[1/5] Enable correct display of ipv6 entries in Firewall log pages of web UI
mbox

Message ID 5692963D.7020607@eitelwein.net
State New
Headers show

Message

Michael Eitelwein Jan. 11, 2016, 4:34 a.m. UTC
3 main changes:
  - Fill $iface and $out from PHYSIN and PHYSOUT when looking at bridged packets, othewerwise fill from IN and OUT
  - Recognize ipv4 and ipv6 address style for $srcaddr and $dstaddr
  - Match color coding of tables to pie charts

I am using the bridged ipv6 setup as proposed in the wiki. I do not think this breaks anything when not using ipv6. So it would be nice to include this even if ipv6 is not officially supported yet. It is quite useful when using the ipv6 setup.

Signed-off-by: Michael Eitelwein <michael@eitelwein.net>

---
  html/cgi-bin/logs.cgi/firewalllog.dat            | 14 ++--
  html/cgi-bin/logs.cgi/firewalllogcountry.dat     | 43 ++++++++-----
  html/cgi-bin/logs.cgi/firewalllogip.dat          | 15 ++---
  html/cgi-bin/logs.cgi/firewalllogport.dat        | 12 ++--
  html/cgi-bin/logs.cgi/showrequestfromcountry.dat | 81 +++++++++++++++++-------
  html/cgi-bin/logs.cgi/showrequestfromip.dat      | 27 ++++----
  html/cgi-bin/logs.cgi/showrequestfromport.dat    | 14 ++--
  7 files changed, 131 insertions(+), 75 deletions(-)

Comments

Michael Tremer Jan. 22, 2016, 11:59 a.m. UTC | #1
Hi,

did you work out what the issue was with these emails?

Best,
-Michael

On Sun, 2016-01-10 at 18:34 +0100, Michael Eitelwein wrote:
> 3 main changes:
>   - Fill $iface and $out from PHYSIN and PHYSOUT when looking at
> bridged packets, othewerwise fill from IN and OUT
>   - Recognize ipv4 and ipv6 address style for $srcaddr and $dstaddr
>   - Match color coding of tables to pie charts
> 
> I am using the bridged ipv6 setup as proposed in the wiki. I do not
> think this breaks anything when not using ipv6. So it would be nice
> to include this even if ipv6 is not officially supported yet. It is
> quite useful when using the ipv6 setup.
> 
> Signed-off-by: Michael Eitelwein <michael@eitelwein.net>
> 
> ---
>   html/cgi-bin/logs.cgi/firewalllog.dat            | 14 ++--
>   html/cgi-bin/logs.cgi/firewalllogcountry.dat     | 43 ++++++++-----
>   html/cgi-bin/logs.cgi/firewalllogip.dat          | 15 ++---
>   html/cgi-bin/logs.cgi/firewalllogport.dat        | 12 ++--
>   html/cgi-bin/logs.cgi/showrequestfromcountry.dat | 81
> +++++++++++++++++-------
>   html/cgi-bin/logs.cgi/showrequestfromip.dat      | 27 ++++----
>   html/cgi-bin/logs.cgi/showrequestfromport.dat    | 14 ++--
>   7 files changed, 131 insertions(+), 75 deletions(-)
> 
> diff --git a/html/cgi-bin/logs.cgi/firewalllog.dat b/html/cgi
> -bin/logs.cgi/firewalllog.dat
> index 5a584d6..42c9612 100644
> --- a/html/cgi-bin/logs.cgi/firewalllog.dat
> +++ b/html/cgi-bin/logs.cgi/firewalllog.dat
> @@ -328,7 +328,10 @@ END
>   $lines = 0;
>   foreach $_ (@log)
>   {
> -        /^... (..) (..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/;
> +    # If ipv6 uses a bridge, PHYSIN= contains the relevant iface
> information
> +    # otherwise use IN=
> +        if ($_ =~ /^... (..) (..:..:..) [\w\-]+
> kernel:(.*)(PHYSIN=.*)$/) {}
> +        elsif ($_ =~ /^... (..) (..:..:..) [\w\-]+
> kernel:(.*)(IN=.*)$/) {}
>           my $day =  $1;
>           $day =~ tr / /0/;
>           my $time = $cgiparams{'DAY'} ? "$2" : "$day/$2" ;
> @@ -336,9 +339,12 @@ foreach $_ (@log)
>           my $packet = $4;
> 
>           my ($iface, $srcaddr, $dstaddr, $macaddr, $proto, $srcport,
> $dstport);
> -        $iface=$1   if $packet =~ /IN=(\w+)/;
> -        $srcaddr=$1 if $packet =~ /SRC=([\d\.]+)/;
> -        $dstaddr=$1 if $packet =~ /DST=([\d\.]+)/;
> +        if ($packet =~ /PHYSIN=(\w+)/) { $iface=$1 } elsif ($packet
> =~ /IN=(\w+)/) { $iface = $1}
> +        # Identify whether ipv4 or ipv6. Both are mutally exclusive.
