monit: Update to 5.28.1

  For details see:
https://mmonit.com/monit/changes/

    New: Issue #979: If filesystem mount flags changed, show both old
    and new value. Originally only the new value was reported.

    Fixed: Issue #960: The memory usage may report wrong value if system
    memory size changed after Monit start. The problem was frequent
    on KVM/LXC containers where MemTotal is dynamicaly updated.

    Fixed: Issue #965: Monit CLI: if a custom configuration file was
    used with the -c option, and the file cannot be read by Monit,
    an AssertException was thrown. Monit will report normal error
    instead of the exception now.

    Fixed: Issue #966: Monit CLI: The service name pattern was changed
    to case-sensitive in Monit 5.28.0. Revert the behaviour back
    to case-insensitive.

    Fixed: Issue #971: The LINK UP and LINK DOWN tests now support short
    form of the optional ELSE condition, in addition to the verbose ELSE
    IF <SUCCEEDED|FAILED> form.

    Fixed: Issue #976: The space free test recovery always reported
    value in percent, regardless of the test setting. If the test uses
    absolute limit, Monit will report absolute space usage now.

    Fixed: Issue #986: Services checks with custom schedule (the EVERY
    statement) did set the data collection timestamp even if the
    monitoring was skipped in the given cycle. The timestamp is now
    updated only when the check was performed.

    Fixed: Issue #990: Monit built with libressl may crash during
    verification of the expired SSL certificate.

    Fixed: Issue #968: Systemd and upstart templates: templates used
    to set the path to the configuration file in the sysconfdir, which
    is optionally set via the configure script during the compilation.
    The path wasn't fully expanded in the template though, so it was
    invalid. The template doesn't specify the explicit path now and lets
    Monit search for the configuration file in all supported locations
    (including the sysconfdir).

    Changed: Issue #984: The permission check of the SSL PEM key file
    allows group read permissions now (originally Monit enforced that
    the file is readable only by the file owner).

Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
---
 lfs/monit | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
  

Thank you!

Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>

> On 31 Jul 2021, at 09:57, Matthias Fischer <matthias.fischer@ipfire.org> wrote:
> 
> For details see:
> https://mmonit.com/monit/changes/
> 
>    New: Issue #979: If filesystem mount flags changed, show both old
>    and new value. Originally only the new value was reported.
> 
>    Fixed: Issue #960: The memory usage may report wrong value if system
>    memory size changed after Monit start. The problem was frequent
>    on KVM/LXC containers where MemTotal is dynamicaly updated.
> 
>    Fixed: Issue #965: Monit CLI: if a custom configuration file was
>    used with the -c option, and the file cannot be read by Monit,
>    an AssertException was thrown. Monit will report normal error
>    instead of the exception now.
> 
>    Fixed: Issue #966: Monit CLI: The service name pattern was changed
>    to case-sensitive in Monit 5.28.0. Revert the behaviour back
>    to case-insensitive.
> 
>    Fixed: Issue #971: The LINK UP and LINK DOWN tests now support short
>    form of the optional ELSE condition, in addition to the verbose ELSE
>    IF <SUCCEEDED|FAILED> form.
> 
>    Fixed: Issue #976: The space free test recovery always reported
>    value in percent, regardless of the test setting. If the test uses
>    absolute limit, Monit will report absolute space usage now.
> 
>    Fixed: Issue #986: Services checks with custom schedule (the EVERY
>    statement) did set the data collection timestamp even if the
>    monitoring was skipped in the given cycle. The timestamp is now
>    updated only when the check was performed.
> 
>    Fixed: Issue #990: Monit built with libressl may crash during
>    verification of the expired SSL certificate.
> 
>    Fixed: Issue #968: Systemd and upstart templates: templates used
>    to set the path to the configuration file in the sysconfdir, which
>    is optionally set via the configure script during the compilation.
>    The path wasn't fully expanded in the template though, so it was
>    invalid. The template doesn't specify the explicit path now and lets
>    Monit search for the configuration file in all supported locations
>    (including the sysconfdir).
> 
>    Changed: Issue #984: The permission check of the SSL PEM key file
>    allows group read permissions now (originally Monit enforced that
>    the file is readable only by the file owner).
> 
> Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
> ---
> lfs/monit | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/lfs/monit b/lfs/monit
> index 3720995cd..06306eb8f 100644
> --- a/lfs/monit
> +++ b/lfs/monit
> @@ -24,7 +24,7 @@
> 
> include Config
> 
> -VER        = 5.28.0
> +VER        = 5.28.1
> 
> THISAPP    = monit-$(VER)
> DL_FILE    = $(THISAPP).tar.gz
> @@ -32,7 +32,7 @@ DL_FROM    = $(URL_IPFIRE)
> DIR_APP    = $(DIR_SRC)/$(THISAPP)
> TARGET     = $(DIR_INFO)/$(THISAPP)
> PROG       = monit
> -PAK_VER    = 14
> +PAK_VER    = 15
> 
> DEPS       =
> 
> @@ -44,7 +44,7 @@ objects = $(DL_FILE)
> 
> $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
> 
> -$(DL_FILE)_MD5 = 778ac383dea002a5cf2330dffcc65660
> +$(DL_FILE)_MD5 = 832783145cbd523bd6bc2c36e0e5c052
> 
> install : $(TARGET)
> 
> -- 
> 2.18.0
>