.
> -
> -# Here, $(SONAME) resolves to the soname for the shared library being created.
> -# The following are gcc options.  This works on GNU libc systems.
> -LDSHLIB = -shared -Wl,-soname,$(SONAME)
> -# You need -nostart instead of -shared on BeOS.  Though the BeOS compiler is
> -# ostensibly gcc, it has the -nostart option, which is not mentioned in gcc
> -# documentation and doesn't exist in at least one non-BeOS installation.
> -# BeOS doesn't have sonames built in.
> -#LDSHLIB = -nostart
> -#LDSHLIB = -G
> -# Solaris, SunOS with GNU Ld, SCO:
> -# These systems have no soname option.
> -#LDSHLIB = -shared
> -# Solaris with Sun Ld:
> -#LDSHLIB = -Wl,-Bdynamic,-G,-h,$(SONAME) 
> -#Tru64:
> -#LDSHLIB = -shared -expect_unresolved "*"
> -#IRIX:
> -#LDSHLIB = -shared -n32
> -#AIX GNU compiler/linker:
> -#LDSHLIB = -shared
> -#AIX Visual Age C:
> -#LDSHLIB = -qmkshrobj
> -#Mac OSX:
> -# According to experiments done by Peter A Crowley in May 2007, if
> -# libnetpbm goes in a standard place such as /usr/local/lib,
> -# programs need not be built with libnetpbm's location included.
> -# But if it goes elsewhere, the link-editor must include the
> -# location in the executable.  It finds the runtime location by
> -# looking inside the library.  The information in the library
> -# comes from the install_name option with which the library was
> -# built.  It's an alternative to the -rpath option on other systems.
> -#LDSHLIB=-dynamiclib
> -#LDSHLIB=-dynamiclib -install_name $(NETPBMLIB_RUNTIME_PATH)/libnetpbm.$(MAJ).dylib
> -
> -# LDRELOC is the command to combine two .o files (relocateable object files)
> -# into a single .o file that can later be linked into something else.  NONE
> -# means no such command is available.
> -
> -LDRELOC = NONE
> -# GNU Ld:
> -# Older GNU Ld misspells the option as --relocateable.  Newer GNU Ld
> -# correctly spells it --relocatable.  The abbreviation --reloc works on
> -# both.
> -#LDRELOC = ld --reloc
> -#LDRELOC = ld -r
> -
> -
> -# On older systems, you have to make shared libraries out of position
> -# independent code, so you need -fpic or fPIC here.  (The rule is: if
> -# -fpic works, use it.  If it bombs, go to fPIC).  On newer systems,
> -# it isn't necessary, but can save real memory at the expense of
> -# execution speed.  Without position independent code, the library
> -# loader may have to patch addresses into the executable text.  On an
> -# older system, this would cause a program crash because the loader
> -# would be writing into read-only shared memory.  But on newer
> -# systems, the system silently creates a private mapping of the page
> -# or segment being modified (the "copy on write" phenomenon).  So it
> -# needs its own private real page frame.  In one experiment, A second
> -# copy of Pbmtext used 16K less real memory when built with -fpic than
> -# when built without.  2001.06.02.
> -
> -# We have seen -fPIC required on IA64 and AMD64 machines (GNU
> -# compiler/linker).  Build-time linking fails without it.  I don't
> -# know why -- history seems to be repeating itself.  2005.02.23.
> -
> -CFLAGS_SHLIB = 
> -# Gcc:
> -#CFLAGS_SHLIB = -fpic
> -#CFLAGS_SHLIB = -fPIC
> -# Sun compiler:
> -#CFLAGS_SHLIB = -Kpic
> -#CFLAGS_SHLIB = -KPIC
> -
> -# SHLIB_CLIB is the link option to include the C library in a shared library,
> -# normally "-lc".  On typical systems, this serves no purpose.  On some,
> -# though, it causes information about which C library to use to be recorded
> -# in the shared library and thus choose the correct library among several or
> -# avoid using an incompatible one.  But on some systems, the link fails.
> -# On 2002.09.30, "John H. DuBois III" <spcecdt@armory.com> reports that on 
> -# SCO OpenServer, he gets the following error message with -lc:
> -#
> -#  -lc; relocations referenced  ;  from file(s) /usr/ccs/lib/libc.so(random.o);
> -#   fatal error: relocations remain against allocatable but non-writable 
> -#   section: ; .text
> -
> -SHLIB_CLIB = -lc
> -# SCO:
> -#SHLIB_CLIB =
> -
> -# On some systems you have to build into an executable the list of
> -# directories where its dynamically linked libraries can be found at
> -# run time.  This is typically done with a -R or -rpath linker
> -# option.  Even on systems that don't require it, you might prefer to do
> -# that rather than set up environment variables or configuration files
> -# to tell the system where the libraries are.  A "Y" here means to put
> -# the directory information in the executable at link time.
> -
> -NEED_RUNTIME_PATH = N
> -# Solaris, SunOS, NetBSD, AIX:
> -#NEED_RUNTIME_PATH = Y
> -
> -# RPATHOPTNAME is the option you use on the link command to specify
> -# a runtime search path for a shared library.  It is meaningless unless
> -# NEED_RUNTIME_PATH is Y.
> -RPATHOPTNAME = -rpath
> -
> -# The following variables tell where your various libraries on which
> -# Netpbm depends live.  The LIBxxx variable is a full file
> -# specification of the link library (not necessarily the library used
> -# at run time).  e.g. "/usr/local/lib/graphics/libjpeg.so".  It usually
> -# doesn't matter if the library prefix and suffix are right -- you can
> -# use "lib" and ".so" or ".a" regardless of what your system actually
> -# uses because these just turn into "-L" and "-l" linker options
> -# anyway.  ".a" implies a static library for some purposes, though.
> -# If you don't have the library in question, use a value of NONE for
> -# LIBxxx and the build will simply skip the programs that require that
> -# library.  If the library is in your linker's (or the Netpbm build's)
> -# default search path, leave off the directory part, e.g. "libjpeg.so".
> -
> -# The xxxHDR_DIR variable is the directory in which the interface
> -# headers for the library live (e.g. /usr/include).  If they are in your
> -# compiler's default search path, set this variable to null.
> -
> -# This is where the Netpbm shared libraries will reside when Netpbm is
> -# fully installed.  In some configurations, the Netpbm builder builds
> -# this information into the Netpbm executables.  This does NOT affect
> -# where the Netpbm installer installs the libraries.  A null value
> -# means the libraries are in a default search path used by the runtime
> -# library loader.
