e2fsprogs: Update to version 1.47.0

Message ID 20230302101419.3443689-3-adolf.belka@ipfire.org
State Accepted
Commit 1f3f26702144ef600eb7937c4ab78e4833e6636f
Headers
Series e2fsprogs: Update to version 1.47.0 |

Commit Message

Adolf Belka March 2, 2023, 10:14 a.m. UTC
  - Update from version 1.46.5 to 1.47.0
- Update of rootfile not required
- Changelog
E2fsprogs 1.47.0 (February 5, 2023)
Updates/Fixes since v1.46.6:
UI and Features
	Add support for the orphan_file feature, which speeds up workloads that
	are deleting or truncating a large number files in parallel.  This
	compat feature was first supported in the v5.15 Linux kernel.
	The mke2fs program (via the mke2fs.conf file) now enables the
	metadata_csum_seed and orphan_file features by default.  The
	metadata_csum_seed feature is an incompat feature which is first
	supported in the Linux kernel starting in the 4.4 kernel and e2fsprogs
	1.43.
	Mke2fs now supports the extended option "assume_storage_prezeroed" which
	causes mke2fs to skip zeroing the journal and inode tables and to mark
	the inode tables as zeroed.
	Add support to tune2fs and e2label to set the label and UUID for a
	mounted file system using a ioctl, which is more reliable than modifying
	the superblock via writing to the block device.  The kernel support for
	setting the label landed in v5.17, while the support for adding the UUID
	landed in v6.0.  If the ioctls are not supported, tune2fs and e2label
	will fall back old strategy of directly modifying the superblock.
	Allow tune2fs to disable the casefold feature after scanning all of the
	directories do not have the Casefold flag set.
Fixes
	Fix a potential unbalanced mutex unlock when there is a short read while
	using the bounce buffer when using direct I/O.
Performance, Internal Implementation, Development Support etc.
	Fix various Coverity and compiler warnings.
	Add the new function ext2fs_xattrs_read_inode() which takes an in-memory
	inode to avoid needing to reread an inode that was already read into
	memory.
	Teach debugfs logdump command the -n option which forces printing a
	specified number of transactions, even when a block missing a magic
	number would have stopped the logdump.  (This is for debugging
	journalling problems.)
E2fsprogs 1.46.6 (February 1, 2023)
Updates/Fixes since v1.46.5:
UI and Features
	Debugfs's ncheck command now allows the inode number to be surrounded by
	angle brackets, to be consistent with other debugfs commands.
	Debugfs no longer prints a scary message when debugfs -c (which enables
	"catastrophic mode") is used.  This was intended to allow debugfs to
	operate on very badly corrupted file systems, but it is now sometimes
	used to suppress reading the block and inode bitmaps when they are not
	needed.
	Resize2fs will round down the requested new file system size to the
	nearest cluster boundary when resizing bigalloc file systems.
	Improve error messages issued by badblocks.
	Fuse2fs now supports an offset=<bytes> option which allows operating on
	a file system image which is located starting at the specified offset
	from the beginning of the image.
Fixes
	Pre-v6.2 Linux kernels had long-standing bug in how the extended
	attribute hash was calculated when there were non-ASCII characters in
	the xattr name, when the hash would be different depending on whether
	the C 'char' type was signed or unsigned.  To address this bug, starting
	with e2fsprogs 1.46.6+ and Linux 6.2+, we will accept either the signed
	or unsigned hash variant, but only set the unsigned hash variant.  Since
	extended attribute names are in practice composed of ASCII characters,
	other than various tests (such as generic/454), most users will
	hopefully not notice this change.
	Avoid triggering udev in dumpe2fs and "resize2fs -P" for file systems
	with MMP enabled by opening the device read-only when reading the MMP
	block.
	Fix MMP handling so it can notice when another writer has modify the MMP
	block out from under it when stopping a MMP sessions.
	Fix tune2fs so it will detect another device stealing the MMP sessions
	while rewriting metadata checksums.
	E2fsck will now check to make sure the journal inode does not have the
	encrypt flag set.
	Fix a deadlock bug in e2fsck's error handler when there are errors
	trying to write to the file system.
	Fix a bug where e2fsck could fail when specifying an undo file and an
	explicit superblock number.
	Fix e2image so it won't potentially loop forever for certain invalid
	file systems.
	Fix resize2fs to honor the E2FSPROGS_FAKE_TIME environment variable.