> +        if ($packet =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) {
> $srcaddr=$1 }
> +                if ($packet =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA
> -F]{0,4})){2,7})/) { $srcaddr=$1 }
> +        if ($packet =~ /DST\=(([\d]{1,3})(\.([\d]{1,3})){3})/) {
> $dstaddr=$1 }
> +                if ($packet =~ /DST\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA
> -F]{0,4})){2,7})/) { $dstaddr=$1 }
>           $macaddr=$1 if $packet =~ /MAC=([\w+\:]+)/;
>           $proto=$1   if $packet =~ /PROTO=(\w+)/;
>           $srcport=$1 if $packet =~ /SPT=(\d+)/;
> diff --git a/html/cgi-bin/logs.cgi/firewalllogcountry.dat b/html/cgi
> -bin/logs.cgi/firewalllogcountry.dat
> index f998a62..2661ddd 100644
> --- a/html/cgi-bin/logs.cgi/firewalllogcountry.dat
> +++ b/html/cgi-bin/logs.cgi/firewalllogcountry.dat
> @@ -261,7 +261,6 @@ if( $cgiparams{'pienumber'} !=
> 0){$pienumber=$cgiparams{'pienumber'};}
>   if( $cgiparams{'otherspie'} !=
> 0){$otherspie=$cgiparams{'otherspie'};}
>   if( $cgiparams{'showpie'} != 0){$showpie=$cgiparams{'showpie'};}
>   if( $cgiparams{'sortcolumn'} !=
> 0){$sortcolumn=$cgiparams{'sortcolumn'};}
> -
>   print <<END
>   </select>
>   </td>
> @@ -294,15 +293,24 @@ $lines = 0;
> 
>   foreach $_ (@log)
>   {
> -  /^... (..) (..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/;
> +  # If ipv6 uses bridge, use PHYSIN for iface, otherwise IN
> +  if (/^... (..) (..:..:..) [\w\-]+ kernel:(.*)(PHYSIN=.*)$/) {}
> +  elsif (/^... (..) (..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/) {}
>     my $packet = $4;
> -  $packet =~ /IN=(\w+)/;       my $iface=$1; if ( $1 =~ /2./ ){
> $iface="";}
> -  $packet =~ /SRC=([\d\.]+)/;  my $srcaddr=$1;
> +  my $iface  = '';
> +  if ($packet =~ /PHYSIN=(\w+)/) { $iface = $1 } elsif ($packet =~
> /IN=(\w+)/) { $iface = $1 }
> +  if ( $1 =~ /2./ ) { $iface=''; }
> +  my $srcaddr = '';
> +  # Find ipv4 and ipv6 addresses
> +  if ($packet =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) { $srcaddr
> = $1 }
> +  elsif ($packet =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA
> -F]{0,4})){2,7})/) { $srcaddr = $1 }
> 
>     if($iface eq $red_interface) {
> +    # Traffic from red
>       if($srcaddr ne '') {
> +      # srcaddr is set
>         my $ccode = $gi->country_code_by_name($srcaddr);
> -      if( $ccode eq '') {
> +      if ($ccode eq '') {
>             $ccode = 'unknown';
>         }
>         $tabjc{$ccode} = $tabjc{$ccode} + 1 ;
> @@ -311,11 +319,16 @@ foreach $_ (@log)
>       }
>     }
>     else {
> +    # Traffic not from red
>       if($iface ne '') {
>           $tabjc{$iface} = $tabjc{$iface} + 1 ;
>           if(($tabjc{$iface} == 1) && ($lines < $pienumber)) { $lines
> = $lines + 1; }
>           $linesjc++;
>       }
> +    else {
> +      # What to do with empty iface lines?