> -NETPBMLIB_RUNTIME_PATH = 
> -#NETPBMLIB_RUNTIME_PATH = /usr/lib/netpbm
> -
> -# The TIFF library.  See above.  If you want to build the tiff
> -# converters, you must have the tiff library already installed.
> -
> -TIFFLIB = NONE
> -TIFFHDR_DIR =
> -
> -#TIFFLIB = libtiff.so
> -#TIFFHDR_DIR = /usr/include/libtiff
> -#NetBSD:
> -#TIFFLIB = $(LOCALBASE)/lib/libtiff.so
> -#TIFFHDR_DIR = $(LOCALBASE)/include
> -# OSF, Tru64:
> -#TIFFLIB = /usr/local1/DEC/lib/libtiff.so
> -#TIFFHDR_DIR = /usr/local1/DEC/include
> -
> -# Some TIFF libraries do Jpeg and/or Z (flate) compression and thus any
> -# program linked with the TIFF library needs a Jpeg and/or Z library.  Some
> -# TIFF libraries have such library statically linked in, but others need it to
> -# be linked with the program at link-edit time or dynamically at program load
> -# time.  Make this 'N' if your TIFF library doesn't need such linking.  As of
> -# 2005.01, the most usual build of the TIFF library appears to require both.
> -TIFFLIB_NEEDS_JPEG = Y
> -TIFFLIB_NEEDS_Z = Y
> -
> -# The JPEG library.  See above.  If you want to build the jpeg
> -# converters you must have the jpeg library already installed.
> -
> -# Tiff files can use JPEG compression, so the Tiff library can reference
> -# the JPEG library.  If your Tiff library references a dynamic JPEG 
> -# library, you must specify at least JPEGLIB here, or the Tiff
> -# converters will not build.  Note that your Tiff library may have the
> -# JPEG stuff statically linked in, in which case you won't need 
> -# JPEGLIB in order to build the Tiff converters.
> -
> -JPEGLIB = NONE
> -JPEGHDR_DIR =
> -#JPEGLIB = libjpeg.so
> -#JPEGHDR_DIR = /usr/include/jpeg
> -# Netbsd:
> -#JPEGLIB = ${LOCALBASE}/lib/libjpeg.so
> -#JPEGHDR_DIR = ${LOCALBASE}/include
> -# OSF, Tru64:
> -#JPEGLIB = /usr/local1/DEC/libjpeg.so
> -#JPEGHDR_DIR = /usr/local1/DEC/include
> -# Typical:
> -#JPEGLIB = /usr/local/lib/libjpeg.so
> -#JPEGHDR_DIR = /usr/local/include
> -# Don't build JPEG stuff:
> -#JPEGLIB = NONE
> -
> -
> -# The PNG library.  See above.  If you want to build the PNG
> -# converters you must have the PNG library already installed.
> -
> -# The PNG library, by convention starting around April 2002, gets installed
> -# with names that include a version number, such as libpng10.a and header
> -# files in /usr/include/libpng10.  But there is conventionally an unnumbered
> -# alias (e.g. libpng.a, /usr/include/libpng) for the preferred version.
> -#
> -# Recent versions of the library (since some time in the 2002-2006 period)
> -# have an associated 'libpng-config' that tells how to link it.  The make
> -# files will use that program if it exists (must be in the PATH).  In that
> -# case, PNGLIB and PNGHDR_DIR are irrelevant, but PNGVER is still meaningful,
> -# because the make file runs 'libpng$(PNGVER)-config'.
> -#
> -# Even more recent versions have the more modern Pkgconfig database entry
> -# to tell how to link it.  The make files will try to use that first.
> -#
> -# The normal way to choose the libpng the Netpbm build uses from among multiple
> -# versions on your system is not to mess with the variables below, but rather
> -# to mess with PKG_CONFIG_PATH or PATH environment variable so that the version
> -# you want to use appears first in the search path.
> -
> -PNGLIB = NONE
> -PNGHDR_DIR =
> -PNGVER = 
> -#PNGLIB = libpng$(PNGVER).so
> -#PNGHDR_DIR = /usr/include/libpng$(PNGVER)
> -# NetBSD:
> -#PNGLIB = $(LOCALBASE)/lib/libpng$(PNGVER).so
> -#PNGHDR_DIR = $(LOCALBASE)/include
> -# OSF/Tru64:
> -#PNGLIB = /usr/local1/DEC/lib/libpng$(PNGVER).so
> -#PNGHDR_DIR = /usr/local1/DEC/include
> -
> -# The zlib compression library.  See above.  You need it to build
> -# anything that needs the PNG library (see above).  If you selected
> -# NONE for the PNG library, it doesn't matter what you specify here --
> -# it won't get used.
> -#
> -# If you have 'libpng-config' (see above), these are irrelevant.
> -
> -ZLIB = NONE
> -ZHDR_DIR = 
> -#ZLIB = libz.so
> -
> -# The JBIG lossless image compression library (aka JBIG-KIT):
> -
> -JBIGLIB = $(INTERNAL_JBIGLIB)
> -JBIGHDR_DIR = $(INTERNAL_JBIGHDR_DIR)
> -
> -# The Jasper JPEG-2000 image compression library (aka JasPer):
> -JASPERLIB = $(INTERNAL_JASPERLIB)
> -JASPERHDR_DIR = $(INTERNAL_JASPERHDR_DIR)
> -# JASPERDEPLIBS is the libraries (-l options or file names) on which
> -# The Jasper library depends -- i.e. what you have to link into any
> -# executable that links in the Jasper library.
> -JASPERDEPLIBS =
> -#JASPERDEPLIBS = -ljpeg
> -
> -# And the Utah Raster Toolkit (aka URT aka RLE) library:
> -
> -URTLIB = $(BUILDDIR)/urt/librle.a
> -URTHDR_DIR = $(SRCDIR)/urt
> -
> -# The X11 library has facilities for talking to an X Window System
> -# server.  It is required by Pamx.
> -
> -X11LIB = NONE
> -X11HDR_DIR =
> -
> -#X11LIB = /usr/lib/libX11.so
> -#X11HDR_DIR =
> -
> -# The Linux SVGA library (Svgalib) is a facility for displaying graphics
> -# on the Linux console.  It is required by Ppmsvgalib.
> -
> -LINUXSVGALIB = NONE
> -LINUXSVGAHDR_DIR = 
> -
> -#LINUXSVGALIB = /usr/lib/libvga.so
> -#LINUXSVGAHDR_DIR = /usr/include/vgalib
> -
> -# WINICON_OBJECT is the object file to bind into all Netpbm executables
> -# to provide the icon for Windows to use for it.  Null for none.
