[1/2] conntrack-tools: Update to version 1.4.7

Message ID 20221118225043.1361845-1-adolf.belka@ipfire.org
State Accepted
Commit b685b5e7e9e2f6d48cae352431d82f3a96962e3d
Headers
Series [1/2] conntrack-tools: Update to version 1.4.7 |

Commit Message

Adolf Belka Nov. 18, 2022, 10:50 p.m. UTC
  - Update from 1.4.6 to 1.4.7
- Update of rootfile not required
- Requires update fo libnetfilter_conntrack from 1.0.8 to 1.0.9
- Changelog
    conntrack-tools 1.4.7
     This release contains new features:
	* IPS_HW_OFFLOAD flag specifies that a conntrack entry has been
	  offloaded into the hardware
	* 'clash_resolve' and 'chaintoolong' stats counters
	* Default to unspec family if '-f' flag is absent to improve support for
	  dual-stack setups
	* Support filtering events by IP address family
	* Support flushing per IP address family
	* Add "save" output format representing data in conntrack parameters
	* Support loading conntrack commands from a batch file, e.g. generated
	  by "save" output format
	* Annotate portid in events by the program name (if found)
	* Accept yes/no as synonyms to on/off in conntrackd.conf
	* Support user space helper auto-loading upon daemon startup, relieving
	  users from manual 'nfct add helper' calls
	* Filter dumps by status on kernel side if possible
	* Accept to filter for any status other than SEEN_REPLY using
	  'UNREPLIED'
	* Use libmnl internally
	* Reuse netlink socket for improved performance with bulk CT entry loads
	* Remove '-o userspace' flag and always tag user space triggered events
	* Introduce '-A' command, a variant of '-I' which does not fail if the
	  entry exists already
     ... and fixes:
	* ICMP entry creation would fail when reply data was specified
	* Sync zone value also
	* Log external inject problems as warning only
	* Endianness bug parsing IP addresses
	* Ignore conntrack ID when looking up cache entries to allow for stuck
	  old ones to be replaced eventually
	* Broken parsing of IPv6 M-SEARCH requests in ssdp cthelper
	* Eliminate the need for lazy binding in nfct
	* Fix for use of unknown protocol values
	* Sanitize protocol value parsing, catch illegal values
	* Ensure unknown protocol values are included in '-o save' dumps
     ... and documentation updates:
	* Fixed examples in manual
	* Refer to nf_conntrack sysctl instead of the deprecated ip_conntrack
	  one
	* Misc updates to the manual
	* Add an older example script creating an active-active setup using the
	  cluster match

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 lfs/conntrack-tools | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
  

Comments

Michael Tremer Nov. 19, 2022, 11:52 a.m. UTC | #1
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>

> On 18 Nov 2022, at 22:50, Adolf Belka <adolf.belka@ipfire.org> wrote:
> 
> - Update from 1.4.6 to 1.4.7
> - Update of rootfile not required
> - Requires update fo libnetfilter_conntrack from 1.0.8 to 1.0.9
> - Changelog
>    conntrack-tools 1.4.7
>     This release contains new features:
> * IPS_HW_OFFLOAD flag specifies that a conntrack entry has been
>  offloaded into the hardware
> * 'clash_resolve' and 'chaintoolong' stats counters
> * Default to unspec family if '-f' flag is absent to improve support for
>  dual-stack setups
> * Support filtering events by IP address family
> * Support flushing per IP address family
> * Add "save" output format representing data in conntrack parameters
> * Support loading conntrack commands from a batch file, e.g. generated
>  by "save" output format
> * Annotate portid in events by the program name (if found)
> * Accept yes/no as synonyms to on/off in conntrackd.conf
> * Support user space helper auto-loading upon daemon startup, relieving
>  users from manual 'nfct add helper' calls
> * Filter dumps by status on kernel side if possible
> * Accept to filter for any status other than SEEN_REPLY using
>  'UNREPLIED'
> * Use libmnl internally
> * Reuse netlink socket for improved performance with bulk CT entry loads
> * Remove '-o userspace' flag and always tag user space triggered events
> * Introduce '-A' command, a variant of '-I' which does not fail if the
>  entry exists already
>     ... and fixes:
> * ICMP entry creation would fail when reply data was specified
> * Sync zone value also
> * Log external inject problems as warning only
> * Endianness bug parsing IP addresses
> * Ignore conntrack ID when looking up cache entries to allow for stuck
>  old ones to be replaced eventually
> * Broken parsing of IPv6 M-SEARCH requests in ssdp cthelper
> * Eliminate the need for lazy binding in nfct
> * Fix for use of unknown protocol values
> * Sanitize protocol value parsing, catch illegal values
> * Ensure unknown protocol values are included in '-o save' dumps
>     ... and documentation updates:
> * Fixed examples in manual
> * Refer to nf_conntrack sysctl instead of the deprecated ip_conntrack
>  one
> * Misc updates to the manual
> * Add an older example script creating an active-active setup using the
>  cluster match
> 
> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
> ---
> lfs/conntrack-tools | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/lfs/conntrack-tools b/lfs/conntrack-tools
> index 7bfd71d89..2296c7ca8 100644
> --- a/lfs/conntrack-tools
> +++ b/lfs/conntrack-tools
> @@ -24,7 +24,7 @@
> 
> include Config
> 
> -VER        = 1.4.6
> +VER        = 1.4.7
> 
> THISAPP    = conntrack-tools-$(VER)
> DL_FILE    = $(THISAPP).tar.bz2
> @@ -42,7 +42,7 @@ objects = $(DL_FILE)
> 
> $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
> 
> -$(DL_FILE)_BLAKE2 = 7c1ee1c5fc2b6f9d33c6cf850eca80978b8763317b1a76892cefb776130564f15fbd4e4554fdb08dbba93d9f16b7e4624a1b4dd5a631f747f5fcc0a5b01b8d5e
> +$(DL_FILE)_BLAKE2 = 42a3cacf8a32a5b8b688a9fd68f66024c591e9814ef3cc349456691094bab0fae15bb1c00befa178b0f8e845bf6fc00715cbf9db55cd7bf2d155c2dfd55f9b1a
> 
> install : $(TARGET)
> 
> -- 
> 2.38.1
>
  

Patch

diff --git a/lfs/conntrack-tools b/lfs/conntrack-tools
index 7bfd71d89..2296c7ca8 100644
--- a/lfs/conntrack-tools
+++ b/lfs/conntrack-tools
@@ -24,7 +24,7 @@ 
 
 include Config
 
-VER        = 1.4.6
+VER        = 1.4.7
 
 THISAPP    = conntrack-tools-$(VER)
 DL_FILE    = $(THISAPP).tar.bz2
@@ -42,7 +42,7 @@  objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_BLAKE2 = 7c1ee1c5fc2b6f9d33c6cf850eca80978b8763317b1a76892cefb776130564f15fbd4e4554fdb08dbba93d9f16b7e4624a1b4dd5a631f747f5fcc0a5b01b8d5e
+$(DL_FILE)_BLAKE2 = 42a3cacf8a32a5b8b688a9fd68f66024c591e9814ef3cc349456691094bab0fae15bb1c00befa178b0f8e845bf6fc00715cbf9db55cd7bf2d155c2dfd55f9b1a
 
 install : $(TARGET)