> +      # This probably is traffic from ipfire itself (IN= OUT=XY)?
> +    }
>     }
>   }
> 
> @@ -423,7 +436,6 @@ if ($showpie != 2 && $pienumber <= 50 &&
> $pienumber != 0) {
>           print "<img src='/graphs/fwlog-country$imagerandom.png'>";
>           print "</div>";
>   }
> -
>   print <<END
>   <table width='100%' class='tbl'>
>   <tr>
> @@ -448,10 +460,8 @@ for($s=0;$s<$lines;$s++)
>     $percent = $value[$s] * 100 / $linesjc;
>     $percent = sprintf("%.f", $percent);
>     $total = $total + $value[$s];
> -  my $colorIndex = $color % 10;
> -  if($colorIndex == 0) {
> -    $colorIndex = 10;
> -  }
> +  # colors are numbered 1 to 10
> +  my $colorIndex = ($color % 10) + 1;
>     $col="bgcolor='$color{\"color$colorIndex\"}'";
>     $color++;
>     print "<tr>";
> @@ -466,8 +476,11 @@ for($s=0;$s<$lines;$s++)
>       print"<input type='hidden' name='country' value='$key[$s]'>";
>       print"<input type='submit' value='details'></form>";
>     }
> -
> -  if($key[$s] eq 'blue0' || $key[$s] eq 'green0' || $key[$s] eq
> 'orange0') {
> +  elsif ($key[$s] eq 'unknown') {
> +        print "unknown";
> +  }
> +  # Looks dangerous to use hardcoded interface names here. Probably
> needs fixing.
> +  if ($key[$s] eq 'blue0' || $key[$s] eq 'green0' || $key[$s] eq
> 'orange0' ) {
>         print "<td align='center' $col>$key[$s]</td>";
>     }
>     else {
> @@ -489,10 +502,8 @@ for($s=0;$s<$lines;$s++)
> 
>   if($cgiparams{'otherspie'} == 2 ){}
>   else{
> -  my $colorIndex = $color % 10;
> -  if($colorIndex == 0) {
> -    $colorIndex = 10;
> -  }
> +  # colors are numbered 1 to 10
> +  my $colorIndex = ($color % 10) + 1;
>     $col="bgcolor='$color{\"color$colorIndex\"}'";
>     print "<tr>";
> 
> diff --git a/html/cgi-bin/logs.cgi/firewalllogip.dat b/html/cgi
> -bin/logs.cgi/firewalllogip.dat
> index 7d82d20..6fc3422 100644
> --- a/html/cgi-bin/logs.cgi/firewalllogip.dat
> +++ b/html/cgi-bin/logs.cgi/firewalllogip.dat
> @@ -291,7 +291,8 @@ if ($pienumber == -1 || $pienumber > $lines ||
> $sortcolumn == 2) { $pienumber =
>   $lines = 0;
>   foreach $_ (@log)
>   {
> -  if($_ =~  /SRC\=([\d\.]+)/){
> +  # Extract ipv4 or ipv6 address
> +  if (($_ =~  /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($_ =~
> /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) {
>       $tabjc{$1} = $tabjc{$1} + 1 ;
>       if(($tabjc{$1} == 1) && ($lines < $pienumber)) { $lines =
> $lines + 1; }
>       $linesjc++;
> @@ -428,10 +429,8 @@ for($s=0;$s<$lines;$s++)
>     $percent = $value[$s] * 100 / $linesjc;
>     $percent = sprintf("%.f", $percent);
>     $total = $total + $value[$s];
> -  my $colorIndex = $color % 10;
> -  if($colorIndex == 0) {
> -    $colorIndex = 10;
> -  }
> +  # colors are numbered 1 to 10
> +  my $colorIndex = ($color % 10) + 1;
>     $col="bgcolor='$color{\"color$colorIndex\"}'";
>     print "<tr>";
> 
> @@ -459,10 +458,8 @@ for($s=0;$s<$lines;$s++)
> 
>   if($cgiparams{'otherspie'} == 2 ){}
>   else{
> -  my $colorIndex = $color % 10;
> -  if($colorIndex == 0) {
> -    $colorIndex = 10;
> -  }
> +  # colors are numbered 1 to 10
> +  my $colorIndex = ($color % 10) + 1;
>     $col="bgcolor='$color{\"color$colorIndex\"}'";
>     print "<tr>";
> 
> diff --git a/html/cgi-bin/logs.cgi/firewalllogport.dat b/html/cgi