> -WINICON_OBJECT =
> -#WINICON_OBJECT = $(BUILDDIR)/icon/netpbm.o
> -
> -# If you don't want any network functions, set OMIT_NETWORK to "Y".
> -# The only thing that requires network functions is the option in
> -# ppmtompeg to run it on multiple computers simultaneously.  On some
> -# systems network functions don't work or we haven't figured out how to 
> -# make them work, or they just aren't worth the effort.  
> -OMIT_NETWORK =
> -#DJGPP/Windows, Tru64:
> -#   (there's some minor header problem that prevents network functions from 
> -#   building on Tru64 2000.10.06)
> -#OMIT_NETWORK = Y
> -
> -# These are -l options to link in the network libraries.  Often, these are
> -# built into the standard C library, so this can be null.  This is irrelevant
> -# if OMIT_NETWORK is "Y".
> -
> -NETWORKLD = 
> -# Solaris, SunOS:
> -#NETWORKLD = -lsocket -lnsl
> -# SCO:
> -#NETWORKLD = -lsocket, -lresolv
> -
> -# DONT_HAVE_PROCESS_MGMT is Y if this system doesn't have the usual
> -# Unix process management stuff - fork, wait, etc.  N for a regular Unix
> -# system.
> -DONT_HAVE_PROCESS_MGMT = N
> -
> -# The following variables are used only by 'make install' (and the
> -# variants of it).  Paths here don't, for example, get built into any
> -# programs.
> -
> -# This is where everything goes when you do 'make package', unless you
> -# override it by setting 'pkgdir' on the Make command line.
> -PKGDIR_DEFAULT = /tmp/netpbm
> -
> -# This is where test results are written when you do 'make check', unless
> -# you override it by setting 'resultdir' on the Make command line.
> -RESULTDIR_DEFAULT = /tmp/netpbm-test
> -
> -# Subdirectory of the package directory ($(pkgdir)) in which man pages
> -# go.
> -PKGMANDIR = share/man
> -
> -# File permissions for installed files.
> -# Note that on some systems (e.g. Solaris), 'install' can't use the 
> -# mnemonic permissions - you have to use octal.
> -
> -# binaries (pbmmake, etc)
> -INSTALL_PERM_BIN =  755       # u=rwx,go=rx
> -# shared libraries (libpbm.so, etc)
> -INSTALL_PERM_LIBD = 755       # u=rwx,go=rx
> -# static libraries (libpbm.a, etc)
> -INSTALL_PERM_LIBS = 644       # u=rw,go=r
> -# header files (pbm.h, etc)
> -INSTALL_PERM_HDR =  644       # u=rw,go=r
> -# man pages (pbmmake.1, etc)
> -INSTALL_PERM_MAN =  644       # u=rw,go=r
> -# data files (pnmtopalm color maps, etc)
> -INSTALL_PERM_DATA = 644       # u=rw,go=r
> -
> -# Specify the suffix that want the man pages to have.
> -
> -SUFFIXMANUALS1 = 1
> -SUFFIXMANUALS3 = 3
> -SUFFIXMANUALS5 = 5
> -
> -#NETPBMLIBTYPE tells the kind of libraries that will get built to hold the
> -#Netpbm library functions.  The value is used only in make file tests.
> -# "unixshared" means a unix-style shared library, typically named like 
> -# libxyz.so.2.3
> -NETPBMLIBTYPE = unixshared
> -# "unixstatic" means a unix-style static library, (like libxyz.a)
> -#NETPBMLIBTYPE = unixstatic
> -# "dll" means a Windows DLL shared library
> -#NETPBMLIBTYPE = dll
> -# "dylib" means a Darwin/Mac OS shared library
> -#NETPBMLIBTYPE = dylib
> -
> -#NETPBMLIBSUFFIX is the suffix used on whatever kind of library is 
> -#selected above.  All this is used for is to construct library names.
> -#The make files never examine the actual value.
> -NETPBMLIBSUFFIX = so
> -
> -# "a" is the suffix for unix-style static libraries.  It is also
> -# traditionally used for shared libraries on AIX.  The Visual Age C
> -# manual says sometimes .so works on AIX, and GNU software for AIX
> -# 5.1.0 does indeed use it.  In our experiments, it works fine if you
> -# name the library file explicitly on the link, but isn't in the -l
> -# search order.  If you name the library explicitly on the link, the
> -# library must live in exactly the same position at run time, so we
> -# can't use that.  Therefore, you cannot build both static and shared
> -# libraries with AIX.  You have to choose.
> -#NETPBMLIBSUFFIX = a
> -# For HP-UX shared libraries:
> -#NETPBMLIBSUFFIX = sl
> -# Darwin/Mac OS shared library:
> -#NETPBMLIBSUFFIX = dylib
> -# Windows shared library:
> -#NETPBMLIBSUFFIX = dll
> -
> -#STATICLIB_TOO is "Y" to signify that you want a static library built
> -#and installed in addition to whatever library type you specified by
> -#NETPBMLIBTYPE.  If NETPBMLIBTYPE specified a static library,
> -#STATICLIB_TOO simply has no effect.
> -STATICLIB_TOO = Y
> -#STATICLIB_TOO = N
> -
> -#STATICLIBSUFFIX is the suffix that static libraries have.  It's
> -#meaningless if you aren't building static libraries.
> -STATICLIBSUFFIX = a
> -
> -#SHLIBPREFIXLIST is a blank-delimited list of prefixes that a filename
> -#of a shared library may have on this system.  Traditionally, it's
> -#just "lib", as in libc or libnetpbm.  On Windows, though, varying
> -#prefixes are used when multiple alternative forms of a library are
> -#available.  The first prefix in this list is what we use to name the
> -#Netpbm shared libraries.
> -#
> -# This variable controls how 'libopt' gets built.
> -#
> -SHLIBPREFIXLIST = lib
> -#Cygwin:
> -#SHLIBPREFIXLIST = cyg lib
> -
> -NETPBMSHLIBPREFIX = $(firstword $(SHLIBPREFIXLIST))
> -
> -#DLLVER is used to version the DLLs built on cygwin or other
> -#windowsish platforms.  We can't add this to LIBROOT, or we'd
> -#version the static libs (which is bad).  We can't add this
> -#at the end of the name (like unix does with so numbers) because
> -#windows will only load dlls whose name ends in "dll".  So,
> -#we have this variable, which becomes the end of the library "root" name
> -#for DLLs only.
> -#
> -# This variable controls how 'libopt' gets built.
> -#
> -DLLVER =
> -#Cygwin
> -#DLLVER = $(NETPBM_MAJOR_RELEASE)
> -
> -#NETPBM_DOCURL is the URL of the main documentation page for Netpbm.
