e2fsprogs: Update to version 1.46.5

  - Update from 1.46.3 to 1.46.5
- Update of rootfile not required
- Changelog
  1.46.5 (December 30, 2021)
    Updates/Fixes since v1.46.4:
    UI and Features
     When resizing a file system and the inode count exceeds the 2**32
      maximum, if resize2fs can successfully perform the resize by dropping
      the last block group, resize2fs will do that in order to allow the file
      system grow operation to succeed.  For example, using the default inode
      ratio size of 16k, this will allow a successful resize to 64TB - 128MB
      when the storage device is 64TB.
    Fixes
     Avoid a potential infinite loop in resize2fs -P when the file system is
      corrupted (introduced in e2fsprogs 1.45.5).  (Addresses github issue
      https://github.com/tytso/e2fsprogs/issues/94)
     E2fsck now updates the bg_checksum after fixing problems in the block
      group descriptor, which eliminates some unnecessary messages printed or
      asked of the system administrator.
     Fixed some potential deadlock problems in the unix_io handler in the case
      of I/O errors.  The fix should also improve the performance of parallel
      bitmap loading.
     Fixed e2fsck's fast commit handling which could result it in crashing
      when trying to merge extents when there were none available to be
      merged.
     Fix e2fsck's support of quota limit data, which could sometimes get
      dropped when the quota data needs to be regenerated, or when processing
      the orphan list.
     Fix tune2fs to correctly transfer the quota limits when converting quota
      files to the internal quota inodes.  Also add support for tune2fs to
      properly handle the older version 0 quota files.
     Fix debugfs's get_quota and list_quota commands so that the header of
      the report printed by these commands correctly reflect that the units of
      used space is in bytes instead of blocks.
    Performance, Internal Implementation, Development Support etc.
     Add some additional packages to the setup-schroot script to account for
      the fact that the script can be run on older Debian distributions and so
      the build dependencies might omit some packages needed to build
      e2fsprogs on unstable version of Debian.
     Reduce resize2fs's CPU overhead when counting the number of blocks in
      use which can reduce the wall clock time for very large file systems
      by substantial amount.
     Teach libuuid to use getrandom() or getentropy() if available in favor
      of reading from /dev/[u]random.
     Teach libss to use libreadline.so.8 if it is available.
     Update some test expect files to fix some regression tests that were
      broken in e2fsprogs 1.46.4.
     If the PRINT_FAILED environment variable is set, failed tests will
      display the diff output to make it easier to debug test failures on
      autobuilders.
     Fix various compiler warnings.
     Update tst_getsize to use ext2fs_get_size2() to support testing devices
      which are larger than 2**32 sectors.
     Fixed spelling mistakes in the mke2fs.conf man page.
     Update Chinese, Malay, Serbian, Spanish, Swedish, and Ukrainian
      translations.
  1.46.4 (August 18, 2021)
    Updates/Fixes since v1.46.3:
    UI and Features
     The defaults for mke2fs now call for 256 byte inodes for all file
      systems (with the exception of file systems for the GNU Hurd, which only
      supports 128 byte inodes).  Creating non-Hurd file systems with 128 byte
      inodes will trigger a warning message to make sure users are aware of
      the potential problems of using small/legacy inode sizes.
     The bigalloc feature is now considered supported if the cluster size no
      more than 16 times the block size.  So the mke2fs program has been
      changes to only warn if the cluster size is larger than that.
    Fixes
     E2fsck now checks to make sure directory entries do not reference
      internal quota inodes.
     E2image now includes the quota inodes when creating file system image,
      since they are part of the file system metadata.
     E2fsck now properly accounts the quota usage of the project quota file.
     Fix a regression introduced in 1.64.3 where attempting to create a file
      system image using mke2fs into a non-existent file would fail.
      (Addresses Debian Bug: #992094)
     Fix mke2fs to correctly create Posix ACL's on big-endian systems when
      copying files from a directory hierarchy.
     Updated and clarified the resize2fs man page.  (Addresses Debian Bug:
      #979411)
    Performance, Internal Implementation, Development Support etc.
     Improve various regression tests to be more portable and to reflect the
      new default inode size of 256 byte inodes, even for small file systems.
     Fixed a GNU Hurd portability problem which was causing tests to fail.
     Fixed a test failure in f_baddotdir on big-endian systems.  This wasn't
      necessarily a bug per se in e2fsck, but rather e2fsck having different
      behaviour on big-endian systems.  (Addresses Debian Bug: #991922)
     Use WantedBy=multi-user.target in e2scrub_reap.service.  (Addresses
      Debian Bug: #991349)
     Synchronize e2fsck/recovery.c with the kernel's fs/jbd2/recovery.c
     Fix various Coverity and compiler warnings.
     Fix various error pathes to make sure we don't leak resources or
      potentially use or try to free uninitialized pointers.
     Added a setup-schroot command for use on Debian porter boxes.
     Updated config.guess and config.sub with newer versions from the FSF.
     Update Czech, Dutch, French, Polish, Portuguese, and Swedish translations.