> -bin/logs.cgi/firewalllogport.dat
> index 5b0db62..583c1b3 100644
> --- a/html/cgi-bin/logs.cgi/firewalllogport.dat
> +++ b/html/cgi-bin/logs.cgi/firewalllogport.dat
> @@ -429,10 +429,8 @@ for($s=0;$s<$lines;$s++)
>     $percent = $value[$s] * 100 / $linesjc;
>     $percent = sprintf("%.f", $percent);
>     $total = $total + $value[$s];
> -  my $colorIndex = $color % 10;
> -  if($colorIndex == 0) {
> -    $colorIndex = 10;
> -  }
> +  # colors are numbered 1 to 10
> +  my $colorIndex = ($color % 10) + 1;
>     $col="bgcolor='$color{\"color$colorIndex\"}'";
>     print "<tr>";
> 
> @@ -446,10 +444,8 @@ for($s=0;$s<$lines;$s++)
> 
>   if($cgiparams{'otherspie'} == 2 ){}
>   else{
> -  my $colorIndex = $color % 10;
> -  if($colorIndex == 0) {
> -    $colorIndex = 10;
> -  }
> +  # colors are numbered 1 to 10
> +  my $colorIndex = ($color % 10) + 1;
>     $col="bgcolor='$color{\"color$colorIndex\"}'";
>     print "<tr>";
> 
> diff --git a/html/cgi-bin/logs.cgi/showrequestfromcountry.dat
> b/html/cgi-bin/logs.cgi/showrequestfromcountry.dat
> index 5283c42..0784ab9 100644
> --- a/html/cgi-bin/logs.cgi/showrequestfromcountry.dat
> +++ b/html/cgi-bin/logs.cgi/showrequestfromcountry.dat
> @@ -158,23 +158,35 @@ if (!$skip)
>   {
>       while (<FILE>)
>       {
> -         if (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+
> kernel:.*(IN=.*)$/) {
> -            my $packet = $2;
> -            $packet =~ /IN=(\w+)/;       my $iface=$1; if ( $1 =~
> /2./ ){ $iface="";}
> -            $packet =~ /SRC=([\d\.]+)/;  my $srcaddr=$1;
> +      # First check whether valid log line (date, day)
> +          if (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+
> kernel:.*(IN=.*)$/) {
> +        # If ipv6 uses bridge, then use PHYSIN otherwise use IN
> +            if (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+
> kernel:.*(PHYSIN=.*)$/) {}
> +            elsif (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+
> kernel:.*(IN=.*)$/) {}
> +            my $packet  = $2;
> +            my $iface   = '';
> +            my $srcaddr = '';
> +            # If ipv6 uses bridge, use PHYSIN otherwise IN
> +            if ($packet =~ /PHYSIN=(\w+)/) { $iface = $1 } elsif
> ($packet =~ /IN=(\w+)/) { $iface = $1 }
> +            # Extract ipv4 and ipv6 addresses
> +            if (($packet =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/)
> or ($packet =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA
> -F]{0,4})){2,7})/)) {
> +              $srcaddr = $1
> +            };
> 
>               if($iface eq $country) {
> +                # iface matches country code
>                   $log[$lines] = $_;
>                   $lines++;
>               }
>               elsif($srcaddr ne '') {
> +                # or srcaddr matches country code
>                   my $ccode = $gi->country_code_by_name($srcaddr);
>                   if($ccode eq $country){
>                       $log[$lines] = $_;
>                       $lines++;
>                   }
>               }
> -        }
> +          }
>       }
>       close (FILE);
>   }
> @@ -194,16 +206,28 @@ if ($multifile) {
>           }
>           if (!$skip) {
>           while (<FILE>) {