> -#This is a directory which contains a file for each Netpbm program,
> -#library, and file type.  E.g. The documentation for jpegtopnm might be in
> -#http://netpbm.sourceforge.net/doc/jpegtopnm.html .  This value gets
> -#installed in the man pages (which say no more than to read the webpage)
> -#and in the Manweb netpbm.url file.
> -NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/
> -#For a system with no web access, but a local copy of the doc:
> -#NETPBM_DOCURL = file:/usr/doc/netpbm/
> -
> -# RGB_DB_PATH is where Netpbm looks for the color database when the RGBDEF
> -# environment variable is not set.  See pm_config_in.h for details.
> -RGB_DB_PATH = /usr/share/netpbm/rgb.txt:/usr/lib/X11/rgb.txt:/usr/share/X11/rgb.txt:/usr/X11R6/lib/X11/rgb.txt
> -
> -
> -
> -
> -####Lines above were copied from config.mk.in by 'configure'.
> -####Lines below were added by 'configure' based on the GNU platform.
> -DEFAULT_TARGET = nonmerge
> -NETPBMLIBTYPE=unixshared
> -NETPBMLIBSUFFIX=so
> -STATICLIB_TOO=N
> -CFLAGS = -O3 -ffast-math  -pedantic -fno-common -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit -Wwrite-strings -Wmissing-prototypes -Wundef -Wno-unknown-pragmas
> -CFLAGS_MERGE = -Wno-missing-declarations -Wno-missing-prototypes
> -LDRELOC = ld --reloc
> -LINKER_CAN_DO_EXPLICIT_LIBRARY=Y
> -LINKERISCOMPILER = Y
> -CFLAGS_SHLIB += -fPIC
> -TIFFLIB = libtiff.so
> -JPEGLIB = libjpeg.so
> -ZLIB = libz.so
> -NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/
> -- 
> 2.47.0
>
  

Patch

diff --git a/config/netpbm/config.mk b/config/netpbm/config.mk
deleted file mode 100644
index 0cb85db6e..000000000
--- a/config/netpbm/config.mk
+++ /dev/null
@@ -1,690 +0,0 @@ 
-####This file was automatically created by 'configure.'
-####Many variables are set twice -- a generic setting, then 
-####a system-specific override at the bottom of the file.
-####
-# This is a make file inclusion, to be included in all the Netpbm make
-# files.
-
-# This file is meant to contain variable settings that customize the
-# build for a particular target system configuration.
-
-# The distribution contains the file config.mk.in.  You edit
-# config.mk.in in ways relevant to your particular environment 
-# to create config.mk.  The "configure" program will do this
-# for you in simple cases.
-
-# Some of the variables that the including make file must set for this
-# file to work:
-#
-#  SRCDIR: The directory at the top of the Netpbm source tree.  Note that
-#  this is typically a relative directory, and it must be relative to the
-#  make file that includes this file.
-
-DEFAULT_TARGET = nonmerge
-#DEFAULT_TARGET = merge
-
-# Fiasco has some special requirements that make it fail to compile on
-# some systems, and since it isn't very important, just set this to "N"
-# and skip it on those systems unless you want to debug it and fix it.
-# OpenBSD:
-#BUILD_FIASCO = N
-BUILD_FIASCO = Y
-
-# The following are commands for the build process to use.  These values
-# do not get built into anything.
-
-# The C compiler (including macro preprocessor)
-#CC = gcc
-# Note that 'cc' is usually an alias for whatever is the main compiler
-# on a system, e.g. the GNU Compiler on Linux.
-CC = cc
-
-# The linker.
-LD = $(CC)
-#LD = ld
-#Tru64:
-#LD = cc
-#LD = gcc 
-
-#If the linker identified above is a compiler that invokes a linker
-#(as in 'cc foo.o -o foo'), set LINKERISCOMPILER.  The main difference is
-#that we expect a compiler to take linker options in the '-Wl,-opt1,val1'
-#syntax whereas the actual linker would take '-opt1 val1'.
-LINKERISCOMPILER=Y
-#If $(LD) is 'ld':
-#LINKERISCOMPILER=N
-
-#LINKER_CAN_DO_EXPLICIT_LIBRARY means the linker specified above can
-#take a library as just another link object argument, as in 'ld
-#pnmtojpeg.o /usr/local/lib/libjpeg.so ...'  as opposed to requiring a
-#-l option as in 'ld pnmtojpeg.o -L/usr/local/lib -l jpeg'.
-#This variable controls how 'libopt' gets built.  Note that with some
-#linkers, you can specify a shared library explicitly, but then it has
-#to live in that exact place at run time.  That's not good enough for us.
-
-LINKER_CAN_DO_EXPLICIT_LIBRARY=N
-#GNU:
-#LINKER_CAN_DO_EXPLICIT_LIBRARY=Y
-
-# This is the name of the header file that declares the types
-# uint32_t, etc.  This name is used as #include $(INTTYPES_H)  .
-# Set to null if the types come automatically without including anything.
-
-# We have a report (2005.09.17) that on IRIX 5.3 with the native IDO
-# cc, inttypes.h and sys/types.h conflict (and Netpbm programs include
-# sys/types for other things), so for that environment, <inttypes.h>
-# won't work, but "inttypes_netpbm.h" might.
-
-INTTYPES_H = <inttypes.h>
-# Linux libc5:
-#INTTYPES_H = <types.h>
-# Solaris:
-# Solaris has <sys/inttypes.h>, but it doesn't define int_fast2_t, etc.
-#INTTYPES_H = "inttypes_netpbm.h"
-# Others:
-#INTTYPES_H = <sys/stdint.h>
-#INTTYPES_H = <sys/types.h>
-# The automatically generated Netpbm version:
-#INTTYPES_H = "inttypes_netpbm.h"
-
-# HAVE_INT64 tells whether, assuming you include the header indicated by
-# INTTYPES_H, you have the int64_t type and related stuff.  (If you don't
-# the build will omit certain code that does 64 bit computations).
-HAVE_INT64 = Y
-#HAVE_INT64 = N
-
-# WANT_SSE tells whether the build should use SSE instructions, via the the
-# standard SSE intrinsics (operators such as '_mm_movemask_epi8').  SSE
-# instructions are faster than traditional instructions, but aren't available
-# on all CPUs.  Also, the standard intrinsics are not available in all
-# compilers.  Even if you say N here, Netpbm may still be built with some
-# SSE exploitation (e.g. SSE floating point) because the compiler will 
-# do it automatically.  You can add a -nomsse or -nomsse2 option to
-# CFLAGS or CFLAGS_PERSONAL to stop that.
