clamav: Update to 1.3.0

  For details see:
https://blog.clamav.net/2023/11/clamav-130-122-105-released.html

Excerpts from changelog:

"Major changes

    Added support for extracting and scanning attachments found in
    Microsoft OneNote section files. OneNote parsing will be enabled by
    default, but may be optionally disabled using one of the following
    options:
    a. The clamscan command line option: --scan-onenote=no,
    b. The clamd.conf config option: ScanOneNote no,
    c. The libclamav scan option options.parse &= ~CL_SCAN_PARSE_ONENOTE;,
    d. A signature change to the daily.cfg dynamic configuration (DCONF).

Other improvements

    Fixed issue when building ClamAV on the Haiku (BeOS-like) operating
    system. Patch courtesy of Luca D'Amico

    ClamD: When starting, ClamD will now check if the directory specified
    by TemporaryDirectory in clamd.conf exists. If it doesn't, ClamD will
    print an error message and will exit with exit code 1. Patch courtesy
    of Andrew Kiggins.

    CMake: If configured to build static libraries, CMake will now also
    install the libclamav_rust, libclammspack, libclamunrar_iface, and
    libclamunrar static libraries required by libclamav.
    Note: These libraries are all linked into the clamscan, clamd, sigtool,
    and freshclam programs, which is why they did not need to be installed
    to function. However, these libraries would be required if you wish to
    build some other program that uses the libclamav static library.
    Added file type recognition for compiled Python (`.pyc`) files.

      The file type appears as a string parameter for these callback
      functions:

      - clcb_pre_cache
      - clcb_pre_scan
      - clcb_file_inspection

      When scanning a `.pyc` file, the `type` parameter will now show

      "CL_TYPE_PYTHON_COMPILED" instead of "CL_TYPE_BINARY_DATA".

    Improved support for decrypting PDFs with empty passwords.

    Assorted minor improvements and typo fixes.

Bug fixes

    Fixed a warning when scanning some HTML files.

    Fixed an issue decrypting some PDF's with an empty password.

    ClamOnAcc: Fixed an infinite loop when a watched directory does not
    exist.

    ClamOnAcc: Fixed an infinite loop when a file has been deleted before a
    scan.
    Patch courtesy of gsuehiro.

    Fixed a possible crash when processing VBA files on HP-UX/IA 64bit.
    Patch courtesy of Albert Chin-A-Young.

    ClamConf: Fixed an issue printing `MaxScanSize` introduced with the
    change to allow a `MaxScanSize` greater than 4 GB.
    Fix courtesy of teoberi.

    Fixed an issue building a ClamAV RPM in some configurations.
    The issue was caused by faulty CMake logic that intended to create an
    empty database directory during the installation."

Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
---
 config/rootfiles/packages/clamav | 9 ++++++---
 lfs/clamav                       | 8 ++++----
 2 files changed, 10 insertions(+), 7 deletions(-)
  

Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>

On 09/02/2024 13:09, Matthias Fischer wrote:
> For details see:
> https://blog.clamav.net/2023/11/clamav-130-122-105-released.html
>
> Excerpts from changelog:
>
> "Major changes
>
>      Added support for extracting and scanning attachments found in
>      Microsoft OneNote section files. OneNote parsing will be enabled by
>      default, but may be optionally disabled using one of the following
>      options:
>      a. The clamscan command line option: --scan-onenote=no,
>      b. The clamd.conf config option: ScanOneNote no,
>      c. The libclamav scan option options.parse &= ~CL_SCAN_PARSE_ONENOTE;,
>      d. A signature change to the daily.cfg dynamic configuration (DCONF).
>
> Other improvements
>
>      Fixed issue when building ClamAV on the Haiku (BeOS-like) operating
>      system. Patch courtesy of Luca D'Amico
>
>      ClamD: When starting, ClamD will now check if the directory specified
>      by TemporaryDirectory in clamd.conf exists. If it doesn't, ClamD will
>      print an error message and will exit with exit code 1. Patch courtesy
>      of Andrew Kiggins.
>
>      CMake: If configured to build static libraries, CMake will now also
>      install the libclamav_rust, libclammspack, libclamunrar_iface, and
>      libclamunrar static libraries required by libclamav.
>      Note: These libraries are all linked into the clamscan, clamd, sigtool,
>      and freshclam programs, which is why they did not need to be installed
>      to function. However, these libraries would be required if you wish to
>      build some other program that uses the libclamav static library.
>      Added file type recognition for compiled Python (`.pyc`) files.
>
>        The file type appears as a string parameter for these callback
>        functions:
>
>        - clcb_pre_cache
>        - clcb_pre_scan
>        - clcb_file_inspection
>
>        When scanning a `.pyc` file, the `type` parameter will now show
>
>        "CL_TYPE_PYTHON_COMPILED" instead of "CL_TYPE_BINARY_DATA".
>
>      Improved support for decrypting PDFs with empty passwords.
>
>      Assorted minor improvements and typo fixes.
>
> Bug fixes
>
>      Fixed a warning when scanning some HTML files.
>
>      Fixed an issue decrypting some PDF's with an empty password.
>
>      ClamOnAcc: Fixed an infinite loop when a watched directory does not
>      exist.
>
>      ClamOnAcc: Fixed an infinite loop when a file has been deleted before a
>      scan.
>      Patch courtesy of gsuehiro.
>
>      Fixed a possible crash when processing VBA files on HP-UX/IA 64bit.
>      Patch courtesy of Albert Chin-A-Young.
>
>      ClamConf: Fixed an issue printing `MaxScanSize` introduced with the
>      change to allow a `MaxScanSize` greater than 4 GB.
>      Fix courtesy of teoberi.
>
>      Fixed an issue building a ClamAV RPM in some configurations.
>      The issue was caused by faulty CMake logic that intended to create an
>      empty database directory during the installation."
>
> Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
> ---
>   config/rootfiles/packages/clamav | 9 ++++++---
>   lfs/clamav                       | 8 ++++----
>   2 files changed, 10 insertions(+), 7 deletions(-)
>
> diff --git a/config/rootfiles/packages/clamav b/config/rootfiles/packages/clamav
> index 428f73e6c..2c7242d7e 100644
> --- a/config/rootfiles/packages/clamav
> +++ b/config/rootfiles/packages/clamav
> @@ -14,16 +14,17 @@ usr/bin/sigtool
>   #usr/include/libfreshclam.h
>   usr/lib/libclamav.so
>   usr/lib/libclamav.so.12
> -usr/lib/libclamav.so.12.0.1
> +usr/lib/libclamav.so.12.0.2
> +#usr/lib/libclamav_rust.a
>   usr/lib/libclammspack.so
>   usr/lib/libclammspack.so.0
>   usr/lib/libclammspack.so.0.8.0
>   usr/lib/libclamunrar.so
>   usr/lib/libclamunrar.so.12
> -usr/lib/libclamunrar.so.12.0.1
> +usr/lib/libclamunrar.so.12.0.2
>   usr/lib/libclamunrar_iface.so
>   usr/lib/libclamunrar_iface.so.12
> -usr/lib/libclamunrar_iface.so.12.0.1
> +usr/lib/libclamunrar_iface.so.12.0.2
>   usr/lib/libfreshclam.so
>   usr/lib/libfreshclam.so.3
>   usr/lib/libfreshclam.so.3.0.1
> @@ -98,6 +99,7 @@ usr/sbin/clamd
>   #usr/share/doc/ClamAV/html/fonts/open-sans-v17-all-charsets-italic.woff2
>   #usr/share/doc/ClamAV/html/fonts/open-sans-v17-all-charsets-regular.woff2
>   #usr/share/doc/ClamAV/html/fonts/source-code-pro-v11-all-charsets-500.woff2
> +#usr/share/doc/ClamAV/html/googled62299e9391332c4.html
>   #usr/share/doc/ClamAV/html/highlight.css
>   #usr/share/doc/ClamAV/html/highlight.js
>   #usr/share/doc/ClamAV/html/images
> @@ -167,6 +169,7 @@ usr/sbin/clamd
>   #usr/share/doc/ClamAV/html/searcher.js
>   #usr/share/doc/ClamAV/html/searchindex.js
>   #usr/share/doc/ClamAV/html/searchindex.json
> +#usr/share/doc/ClamAV/html/sitemap.xml
>   #usr/share/doc/ClamAV/html/theme-dawn.js
>   #usr/share/doc/ClamAV/html/theme-tomorrow_night.js
>   #usr/share/doc/ClamAV/html/tomorrow-night.css
> diff --git a/lfs/clamav b/lfs/clamav
> index b64753c44..5a1089187 100644
> --- a/lfs/clamav
> +++ b/lfs/clamav
> @@ -1,7 +1,7 @@
>   ###############################################################################
>   #                                                                             #
>   # IPFire.org - A linux based firewall                                         #
> -# Copyright (C) 2007-2023  IPFire Team  <info@ipfire.org>                     #
> +# Copyright (C) 2007-2024  IPFire Team  <info@ipfire.org>                     #
>   #                                                                             #
>   # This program is free software: you can redistribute it and/or modify        #
>   # it under the terms of the GNU General Public License as published by        #
> @@ -26,7 +26,7 @@ include Config
>   
>   SUMMARY    = Antivirus Toolkit
>   
> -VER        = 1.2.1
> +VER        = 1.3.0
>   
>   THISAPP    = clamav-$(VER)
>   DL_FILE    = $(THISAPP).tar.gz
> @@ -34,7 +34,7 @@ DL_FROM    = $(URL_IPFIRE)
>   DIR_APP    = $(DIR_SRC)/$(THISAPP)
>   TARGET     = $(DIR_INFO)/$(THISAPP)
>   PROG       = clamav
> -PAK_VER    = 70
> +PAK_VER    = 71
>   
>   DEPS       =
>   
> @@ -50,7 +50,7 @@ objects = $(DL_FILE)
>   
>   $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>   
> -$(DL_FILE)_BLAKE2 = 1373c6882b165e769dcc3c3631dfe7183231b2fe4830608b57d919af1a8e9a5a73aa3cc4767981a27bb9845390165b5241750904d50e1a90b7237200b97f7ef3
> +$(DL_FILE)_BLAKE2 = dc411b1a905d2699c497870877fbe99e3910f8e29bc77830085c8ab75161c80066ca1396f47c3cd6a098c06c839464dbe31feb2e7e64622c657ad4a6a9401282
>   
>   
>   install : $(TARGET)