> -             if (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+
> kernel:.*(IN=.*)$/) {
> -                if($_ =~  /SRC\=([\d\.]+)/){
> -                    my $srcaddr=$1;
> -                    my $ccode = $gi->country_code_by_name($srcaddr);
> -                    if($ccode eq $country){
> +                  # Check if valid log line (date, day)
> +           if (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+
> kernel:.*(IN=.*)$/) {
> +                    my  $iface = '';
> +                    # If ipv6 uses bridge, then use PHYSIN otherwise
> IN
> +                    if ($_ =~ /PHYSIN=(\w+)/) { $iface = $1 } elsif
> ($_ =~ /IN=(\w+)/) { $iface = $1 }
> +
> +                    if($iface eq $country) {
> +                      # iface matches country code
> +                      $log[$lines] = $_;
> +                      $lines++;
> +                    }
> +                    # extract ipv4 and ipv6 address
> +                    elsif (($_ =~
> /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($_ =~ /SRC\=(([0-9a-fA
> -F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) {
> +                      my $srcaddr=$1;
> +                      my $ccode = $gi
> ->country_code_by_name($srcaddr);
> +                      if($ccode eq $country){
> +                        # or srcaddr matches country code
>                           $log[$lines] = $_;
>                           $lines++;
> +                      }
>                       }
> -                }
> -            }
> +          }
>           }
>           close (FILE);
>       }
> @@ -308,32 +332,45 @@ $lines = 0;
>   foreach $_ (@slice)
>   {
>     $a = $_;
> -  /^... (..) (..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/;
> +  # If ipv6 uses bridge, use PHYSIN otherwise use IN
> +  if (/^... (..) (..:..:..) [\w\-]+ kernel:(.*)(PHYSIN=.*)$/) {}
> +  elsif (/^... (..) (..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/) {};
>     my $packet = $4;
> -  $packet =~ /IN=(\w+)/;       my $iface=$1; if ( $1 =~ /2./ ){
> $iface="";}
> -  $packet =~ /SRC=([\d\.]+)/;  my $srcaddr=$1;
> +  my $iface = '';
> +  # If ipv6 uses bridge, use PHYSIN otherwise use IN
> +  if ($packet =~ /PHYSIN=(\w+)/) { $iface = $1 } elsif ($packet =~
> /IN=(\w+)/) { $iface = $1 }
> +  if ( $1 =~ /2./ ){ $iface="";}
> +  my $srcaddr = '';
> +  # Extract ipv4 and ipv6 addresses
> +  if (($packet =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or
> ($packet =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/))
> {
> +    $srcaddr = $1
> +  };
> 
>     if($iface eq $country || $srcaddr ne '') {
> -    my $ccode;
> +    my $ccode='';
>       if($iface ne $country) {
>         $ccode = $gi->country_code_by_name($srcaddr);
>       }
>       if($iface eq $country || $ccode eq $country) {
> -      my $chain = '';
> +      my $chain = '';
>         my $in = '-'; my $out = '-';
>         my $srcaddr = ''; my $dstaddr = '';
>         my $protostr = '';
>         my $srcport = ''; my $dstport = '';
> 
> -      $_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/;
> +      # If ipv6 uses bridge, the use PHYSIN otherwise use IN
> +      if ($_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(PHYSIN=.*)$/) {}