-WANT_SSE = N
-#WANT_SSE = Y
-
-# CC and LD are for building the Netpbm programs, which are not necessarily
-# intended to run on the same system on which Make is running.  But when we 
-# build a build tool such as Libopt, it is meant to run only on the same 
-# system on which the Make is running.  The variables below define programs
-# to use to compile and link build tools.
-CC_FOR_BUILD = $(CC)
-LD_FOR_BUILD = $(LD)
-CFLAGS_FOR_BUILD = $(CFLAGS_CONFIG)
-LDFLAGS_FOR_BUILD = $(LDFLAGS)
-
-# WINDRES is the program that creates a linkable object file from 
-# a Windows Icon (.ico) file.
-WINDRES = windres
-
-# MAKE is set automatically by Make to what was used to invoke Make.
-
-INSTALL = $(SRCDIR)/buildtools/install.sh
-#Solaris:
-#INSTALL = /usr/ucb/install
-#Tru64:
-#INSTALL = installbsd
-#OSF1:
-#INSTALL = $(SRCDIR)/buildtools/installosf
-#Red Hat Linux:
-#INSTALL = install
-
-# STRIPFLAG is the option you pass to the above install program to make it
-# strip unnecessary information out of binaries.
-STRIPFLAG = -s
-# If you don't want to strip the binaries, just leave it null:
-#STRIPFLAG = 
-
-SYMLINK = ln -s
-# At least some Windows environments don't have any concept of symbolic
-# links, but direct copies are usually a passable alternative.
-#SYMLINK = cp
-
-#MANPAGE_FORMAT is "nroff" or "cat".  It determines in what format the
-#pointer man pages are installed (ready to nroff, or ready to cat).  
-#A pointer man pages is just a single-paragraph pages that tells you there is
-#no man page for the program, to look at the HTML documentation instead.
-MANPAGE_FORMAT = nroff
-#MANPAGE_FORMAT = cat
-
-AR = ar
-RANLIB = ranlib
-# IRIX, SCO don't have Ranlib:
-#RANLIB = true
-
-# LEX is the beginning of a shell command that runs a Lex-like
-# pattern matcher generator.  Null string means there isn't any such
-# command.  That means the build will skip parts that need one.
-
-LEX = flex
-# Solaris:
-# LEX = flex -e
-# Windows Mingw:
-# LEX =
-# 
-# LEX = lex
-
-# C compiler options 
-
-# gcc:
-# -ansi and -Werror should work too, but are not included
-# by default because there's no point in daring the build to fail.
-# -pedantic isn't a problem because it causes at worst a warning.
-#CFLAGS = -O3 -ffast-math -pedantic -fno-common \
-#          -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit \
-#          -Wwrite-strings -Wmissing-prototypes -Wundef -Wno-unknown-pragmas
-# The merged programs have a main_XXX subroutine instead of main(),
-# which would cause a warning with -Wmissing-declarations or 
-# -Wmissing-prototypes.
-#CFLAGS_MERGE = -Wno-missing-declarations -Wno-missing-prototypes
-# A user of DEC Tru64 4.0F in May 2000 needed -DLONG_32 for ppmtompeg,
-# but word size-sensitive code was removed from parallel.c in September 2004.
-# A user of Tru64 5.1A in July 2003 needed NOT to have -DLONG_32.  In
-# theory, you need this if on your system, long is 32 bits and int is not.
-# But it may be completely irrelevant today.
-#Tru64:
-#CFLAGS = -O2 -std1 -DLONG_32
-#CFLAGS = -O2 -std1
-#AIX:
-#CFLAGS= -O3
-#HP-UX:
-#CFLAGS= -O3 -fPIC
-#IRIX:
-#CFLAGS= -n32 -O3
-#Amiga with GNU compiler:
-#CFLAGS= -m68020-60 -ffast-math -mstackextend 
-# You can add -noixemul for Amiga and successfully compile most of the 
-# programs.  (Of the remaining ones, if you can supply your own strtod() 
-# function, most of them will build with -noixemul).  So try building 
-# with 'make --keep-going CADD=-noixemul' first, then just 'make' to build
-# everything that failed for lack of the ixemul library in the first step.
-# That way, the parts that don't required the ixemul library won't indicate
-# a dependency on it.
-#OpenBSD:
-#CFLAGS = -I/usr/local/include
-
-# EXE is a suffix that the linker puts on any executable it generates.
-# In cygwin, this is .exe and most programs deal with its existence without
-# us having to know about it.  Some don't though, so set this:
-
-EXE =
-#Cygwin, DJGPP/Windows:
-#EXE = .exe
-  
-# linker options.  
-
-# LDFLAGS is often set as an environment variable;  A setting here overrides
-# it.  So either make sure you want to override it, or do a "LDFLAGS +=" here.
-
-# LDFLAGS is usually not the right place for a -L option, because we put
-# LDFLAGS _before_ our own -L options, so it would cancel out our
-# specific selection of libraries.  For example, if you say
-# LDFLAGS=/usr/local/lib and an old copy of the libnetpbm is in
-# /usr/local/lib, then you'd be linking against that old copy instead of
-# the copy you just built, which is located by a -L option later on the
-# link command.  LIBS is the right variable for adding -L options.  LIBS
-# goes after any of our make files' own -L options.
-
-# Eunice users may want to use -noshare so that the executables can
-# run standalone:
-#LDFLAGS += -noshare
-#Tru64:
-# Russ Allberry says on 2001.06.09 that -oldstyle_liblookup may be necessary
-# to keep from finding an ancient system libjpeg.so that isn't compatible with
-# NetPBM.  Michael Long found that /usr/local/lib is not in the default
-# search path, or not soon enough, and he was getting an old libjpeg that
-# caused all the jpeg symbol references to be unresolved.  He had installed
-# a new libjpeg in /usr/local/lib.
-#LDFLAGS += -call_shared -oldstyle_liblookup -L/usr/local/lib
-#AIX:
-#LDFLAGS += -L /usr/pubsw/lib
-#HP-UX:
-#LDFLAGS += -Wl,+b,/usr/pubsw/lib
-#IRIX:
-#LDFLAGS += -n32
-
-# Linker options for created Netpbm shared libraries.
-
-# Here, $(SONAME) resolves to the soname for the shared library being created.
-# The following are gcc options.  This works on GNU libc systems.
-LDSHLIB = -shared -Wl,-soname,$(SONAME)
-# You need -nostart instead of -shared on BeOS.  Though the BeOS compiler is
-# ostensibly gcc, it has the -nostart option, which is not mentioned in gcc
-# documentation and doesn't exist in at least one non-BeOS installation.
-# BeOS doesn't have sonames built in.
