[18/35] python3-rsa: Update to version 4.8 and python-3.10

  - Update from 4.0 to 4.8
- Update of rootfile
- Changelog
- Switch to [Poetry](https://python-poetry.org/) for dependency and release management.
- Compatibility with Python 3.10.
- Chain exceptions using `raise new_exception from old_exception`
  ([#157](https://github.com/sybrenstuvel/python-rsa/pull/157))
- Added marker file for PEP 561. This will allow type checking tools in dependent projects
  to use type annotations from Python-RSA
  ([#136](https://github.com/sybrenstuvel/python-rsa/pull/136)).
- Use the Chinese Remainder Theorem when decrypting with a private key. This
  makes decryption 2-4x faster
  ([#163](https://github.com/sybrenstuvel/python-rsa/pull/163)).
- Fix picking/unpickling issue introduced in 4.7
  ([#173](https://github.com/sybrenstuvel/python-rsa/issues/173))
- Fix threading issue introduced in 4.7
  ([#173](https://github.com/sybrenstuvel/python-rsa/issues/173))
- Fix [#165](https://github.com/sybrenstuvel/python-rsa/issues/165):
  CVE-2020-25658 - Bleichenbacher-style timing oracle in PKCS#1 v1.5 decryption
  code
- Add padding length check as described by PKCS#1 v1.5 (Fixes
  [#164](https://github.com/sybrenstuvel/python-rsa/issues/164))
- Reuse of blinding factors to speed up blinding operations.
  Fixes [#162](https://github.com/sybrenstuvel/python-rsa/issues/162).
- Declare & test support for Python 3.9
Version 4.4 and 4.6 are almost a re-tagged release of version 4.2. It requires
Python 3.5+. To avoid older Python installations from trying to upgrade to RSA
4.4, this is now made explicit in the `python_requires` argument in `setup.py`.
There was a mistake releasing 4.4 as "3.5+ only", which made it necessary to
retag 4.4 as 4.6 as well.
No functional changes compared to version 4.2.
Version 4.3 and 4.5 are almost a re-tagged release of version 4.0. It is the
last to support Python 2.7. This is now made explicit in the `python_requires`
argument in `setup.py`. Python 3.4 is not supported by this release. There was a
mistake releasing 4.4 as "3.5+ only", which made it necessary to retag 4.3 as
4.5 as well.
Two security fixes have also been backported, so 4.3 = 4.0 + these two fixes.
- Choose blinding factor relatively prime to N. Thanks Christian Heimes for pointing this out.
- Reject cyphertexts (when decrypting) and signatures (when verifying) that have
  been modified by prepending zero bytes. This resolves CVE-2020-13757. Thanks
  Carnil for pointing this out.
- Rolled back the switch to Poetry, and reverted back to using Pipenv + setup.py
  for dependency management. There apparently is an issue no-binary installs of
  packages build with Poetry. This fixes
  [#148](https://github.com/sybrenstuvel/python-rsa/issues/148)
- Limited SHA3 support to those Python versions (3.6+) that support it natively.
  The third-party library that adds support for this to Python 3.5 is a binary
  package, and thus breaks the pure-Python nature of Python-RSA.
  This should fix [#147](https://github.com/sybrenstuvel/python-rsa/issues/147).
- Added support for Python 3.8.
- Dropped support for Python 2 and 3.4.
- Added type annotations to the source code. This will make Python-RSA easier to use in
  your IDE, and allows better type checking.
- Added static type checking via [MyPy](http://mypy-lang.org/).
- Fix [#129](https://github.com/sybrenstuvel/python-rsa/issues/129) Installing from source
  gives UnicodeDecodeError.
- Switched to using [Poetry](https://poetry.eustace.io/) for package
  management.
- Added support for SHA3 hashing: SHA3-256, SHA3-384, SHA3-512. This
  is natively supported by Python 3.6+ and supported via a third-party
  library on Python 3.5.
- Choose blinding factor relatively prime to N. Thanks Christian Heimes for pointing this out.
- Reject cyphertexts (when decrypting) and signatures (when verifying) that have
  been modified by prepending zero bytes. This resolves CVE-2020-13757. Thanks
  Adelapie for pointing this out.

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 config/rootfiles/packages/python3-rsa | 48 +++++++++++++--------------
 lfs/python3-rsa                       |  8 ++---
 2 files changed, 28 insertions(+), 28 deletions(-)
  

Reviewed-by: Peter Müller <peter.mueller@ipfire.org>

> - Update from 4.0 to 4.8
> - Update of rootfile
> - Changelog
> - Switch to [Poetry](https://python-poetry.org/) for dependency and release management.
> - Compatibility with Python 3.10.
> - Chain exceptions using `raise new_exception from old_exception`
>   ([#157](https://github.com/sybrenstuvel/python-rsa/pull/157))
> - Added marker file for PEP 561. This will allow type checking tools in dependent projects
>   to use type annotations from Python-RSA
>   ([#136](https://github.com/sybrenstuvel/python-rsa/pull/136)).