	This allows embedded system builders who use resize2fs as part of their
	image build process to create reproducible images.
	Fix tune2fs to avoid a crash if the journal replay fails and to make
	sure its exit status is non-zero if there is some failure.
	Fix tune2fs, fuse2fs, and debugsfs to update j_tail_sequence when
	replaying the journal.
	Add additional bullet-proofing for very badly corrupted file systems.
	Try avoid UBSAN warnings, null pointer derferences, and other memory
	bugs.  (Addresses CVE-2022-1304)
	Don't fail when the source directory for mke2fs -d doesn't support
	extended attributese.
	Check for and handle malloc() failures when computing the log filename
	in e2fsck and in the libss library.
	Fix tune2fs and e2fsck to accept pathames which include '=' characters.
	Previously arguments to tune2fs and e2fsck which included '=' characters
	are presumed to be blkid specifiers such as UUID=xxx or LABEL=yyy.  If a
	specifier is both a valid pathname name and blkid tag name specifier,
	priority is given to a blkid resolved pathname.
	Improve tune2fs's error messages.
	Fix a bug in tune2fs which could cause it to crash if device goes
	off-line just as it being opened.
	Fix the fsck driver so if it is interrupted while running fsck -N it
	doesn't end up kllling all processes on the system.
	Fix a crash in badblocks when the user specifies an overly large
	number of blocks tested at a time in read/write or nondestructive
	mode.
	Update and clarify's chattr's man page and usage message.  Fix spelling
	typo's in a variety of different man pages and comments.
Performance, Internal Implementation, Development Support etc.
	Update to autoconf 2.71.
	Update flags used to create shared library on Darwin/MacOS.
	Speed up e2fsck's clonning of multiply-claimed blocks so it is
	substantially faster on very large file systems.
	Add tests/fuzz directory with fuzzers from oss-fuzz.
	Add a Github Actions configuration file so that Github will run CI tests
	on Linux, Windows and MacOS on a push to the e2fsprogs github repo.
	Make the mtab parsing in ext2fs_check_mount_point() more careful so it
	won't get confused when a block device shows up in the mnt_name field
	for a virtual file system.
	Fix the libss's Makefile to create the man page directory before trying
	to install its man page.
	Fix various Coverity and compiler warnings.
	Make tests more portable on various different OS's and system
	configurations (e.g., with SELinux enabled, MacOS, and Windows)
	Use mallinfo2() instead of mallinfo() where avilable, since mallinfo()
	is deprecated on newer glibc versions.
	E2fsck will no longer do a full scan of disconnected directory when
	trying to print the parent directory, which is pointless and can slow
	down e2fsck if there are a large number of disconnected directories.
	Debugfs will now print the extended attribute's e_hash field.
	Fix the setup-schroot script to work on non-Linux platforms.
	Fix ext2fs_compare_generic_bmap() so it correctly compares all of the
	bits in the bitmap, and so that it works correctly when comparing a
	bitarray bitmap with a rbtree-based bitmap.  (Fortunately, none of the
	programs in e2fsprogs uses bitmap comparison functions.)
	Fix memory leaks on error paths.
	Add support for the configure option --enable-largefile so that
	e2fsprogs can utilize largefile support for the MUSL C library.
	Add an note that the dict library code has been modified, as required by
	the Kazlib license.
	Synchronized changes from Android's AOSP e2fsprogs tree.
	Updated config.guess and config.sub with newer versions from the FSF.
	Add Friulian translation.
	Update Chinese, Czech, Dutch, French, German, Malay, Polish, Serbian,
	Spanish, Swedish, and Ukrainian translations.

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 lfs/e2fsprogs | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
  

Patch

diff --git a/lfs/e2fsprogs b/lfs/e2fsprogs
index 4758b5401..8db1c215c 100644
--- a/lfs/e2fsprogs
+++ b/lfs/e2fsprogs
@@ -24,7 +24,7 @@ 
 
 include Config
 
-VER      = 1.46.5
+VER      = 1.47.0
 
 THISAPP    = e2fsprogs-$(VER)
 DL_FILE    = $(THISAPP).tar.xz
@@ -40,7 +40,7 @@  objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_BLAKE2 = 8d8c02e891c464782a7cff518c41d793fc73366b57e17d80ffc5afd96e6144e354290e667e9710509a9dde4e5dab7e7185c5bf084c5bfd26219f05e5e92e0830
+$(DL_FILE)_BLAKE2 = 84f58b05a9f0e14e1a66c6e5171ff23b022f51c4e9a02d4d6d1d26c91909f3c7ec9c9f0462663a4457b4479043774502b8891f691e58a61f4ef6bf9ba33f33aa
 
 install : $(TARGET)