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 lfs/e2fsprogs | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
  

Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>

> On 3 Jan 2022, at 12:45, Adolf Belka <adolf.belka@ipfire.org> wrote:
> 
> - Update from 1.46.3 to 1.46.5
> - Update of rootfile not required
> - Changelog
>  1.46.5 (December 30, 2021)
>    Updates/Fixes since v1.46.4:
>    UI and Features
>     When resizing a file system and the inode count exceeds the 2**32
>      maximum, if resize2fs can successfully perform the resize by dropping
>      the last block group, resize2fs will do that in order to allow the file
>      system grow operation to succeed.  For example, using the default inode
>      ratio size of 16k, this will allow a successful resize to 64TB - 128MB
>      when the storage device is 64TB.
>    Fixes
>     Avoid a potential infinite loop in resize2fs -P when the file system is
>      corrupted (introduced in e2fsprogs 1.45.5).  (Addresses github issue
>      https://github.com/tytso/e2fsprogs/issues/94)
>     E2fsck now updates the bg_checksum after fixing problems in the block
>      group descriptor, which eliminates some unnecessary messages printed or
>      asked of the system administrator.
>     Fixed some potential deadlock problems in the unix_io handler in the case
>      of I/O errors.  The fix should also improve the performance of parallel
>      bitmap loading.
>     Fixed e2fsck's fast commit handling which could result it in crashing
>      when trying to merge extents when there were none available to be
>      merged.
>     Fix e2fsck's support of quota limit data, which could sometimes get
>      dropped when the quota data needs to be regenerated, or when processing
>      the orphan list.
>     Fix tune2fs to correctly transfer the quota limits when converting quota
>      files to the internal quota inodes.  Also add support for tune2fs to
>      properly handle the older version 0 quota files.
>     Fix debugfs's get_quota and list_quota commands so that the header of
>      the report printed by these commands correctly reflect that the units of
>      used space is in bytes instead of blocks.
>    Performance, Internal Implementation, Development Support etc.
>     Add some additional packages to the setup-schroot script to account for
>      the fact that the script can be run on older Debian distributions and so
>      the build dependencies might omit some packages needed to build
>      e2fsprogs on unstable version of Debian.
>     Reduce resize2fs's CPU overhead when counting the number of blocks in
>      use which can reduce the wall clock time for very large file systems
>      by substantial amount.
>     Teach libuuid to use getrandom() or getentropy() if available in favor
>      of reading from /dev/[u]random.
>     Teach libss to use libreadline.so.8 if it is available.
>     Update some test expect files to fix some regression tests that were
>      broken in e2fsprogs 1.46.4.
>     If the PRINT_FAILED environment variable is set, failed tests will
>      display the diff output to make it easier to debug test failures on
>      autobuilders.
>     Fix various compiler warnings.
>     Update tst_getsize to use ext2fs_get_size2() to support testing devices
>      which are larger than 2**32 sectors.
>     Fixed spelling mistakes in the mke2fs.conf man page.
>     Update Chinese, Malay, Serbian, Spanish, Swedish, and Ukrainian
>      translations.
>  1.46.4 (August 18, 2021)
>    Updates/Fixes since v1.46.3:
>    UI and Features
>     The defaults for mke2fs now call for 256 byte inodes for all file
>      systems (with the exception of file systems for the GNU Hurd, which only
>      supports 128 byte inodes).  Creating non-Hurd file systems with 128 byte
>      inodes will trigger a warning message to make sure users are aware of
>      the potential problems of using small/legacy inode sizes.
>     The bigalloc feature is now considered supported if the cluster size no
>      more than 16 times the block size.  So the mke2fs program has been
>      changes to only warn if the cluster size is larger than that.
>    Fixes
>     E2fsck now checks to make sure directory entries do not reference
>      internal quota inodes.
>     E2image now includes the quota inodes when creating file system image,
>      since they are part of the file system metadata.
>     E2fsck now properly accounts the quota usage of the project quota file.
>     Fix a regression introduced in 1.64.3 where attempting to create a file
>      system image using mke2fs into a non-existent file would fail.
>      (Addresses Debian Bug: #992094)
>     Fix mke2fs to correctly create Posix ACL's on big-endian systems when
>      copying files from a directory hierarchy.
>     Updated and clarified the resize2fs man page.  (Addresses Debian Bug:
>      #979411)
>    Performance, Internal Implementation, Development Support etc.
>     Improve various regression tests to be more portable and to reflect the
>      new default inode size of 256 byte inodes, even for small file systems.
>     Fixed a GNU Hurd portability problem which was causing tests to fail.
>     Fixed a test failure in f_baddotdir on big-endian systems.  This wasn't
>      necessarily a bug per se in e2fsck, but rather e2fsck having different
>      behaviour on big-endian systems.  (Addresses Debian Bug: #991922)
>     Use WantedBy=multi-user.target in e2scrub_reap.service.  (Addresses
>      Debian Bug: #991349)
>     Synchronize e2fsck/recovery.c with the kernel's fs/jbd2/recovery.c
>     Fix various Coverity and compiler warnings.
>     Fix various error pathes to make sure we don't leak resources or
>      potentially use or try to free uninitialized pointers.
>     Added a setup-schroot command for use on Debian porter boxes.
>     Updated config.guess and config.sub with newer versions from the FSF.
>     Update Czech, Dutch, French, Polish, Portuguese, and Swedish translations.
> 
> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
> ---
> lfs/e2fsprogs | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/lfs/e2fsprogs b/lfs/e2fsprogs
> index f417b77f4..64786860c 100644
> --- a/lfs/e2fsprogs
> +++ b/lfs/e2fsprogs
> @@ -24,7 +24,7 @@
> 
> include Config
> 
> -VER      = 1.46.3
> +VER      = 1.46.5
> 
> THISAPP    = e2fsprogs-$(VER)
> DL_FILE    = $(THISAPP).tar.xz
> @@ -40,7 +40,7 @@ objects = $(DL_FILE)
> 
> $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
> 
> -$(DL_FILE)_MD5 = ab7e15cafcd34681db907d3fcb395f95
> +$(DL_FILE)_MD5 = bb7d0c212dd99affa5fc512a3c7a949b
> 
> install : $(TARGET)
> 
> -- 
> 2.34.1
>