> - Use the Chinese Remainder Theorem when decrypting with a private key. This
>   makes decryption 2-4x faster
>   ([#163](https://github.com/sybrenstuvel/python-rsa/pull/163)).
> - Fix picking/unpickling issue introduced in 4.7
>   ([#173](https://github.com/sybrenstuvel/python-rsa/issues/173))
> - Fix threading issue introduced in 4.7
>   ([#173](https://github.com/sybrenstuvel/python-rsa/issues/173))
> - Fix [#165](https://github.com/sybrenstuvel/python-rsa/issues/165):
>   CVE-2020-25658 - Bleichenbacher-style timing oracle in PKCS#1 v1.5 decryption
>   code
> - Add padding length check as described by PKCS#1 v1.5 (Fixes
>   [#164](https://github.com/sybrenstuvel/python-rsa/issues/164))
> - Reuse of blinding factors to speed up blinding operations.
>   Fixes [#162](https://github.com/sybrenstuvel/python-rsa/issues/162).
> - Declare & test support for Python 3.9
> Version 4.4 and 4.6 are almost a re-tagged release of version 4.2. It requires
> Python 3.5+. To avoid older Python installations from trying to upgrade to RSA
> 4.4, this is now made explicit in the `python_requires` argument in `setup.py`.
> There was a mistake releasing 4.4 as "3.5+ only", which made it necessary to
> retag 4.4 as 4.6 as well.
> No functional changes compared to version 4.2.
> Version 4.3 and 4.5 are almost a re-tagged release of version 4.0. It is the
> last to support Python 2.7. This is now made explicit in the `python_requires`
> argument in `setup.py`. Python 3.4 is not supported by this release. There was a
> mistake releasing 4.4 as "3.5+ only", which made it necessary to retag 4.3 as
> 4.5 as well.
> Two security fixes have also been backported, so 4.3 = 4.0 + these two fixes.
> - Choose blinding factor relatively prime to N. Thanks Christian Heimes for pointing this out.
> - Reject cyphertexts (when decrypting) and signatures (when verifying) that have
>   been modified by prepending zero bytes. This resolves CVE-2020-13757. Thanks
>   Carnil for pointing this out.
> - Rolled back the switch to Poetry, and reverted back to using Pipenv + setup.py
>   for dependency management. There apparently is an issue no-binary installs of
>   packages build with Poetry. This fixes
>   [#148](https://github.com/sybrenstuvel/python-rsa/issues/148)
> - Limited SHA3 support to those Python versions (3.6+) that support it natively.
>   The third-party library that adds support for this to Python 3.5 is a binary
>   package, and thus breaks the pure-Python nature of Python-RSA.
>   This should fix [#147](https://github.com/sybrenstuvel/python-rsa/issues/147).
> - Added support for Python 3.8.
> - Dropped support for Python 2 and 3.4.
> - Added type annotations to the source code. This will make Python-RSA easier to use in
>   your IDE, and allows better type checking.
> - Added static type checking via [MyPy](http://mypy-lang.org/).
> - Fix [#129](https://github.com/sybrenstuvel/python-rsa/issues/129) Installing from source
>   gives UnicodeDecodeError.
> - Switched to using [Poetry](https://poetry.eustace.io/) for package
>   management.
> - Added support for SHA3 hashing: SHA3-256, SHA3-384, SHA3-512. This
>   is natively supported by Python 3.6+ and supported via a third-party
>   library on Python 3.5.
> - Choose blinding factor relatively prime to N. Thanks Christian Heimes for pointing this out.
> - Reject cyphertexts (when decrypting) and signatures (when verifying) that have
>   been modified by prepending zero bytes. This resolves CVE-2020-13757. Thanks
>   Adelapie for pointing this out.