> +      elsif ($_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/) {}
>         my $timestamp = $1; my $chain = $2; my $packet = $3;
>         $timestamp =~ /(...) (..) (..:..:..)/;
>         my $month = $1; my $day = $2; my $time = $3;
> 
> -      if ($a =~ /IN\=(\w+)/) { $iface = $1; }
> -      if ($a =~ /OUT\=(\w+)/) { $out = $1; }
> -      if ($a =~ /SRC\=([\d\.]+)/) { $srcaddr = $1; }
> -      if ($a =~ /DST\=([\d\.]+)/) { $dstaddr = $1; }
> +      # If ipv6 uses bridge, use PHYSIN and PHYSOUT, otherwise use
> IN and OUT
> +      if ($a =~ /PHYSIN=(\w+)/) { $iface = $1 } elsif ($a =~
> /IN=(\w+)/) { $iface = $1 }
> +      if ($a =~ /PHYSOUT=(\w+)/) { $out = $1 } elsif ($a =~
> /OUT=(\w+)/) { $out = $1 }
> +      # Extract ipv4 and ipv6 addresses
> +      if (($a =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($a =~
> /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) { $srcaddr =
> $1; }
> +      if (($a =~ /DST\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($a =~
> /DST\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) { $dstaddr =
> $1; }
>         if ($a =~ /PROTO\=(\w+)/) { $protostr = $1; }
>         my $protostrlc = lc($protostr);
>         if ($a =~  /SPT\=([\d\.]+)/){ $srcport = $1; }
> diff --git a/html/cgi-bin/logs.cgi/showrequestfromip.dat b/html/cgi
> -bin/logs.cgi/showrequestfromip.dat
> index 09a60b5..94e795c 100644
> --- a/html/cgi-bin/logs.cgi/showrequestfromip.dat
> +++ b/html/cgi-bin/logs.cgi/showrequestfromip.dat
> @@ -155,7 +155,7 @@ if (!$skip)
>           while (<FILE>)
>           {
>            if (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+
> kernel:.*(IN=.*)$/) {
> -                if($_ =~  /SRC\=([\d\.]+)/){
> +                if (($_ =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/)
> or ($_ =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) {
>                     if($1 eq $ip){
>               $log[$lines] = $_;
>               $lines++;
> @@ -182,12 +182,12 @@ if ($multifile) {
>           if (!$skip) {
>           while (<FILE>) {
>                if (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+
> kernel:.*(IN=.*)$/) {
> -                       if($_ =~  /SRC\=([\d\.]+)/){
> -                         if($1 eq $ip){
> +                          if (($_ =~
> /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($_ =~ /SRC\=(([0-9a-fA
> -F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) {
> +                            if($1 eq $ip){
>                   $log[$lines] = $_;
>                   $lines++;
> -                         }
> -                       }
> +                            }
> +                          }
>               }
>           }
>           close (FILE);
> @@ -293,7 +293,8 @@ $lines = 0;
>   foreach $_ (@slice)
>   {
>     $a = $_;
> -  if($_ =~  /SRC\=([\d\.]+)/){
> +  # Check whether valid ipv4 or ipv6 address
> +  if (($_ =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($_ =~
> /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) {
>       if($1 eq $ip){
>       my $chain = '';
>             my $in = '-'; my $out = '-';
> @@ -301,15 +302,19 @@ foreach $_ (@slice)
>       my $protostr = '';
>       my $srcport = ''; my $dstport = '';
> 
> -    $_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/;