-#LDSHLIB = -nostart
-#LDSHLIB = -G
-# Solaris, SunOS with GNU Ld, SCO:
-# These systems have no soname option.
-#LDSHLIB = -shared
-# Solaris with Sun Ld:
-#LDSHLIB = -Wl,-Bdynamic,-G,-h,$(SONAME) 
-#Tru64:
-#LDSHLIB = -shared -expect_unresolved "*"
-#IRIX:
-#LDSHLIB = -shared -n32
-#AIX GNU compiler/linker:
-#LDSHLIB = -shared
-#AIX Visual Age C:
-#LDSHLIB = -qmkshrobj
-#Mac OSX:
-# According to experiments done by Peter A Crowley in May 2007, if
-# libnetpbm goes in a standard place such as /usr/local/lib,
-# programs need not be built with libnetpbm's location included.
-# But if it goes elsewhere, the link-editor must include the
-# location in the executable.  It finds the runtime location by
-# looking inside the library.  The information in the library
-# comes from the install_name option with which the library was
-# built.  It's an alternative to the -rpath option on other systems.
-#LDSHLIB=-dynamiclib
-#LDSHLIB=-dynamiclib -install_name $(NETPBMLIB_RUNTIME_PATH)/libnetpbm.$(MAJ).dylib
-
-# LDRELOC is the command to combine two .o files (relocateable object files)
-# into a single .o file that can later be linked into something else.  NONE
-# means no such command is available.
-
-LDRELOC = NONE
-# GNU Ld:
-# Older GNU Ld misspells the option as --relocateable.  Newer GNU Ld
-# correctly spells it --relocatable.  The abbreviation --reloc works on
-# both.
-#LDRELOC = ld --reloc
-#LDRELOC = ld -r
-
-
-# On older systems, you have to make shared libraries out of position
-# independent code, so you need -fpic or fPIC here.  (The rule is: if
-# -fpic works, use it.  If it bombs, go to fPIC).  On newer systems,
-# it isn't necessary, but can save real memory at the expense of
-# execution speed.  Without position independent code, the library
-# loader may have to patch addresses into the executable text.  On an
-# older system, this would cause a program crash because the loader
-# would be writing into read-only shared memory.  But on newer
-# systems, the system silently creates a private mapping of the page
-# or segment being modified (the "copy on write" phenomenon).  So it
-# needs its own private real page frame.  In one experiment, A second
-# copy of Pbmtext used 16K less real memory when built with -fpic than
-# when built without.  2001.06.02.
-
-# We have seen -fPIC required on IA64 and AMD64 machines (GNU
-# compiler/linker).  Build-time linking fails without it.  I don't
-# know why -- history seems to be repeating itself.  2005.02.23.
-
-CFLAGS_SHLIB = 
-# Gcc:
-#CFLAGS_SHLIB = -fpic
-#CFLAGS_SHLIB = -fPIC
-# Sun compiler:
-#CFLAGS_SHLIB = -Kpic
-#CFLAGS_SHLIB = -KPIC
-
-# SHLIB_CLIB is the link option to include the C library in a shared library,
-# normally "-lc".  On typical systems, this serves no purpose.  On some,
-# though, it causes information about which C library to use to be recorded
-# in the shared library and thus choose the correct library among several or
-# avoid using an incompatible one.  But on some systems, the link fails.
-# On 2002.09.30, "John H. DuBois III" <spcecdt@armory.com> reports that on 
-# SCO OpenServer, he gets the following error message with -lc:
-#
-#  -lc; relocations referenced  ;  from file(s) /usr/ccs/lib/libc.so(random.o);
-#   fatal error: relocations remain against allocatable but non-writable 
-#   section: ; .text
-
-SHLIB_CLIB = -lc
-# SCO:
-#SHLIB_CLIB =
-
-# On some systems you have to build into an executable the list of
-# directories where its dynamically linked libraries can be found at
-# run time.  This is typically done with a -R or -rpath linker
-# option.  Even on systems that don't require it, you might prefer to do
-# that rather than set up environment variables or configuration files
-# to tell the system where the libraries are.  A "Y" here means to put
-# the directory information in the executable at link time.
-
-NEED_RUNTIME_PATH = N
-# Solaris, SunOS, NetBSD, AIX:
-#NEED_RUNTIME_PATH = Y
-
-# RPATHOPTNAME is the option you use on the link command to specify
-# a runtime search path for a shared library.  It is meaningless unless
-# NEED_RUNTIME_PATH is Y.
-RPATHOPTNAME = -rpath
-
-# The following variables tell where your various libraries on which
-# Netpbm depends live.  The LIBxxx variable is a full file
-# specification of the link library (not necessarily the library used
-# at run time).  e.g. "/usr/local/lib/graphics/libjpeg.so".  It usually
-# doesn't matter if the library prefix and suffix are right -- you can
-# use "lib" and ".so" or ".a" regardless of what your system actually
-# uses because these just turn into "-L" and "-l" linker options
-# anyway.  ".a" implies a static library for some purposes, though.
-# If you don't have the library in question, use a value of NONE for
-# LIBxxx and the build will simply skip the programs that require that
-# library.  If the library is in your linker's (or the Netpbm build's)
-# default search path, leave off the directory part, e.g. "libjpeg.so".
-
-# The xxxHDR_DIR variable is the directory in which the interface
-# headers for the library live (e.g. /usr/include).  If they are in your
-# compiler's default search path, set this variable to null.
-
-# This is where the Netpbm shared libraries will reside when Netpbm is
-# fully installed.  In some configurations, the Netpbm builder builds
-# this information into the Netpbm executables.  This does NOT affect
-# where the Netpbm installer installs the libraries.  A null value
-# means the libraries are in a default search path used by the runtime
-# library loader.
-NETPBMLIB_RUNTIME_PATH = 
-#NETPBMLIB_RUNTIME_PATH = /usr/lib/netpbm
-
-# The TIFF library.  See above.  If you want to build the tiff
-# converters, you must have the tiff library already installed.
-
-TIFFLIB = NONE
-TIFFHDR_DIR =
-
-#TIFFLIB = libtiff.so
-#TIFFHDR_DIR = /usr/include/libtiff
-#NetBSD:
-#TIFFLIB = $(LOCALBASE)/lib/libtiff.so
-#TIFFHDR_DIR = $(LOCALBASE)/include
-# OSF, Tru64:
-#TIFFLIB = /usr/local1/DEC/lib/libtiff.so
-#TIFFHDR_DIR = /usr/local1/DEC/include
-
-# Some TIFF libraries do Jpeg and/or Z (flate) compression and thus any
-# program linked with the TIFF library needs a Jpeg and/or Z library.  Some
-# TIFF libraries have such library statically linked in, but others need it to
-# be linked with the program at link-edit time or dynamically at program load
-# time.  Make this 'N' if your TIFF library doesn't need such linking.  As of
-# 2005.01, the most usual build of the TIFF library appears to require both.