> 
> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
> ---
>  config/rootfiles/packages/python3-rsa | 48 +++++++++++++--------------
>  lfs/python3-rsa                       |  8 ++---
>  2 files changed, 28 insertions(+), 28 deletions(-)
> 
> diff --git a/config/rootfiles/packages/python3-rsa b/config/rootfiles/packages/python3-rsa
> index ae16a6649..73ac732ad 100644
> --- a/config/rootfiles/packages/python3-rsa
> +++ b/config/rootfiles/packages/python3-rsa
> @@ -4,27 +4,27 @@ usr/bin/pyrsa-keygen
>  usr/bin/pyrsa-priv2pub
>  usr/bin/pyrsa-sign
>  usr/bin/pyrsa-verify
> -#usr/lib/python3.8/site-packages/rsa
> -#usr/lib/python3.8/site-packages/rsa-4.0-py3.8.egg-info
> -#usr/lib/python3.8/site-packages/rsa-4.0-py3.8.egg-info/PKG-INFO
> -#usr/lib/python3.8/site-packages/rsa-4.0-py3.8.egg-info/SOURCES.txt
> -#usr/lib/python3.8/site-packages/rsa-4.0-py3.8.egg-info/dependency_links.txt
> -#usr/lib/python3.8/site-packages/rsa-4.0-py3.8.egg-info/entry_points.txt
> -#usr/lib/python3.8/site-packages/rsa-4.0-py3.8.egg-info/requires.txt
> -#usr/lib/python3.8/site-packages/rsa-4.0-py3.8.egg-info/top_level.txt
> -usr/lib/python3.8/site-packages/rsa/__init__.py
> -usr/lib/python3.8/site-packages/rsa/_compat.py
> -usr/lib/python3.8/site-packages/rsa/asn1.py
> -usr/lib/python3.8/site-packages/rsa/cli.py
> -usr/lib/python3.8/site-packages/rsa/common.py
> -usr/lib/python3.8/site-packages/rsa/core.py
> -usr/lib/python3.8/site-packages/rsa/key.py
> -usr/lib/python3.8/site-packages/rsa/machine_size.py
> -usr/lib/python3.8/site-packages/rsa/parallel.py
> -usr/lib/python3.8/site-packages/rsa/pem.py
> -usr/lib/python3.8/site-packages/rsa/pkcs1.py
> -usr/lib/python3.8/site-packages/rsa/pkcs1_v2.py
> -usr/lib/python3.8/site-packages/rsa/prime.py
> -usr/lib/python3.8/site-packages/rsa/randnum.py
> -usr/lib/python3.8/site-packages/rsa/transform.py
> -usr/lib/python3.8/site-packages/rsa/util.py
> +#usr/lib/python3.10/site-packages/rsa
> +#usr/lib/python3.10/site-packages/rsa-4.8-py3.10.egg-info
> +#usr/lib/python3.10/site-packages/rsa-4.8-py3.10.egg-info/PKG-INFO
> +#usr/lib/python3.10/site-packages/rsa-4.8-py3.10.egg-info/SOURCES.txt
> +#usr/lib/python3.10/site-packages/rsa-4.8-py3.10.egg-info/dependency_links.txt
> +#usr/lib/python3.10/site-packages/rsa-4.8-py3.10.egg-info/entry_points.txt
> +#usr/lib/python3.10/site-packages/rsa-4.8-py3.10.egg-info/requires.txt
> +#usr/lib/python3.10/site-packages/rsa-4.8-py3.10.egg-info/top_level.txt
> +usr/lib/python3.10/site-packages/rsa/__init__.py
> +usr/lib/python3.10/site-packages/rsa/_compat.py
> +usr/lib/python3.10/site-packages/rsa/asn1.py
> +usr/lib/python3.10/site-packages/rsa/cli.py
> +usr/lib/python3.10/site-packages/rsa/common.py
> +usr/lib/python3.10/site-packages/rsa/core.py
> +usr/lib/python3.10/site-packages/rsa/key.py
> +usr/lib/python3.10/site-packages/rsa/parallel.py
> +usr/lib/python3.10/site-packages/rsa/pem.py
> +usr/lib/python3.10/site-packages/rsa/pkcs1.py
> +usr/lib/python3.10/site-packages/rsa/pkcs1_v2.py
> +usr/lib/python3.10/site-packages/rsa/prime.py
> +usr/lib/python3.10/site-packages/rsa/py.typed
> +usr/lib/python3.10/site-packages/rsa/randnum.py
> +usr/lib/python3.10/site-packages/rsa/transform.py
> +usr/lib/python3.10/site-packages/rsa/util.py
> diff --git a/lfs/python3-rsa b/lfs/python3-rsa
> index 79a835220..7e575c3c7 100644
> --- a/lfs/python3-rsa
> +++ b/lfs/python3-rsa
> @@ -24,15 +24,15 @@
>  
>  include Config
>  
> -VER        = 4.0
> +VER        = 4.8
>  
>  THISAPP    = rsa-$(VER)
>  DL_FILE    = $(THISAPP).tar.gz
>  DL_FROM    = $(URL_IPFIRE)
> -DIR_APP    = $(DIR_SRC)/python-rsa-version-$(VER)
> +DIR_APP    = $(DIR_SRC)/$(THISAPP)
>  TARGET     = $(DIR_INFO)/$(THISAPP)
>  PROG       = python3-rsa
> -PAK_VER    = 3
> +PAK_VER    = 4
>  
>  DEPS       =
>  
> @@ -44,7 +44,7 @@ objects = $(DL_FILE)
>  
>  $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>  
> -$(DL_FILE)_MD5 = 13a71a55588c97de45fb9887cae6da90
> +$(DL_FILE)_MD5 = edb224f927cf8f53ff530ab04d092c69
>  
>  install : $(TARGET)
>