> +    # If ipv6 uses bridge, the use PHYSIN, otherwise use IN
> +        if ($_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(PHYSIN=.*)$/)
> {}
> +        elsif ($_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/)
> {}
>       my $timestamp = $1; my $chain = $2; my $packet = $3;
>       $timestamp =~ /(...) (..) (..:..:..)/;
>       my $month = $1; my $day = $2; my $time = $3;
> 
> -    if ($a =~ /IN\=(\w+)/) { $iface = $1; }
> -    if ($a =~ /OUT\=(\w+)/) { $out = $1; }
> -    if ($a =~ /SRC\=([\d\.]+)/) { $srcaddr = $1; }
> -    if ($a =~ /DST\=([\d\.]+)/) { $dstaddr = $1; }
> +        # If ipv6 uses bridge, the use PHYSIN and PHYSOUT, otherwise
> use IN and OUT
> +        if ($a =~ /PHYSIN=(\w+)/) { $iface = $1 } elsif ($a =~
> /IN=(\w+)/) { $iface = $1 }
> +        if ($a =~ /PHYSOUT=(\w+)/) { $out = $1 } elsif ($a =~
> /OUT=(\w+)/) { $out = $1 }
> +        # Detect ipv4 and ipv6 addresses
> +    if (($a =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($a =~
> /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) { $srcaddr =
> $1; }
> +    if (($a =~ /DST\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($a =~
> /DST\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) { $dstaddr =
> $1; }
>       if ($a =~ /PROTO\=(\w+)/) { $protostr = $1; }
>       my $protostrlc = lc($protostr);
>       if ($a =~  /SPT\=([\d\.]+)/){ $srcport = $1; }
> diff --git a/html/cgi-bin/logs.cgi/showrequestfromport.dat b/html/cgi
> -bin/logs.cgi/showrequestfromport.dat
> index ad9823c..af7779a 100644
> --- a/html/cgi-bin/logs.cgi/showrequestfromport.dat
> +++ b/html/cgi-bin/logs.cgi/showrequestfromport.dat
> @@ -307,15 +307,19 @@ foreach $_ (@slice)
>       my $protostr = '';
>       my $srcport = ''; my $dstport = '';
> 
> -    $_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/;
> +        # If ipv6 uses bridge, the use PHYSIN, otherwise use IN
> +    if ($_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(PHYSIN=.*)$/) {}
> +        elsif ($_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/)
> {}
>       my $timestamp = $1; my $chain = $2; my $packet = $3;
>       $timestamp =~ /(...) (..) (..:..:..)/;
>       my $month = $1; my $day = $2; my $time = $3; my $iface;
> 
> -    if ($a =~ /IN\=(\w+)/) { $iface = $1; }
> -    if ($a =~ /OUT\=(\w+)/) { $out = $1; }
> -    if ($a =~ /SRC\=([\d\.]+)/) { $srcaddr = $1; }
> -    if ($a =~ /DST\=([\d\.]+)/) { $dstaddr = $1; }
> +        # If ipv6 uses bridge, the use PHYSIN and PHYSOUT, otherwise
> use IN and OUT
> +    if ($a =~ /PHYSIN\=(\w+)/) { $iface = $1; } elsif ($a =~
> /IN\=(\w+)/) { $iface = $1; }
> +        if ($a =~ /PHYSOUT\=(\w+)/) { $out = $1; } elsif ($a =~
> /OUT\=(\w+)/) { $out = $1; }
> +    # Detect ipv4 and ipv6 addresses
> +    if (($a =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($a =~
> /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) { $srcaddr =
> $1; }
> +    if (($a =~ /DST\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($a =~
> /DST\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) { $dstaddr =
> $1; }
>       if ($a =~ /PROTO\=(\w+)/) { $protostr = $1; }
>       my $protostrlc = lc($protostr);
>       if ($a =~  /SPT\=([\d\.]+)/){ $srcport = $1; }