-TIFFLIB_NEEDS_JPEG = Y
-TIFFLIB_NEEDS_Z = Y
-
-# The JPEG library.  See above.  If you want to build the jpeg
-# converters you must have the jpeg library already installed.
-
-# Tiff files can use JPEG compression, so the Tiff library can reference
-# the JPEG library.  If your Tiff library references a dynamic JPEG 
-# library, you must specify at least JPEGLIB here, or the Tiff
-# converters will not build.  Note that your Tiff library may have the
-# JPEG stuff statically linked in, in which case you won't need 
-# JPEGLIB in order to build the Tiff converters.
-
-JPEGLIB = NONE
-JPEGHDR_DIR =
-#JPEGLIB = libjpeg.so
-#JPEGHDR_DIR = /usr/include/jpeg
-# Netbsd:
-#JPEGLIB = ${LOCALBASE}/lib/libjpeg.so
-#JPEGHDR_DIR = ${LOCALBASE}/include
-# OSF, Tru64:
-#JPEGLIB = /usr/local1/DEC/libjpeg.so
-#JPEGHDR_DIR = /usr/local1/DEC/include
-# Typical:
-#JPEGLIB = /usr/local/lib/libjpeg.so
-#JPEGHDR_DIR = /usr/local/include
-# Don't build JPEG stuff:
-#JPEGLIB = NONE
-
-
-# The PNG library.  See above.  If you want to build the PNG
-# converters you must have the PNG library already installed.
-
-# The PNG library, by convention starting around April 2002, gets installed
-# with names that include a version number, such as libpng10.a and header
-# files in /usr/include/libpng10.  But there is conventionally an unnumbered
-# alias (e.g. libpng.a, /usr/include/libpng) for the preferred version.
-#
-# Recent versions of the library (since some time in the 2002-2006 period)
-# have an associated 'libpng-config' that tells how to link it.  The make
-# files will use that program if it exists (must be in the PATH).  In that
-# case, PNGLIB and PNGHDR_DIR are irrelevant, but PNGVER is still meaningful,
-# because the make file runs 'libpng$(PNGVER)-config'.
-#
-# Even more recent versions have the more modern Pkgconfig database entry
-# to tell how to link it.  The make files will try to use that first.
-#
-# The normal way to choose the libpng the Netpbm build uses from among multiple
-# versions on your system is not to mess with the variables below, but rather
-# to mess with PKG_CONFIG_PATH or PATH environment variable so that the version
-# you want to use appears first in the search path.
-
-PNGLIB = NONE
-PNGHDR_DIR =
-PNGVER = 
-#PNGLIB = libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/include/libpng$(PNGVER)
-# NetBSD:
-#PNGLIB = $(LOCALBASE)/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = $(LOCALBASE)/include
-# OSF/Tru64:
-#PNGLIB = /usr/local1/DEC/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/local1/DEC/include
-
-# The zlib compression library.  See above.  You need it to build
-# anything that needs the PNG library (see above).  If you selected
-# NONE for the PNG library, it doesn't matter what you specify here --
-# it won't get used.
-#
-# If you have 'libpng-config' (see above), these are irrelevant.
-
-ZLIB = NONE
-ZHDR_DIR = 
-#ZLIB = libz.so
-
-# The JBIG lossless image compression library (aka JBIG-KIT):
-
-JBIGLIB = $(INTERNAL_JBIGLIB)
-JBIGHDR_DIR = $(INTERNAL_JBIGHDR_DIR)
-
-# The Jasper JPEG-2000 image compression library (aka JasPer):
-JASPERLIB = $(INTERNAL_JASPERLIB)
-JASPERHDR_DIR = $(INTERNAL_JASPERHDR_DIR)
-# JASPERDEPLIBS is the libraries (-l options or file names) on which
-# The Jasper library depends -- i.e. what you have to link into any
-# executable that links in the Jasper library.
-JASPERDEPLIBS =
-#JASPERDEPLIBS = -ljpeg
-
-# And the Utah Raster Toolkit (aka URT aka RLE) library:
-
-URTLIB = $(BUILDDIR)/urt/librle.a
-URTHDR_DIR = $(SRCDIR)/urt
-
-# The X11 library has facilities for talking to an X Window System
-# server.  It is required by Pamx.
-
-X11LIB = NONE
-X11HDR_DIR =
-
-#X11LIB = /usr/lib/libX11.so
-#X11HDR_DIR =
-
-# The Linux SVGA library (Svgalib) is a facility for displaying graphics
-# on the Linux console.  It is required by Ppmsvgalib.
-
-LINUXSVGALIB = NONE
-LINUXSVGAHDR_DIR = 
-
-#LINUXSVGALIB = /usr/lib/libvga.so
-#LINUXSVGAHDR_DIR = /usr/include/vgalib
-
-# WINICON_OBJECT is the object file to bind into all Netpbm executables
-# to provide the icon for Windows to use for it.  Null for none.
-WINICON_OBJECT =
-#WINICON_OBJECT = $(BUILDDIR)/icon/netpbm.o
-
-# If you don't want any network functions, set OMIT_NETWORK to "Y".
-# The only thing that requires network functions is the option in
-# ppmtompeg to run it on multiple computers simultaneously.  On some
-# systems network functions don't work or we haven't figured out how to 
-# make them work, or they just aren't worth the effort.  
-OMIT_NETWORK =
-#DJGPP/Windows, Tru64:
-#   (there's some minor header problem that prevents network functions from 
-#   building on Tru64 2000.10.06)
-#OMIT_NETWORK = Y
-
-# These are -l options to link in the network libraries.  Often, these are
-# built into the standard C library, so this can be null.  This is irrelevant
-# if OMIT_NETWORK is "Y".
-
-NETWORKLD = 
-# Solaris, SunOS:
-#NETWORKLD = -lsocket -lnsl
-# SCO:
-#NETWORKLD = -lsocket, -lresolv
-
-# DONT_HAVE_PROCESS_MGMT is Y if this system doesn't have the usual
-# Unix process management stuff - fork, wait, etc.  N for a regular Unix
-# system.
-DONT_HAVE_PROCESS_MGMT = N
-
-# The following variables are used only by 'make install' (and the
-# variants of it).  Paths here don't, for example, get built into any
-# programs.
-
-# This is where everything goes when you do 'make package', unless you
-# override it by setting 'pkgdir' on the Make command line.
-PKGDIR_DEFAULT = /tmp/netpbm
-
-# This is where test results are written when you do 'make check', unless
-# you override it by setting 'resultdir' on the Make command line.
-RESULTDIR_DEFAULT = /tmp/netpbm-test
-
-# Subdirectory of the package directory ($(pkgdir)) in which man pages
-# go.
-PKGMANDIR = share/man
-
-# File permissions for installed files.
-# Note that on some systems (e.g. Solaris), 'install' can't use the 
-# mnemonic permissions - you have to use octal.
-
-# binaries (pbmmake, etc)
-INSTALL_PERM_BIN =  755       # u=rwx,go=rx
-# shared libraries (libpbm.so, etc)
-INSTALL_PERM_LIBD = 755       # u=rwx,go=rx
-# static libraries (libpbm.a, etc)
-INSTALL_PERM_LIBS = 644       # u=rw,go=r
-# header files (pbm.h, etc)
-INSTALL_PERM_HDR =  644       # u=rw,go=r
-# man pages (pbmmake.1, etc)
-INSTALL_PERM_MAN =  644       # u=rw,go=r
-# data files (pnmtopalm color maps, etc)
-INSTALL_PERM_DATA = 644       # u=rw,go=r
-
-# Specify the suffix that want the man pages to have.
-
-SUFFIXMANUALS1 = 1
-SUFFIXMANUALS3 = 3
-SUFFIXMANUALS5 = 5
-
-#NETPBMLIBTYPE tells the kind of libraries that will get built to hold the
-#Netpbm library functions.  The value is used only in make file tests.
-# "unixshared" means a unix-style shared library, typically named like 
-# libxyz.so.2.3
-NETPBMLIBTYPE = unixshared
-# "unixstatic" means a unix-style static library, (like libxyz.a)
-#NETPBMLIBTYPE = unixstatic
-# "dll" means a Windows DLL shared library
-#NETPBMLIBTYPE = dll
-# "dylib" means a Darwin/Mac OS shared library
-#NETPBMLIBTYPE = dylib
-
-#NETPBMLIBSUFFIX is the suffix used on whatever kind of library is 
-#selected above.  All this is used for is to construct library names.
-#The make files never examine the actual value.
-NETPBMLIBSUFFIX = so
-
-# "a" is the suffix for unix-style static libraries.  It is also
-# traditionally used for shared libraries on AIX.  The Visual Age C
-# manual says sometimes .so works on AIX, and GNU software for AIX
-# 5.1.0 does indeed use it.  In our experiments, it works fine if you
-# name the library file explicitly on the link, but isn't in the -l
-# search order.  If you name the library explicitly on the link, the
-# library must live in exactly the same position at run time, so we
-# can't use that.  Therefore, you cannot build both static and shared
-# libraries with AIX.  You have to choose.
-#NETPBMLIBSUFFIX = a
-# For HP-UX shared libraries:
-#NETPBMLIBSUFFIX = sl
-# Darwin/Mac OS shared library:
-#NETPBMLIBSUFFIX = dylib
-# Windows shared library:
-#NETPBMLIBSUFFIX = dll
-
-#STATICLIB_TOO is "Y" to signify that you want a static library built
-#and installed in addition to whatever library type you specified by
-#NETPBMLIBTYPE.  If NETPBMLIBTYPE specified a static library,
-#STATICLIB_TOO simply has no effect.
-STATICLIB_TOO = Y
-#STATICLIB_TOO = N
-
-#STATICLIBSUFFIX is the suffix that static libraries have.  It's
-#meaningless if you aren't building static libraries.
-STATICLIBSUFFIX = a
-
-#SHLIBPREFIXLIST is a blank-delimited list of prefixes that a filename
-#of a shared library may have on this system.  Traditionally, it's
-#just "lib", as in libc or libnetpbm.  On Windows, though, varying
-#prefixes are used when multiple alternative forms of a library are
-#available.  The first prefix in this list is what we use to name the
-#Netpbm shared libraries.
-#
-# This variable controls how 'libopt' gets built.
-#
-SHLIBPREFIXLIST = lib
-#Cygwin:
-#SHLIBPREFIXLIST = cyg lib
-
-NETPBMSHLIBPREFIX = $(firstword $(SHLIBPREFIXLIST))
-
-#DLLVER is used to version the DLLs built on cygwin or other
-#windowsish platforms.  We can't add this to LIBROOT, or we'd
-#version the static libs (which is bad).  We can't add this
-#at the end of the name (like unix does with so numbers) because
-#windows will only load dlls whose name ends in "dll".  So,
-#we have this variable, which becomes the end of the library "root" name
-#for DLLs only.
-#
-# This variable controls how 'libopt' gets built.
-#
-DLLVER =
-#Cygwin
-#DLLVER = $(NETPBM_MAJOR_RELEASE)
-
-#NETPBM_DOCURL is the URL of the main documentation page for Netpbm.
-#This is a directory which contains a file for each Netpbm program,
-#library, and file type.  E.g. The documentation for jpegtopnm might be in
-#http://netpbm.sourceforge.net/doc/jpegtopnm.html .  This value gets
-#installed in the man pages (which say no more than to read the webpage)
-#and in the Manweb netpbm.url file.
-NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/
-#For a system with no web access, but a local copy of the doc:
-#NETPBM_DOCURL = file:/usr/doc/netpbm/
-
-# RGB_DB_PATH is where Netpbm looks for the color database when the RGBDEF
-# environment variable is not set.  See pm_config_in.h for details.
-RGB_DB_PATH = /usr/share/netpbm/rgb.txt:/usr/lib/X11/rgb.txt:/usr/share/X11/rgb.txt:/usr/X11R6/lib/X11/rgb.txt
-
-
-
-
-####Lines above were copied from config.mk.in by 'configure'.
-####Lines below were added by 'configure' based on the GNU platform.
-DEFAULT_TARGET = nonmerge
-NETPBMLIBTYPE=unixshared
-NETPBMLIBSUFFIX=so
-STATICLIB_TOO=N
-CFLAGS = -O3 -ffast-math  -pedantic -fno-common -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit -Wwrite-strings -Wmissing-prototypes -Wundef -Wno-unknown-pragmas
-CFLAGS_MERGE = -Wno-missing-declarations -Wno-missing-prototypes
-LDRELOC = ld --reloc
-LINKER_CAN_DO_EXPLICIT_LIBRARY=Y
-LINKERISCOMPILER = Y
-CFLAGS_SHLIB += -fPIC
-TIFFLIB = libtiff.so
-JPEGLIB = libjpeg.so
-ZLIB = libz.so
-NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/