htop: Update to 3.4.0

  For details see:
https://github.com/htop-dev/htop/blob/main/ChangeLog

"What's new in version 3.4.0

* More expressive version tag generated for development versions (htop --version, help screen)
* Improve Darwin support for ARM-based systems
* Fix static linking with libsystemd
* Various build fixes for DragonFlyBSD, Darwin, NetBSD, OpenBSD & Solaris
* Fix running task display (count)
* Fix sort order handling in tree mode
* Add warning when exiting with a signal (not saving .htoprc)
* Add Disk I/O and Network I/O meter for DragonFlyBSD
* Improve handling of invalid Unicode strings
* Disable basename checking for kernel tasks
* Updated documentation for pcp-htop
* Disable FOCUS_IN/FOCUS_OUT event handling
* Add GPU meter for Linux and PCP
* Add colum for GPU time per process on Linux and PCP
* Avoid glibc FILE API voodoo
* Ignore previously unhandled signals USR1 and USR2
* Force locating the config file to only use absolute paths
* Prefer reading htoprc from ~/.config/htop/htoprc over legacy ~/.htoprc
* Force writing the configuration to a regular file
* Use distinct config files for htop and pcp-htop
* Link libnl3 at runtime
* Gather permitted capabilities via capget(2)
* Avoid fetching certain process information for each thread on Linux (speed up)
* Improved handling for invalid data in /proc/tty/drivers on Linux
* Various changes to avoid memory allocations inside signal handlers
* Add single column header layout
* Fix DivByZero bug on startup on Darwin
* Include thread information on Darwin
* Show process state on Darwin
* Update compat check for C23 compilers
* Improved detail in help screen
* Unicode support for CGROUP, CCGROUP, CONTAINER and SECATTR columns
* Mark newline characters in the process command line display
* Resolve nested derived metrics for PCP
* Make supported modes/styles specific to each meter
* Refined checks for terminals supporting to redefine keys
* Fix handling of the NICE value on FreeBSD
* Fix display of CPU utilization on FreeBSD
* Honour update interval adjustments properly without restart
* Force rebuild of display table after item removals
* Reworked handling for various temperature sensors
* Fix high CPU load when the strace'd process exits prematurely
* Document --drop-capabilities to require a compile time support
* Always call PKG_PROG_PKG_CONFIG in configure
* Make configure warn when pkg.m4 is absent
* Rewrite curses/terminfo detection code in configure
* Keep following a process when resuming process updates (Z key)
* Normalize Disk I/O usage and allow utilization above 100%
* Plug several memory leaks and improve performance for information parsing
* Allow to show or hide cache and buffers in memory usage meter
* Visibility hint and UX improvements in status bar of display options panel
* Remove IOKit / IOMainPort / IOMMasterPort logic for Darwin builds
* Replace BCC with metrics from BPF for pcp-htop"

Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
---
 lfs/htop | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
  

Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>

On 11/03/2025 16:28, Matthias Fischer wrote:
> For details see:
> https://github.com/htop-dev/htop/blob/main/ChangeLog
> 
> "What's new in version 3.4.0
> 
> * More expressive version tag generated for development versions (htop --version, help screen)
> * Improve Darwin support for ARM-based systems
> * Fix static linking with libsystemd
> * Various build fixes for DragonFlyBSD, Darwin, NetBSD, OpenBSD & Solaris
> * Fix running task display (count)
> * Fix sort order handling in tree mode
> * Add warning when exiting with a signal (not saving .htoprc)
> * Add Disk I/O and Network I/O meter for DragonFlyBSD
> * Improve handling of invalid Unicode strings
> * Disable basename checking for kernel tasks
> * Updated documentation for pcp-htop
> * Disable FOCUS_IN/FOCUS_OUT event handling
> * Add GPU meter for Linux and PCP
> * Add colum for GPU time per process on Linux and PCP
> * Avoid glibc FILE API voodoo
> * Ignore previously unhandled signals USR1 and USR2
> * Force locating the config file to only use absolute paths
> * Prefer reading htoprc from ~/.config/htop/htoprc over legacy ~/.htoprc
> * Force writing the configuration to a regular file
> * Use distinct config files for htop and pcp-htop
> * Link libnl3 at runtime
> * Gather permitted capabilities via capget(2)
> * Avoid fetching certain process information for each thread on Linux (speed up)
> * Improved handling for invalid data in /proc/tty/drivers on Linux
> * Various changes to avoid memory allocations inside signal handlers
> * Add single column header layout
> * Fix DivByZero bug on startup on Darwin
> * Include thread information on Darwin
> * Show process state on Darwin
> * Update compat check for C23 compilers
> * Improved detail in help screen
> * Unicode support for CGROUP, CCGROUP, CONTAINER and SECATTR columns
> * Mark newline characters in the process command line display
> * Resolve nested derived metrics for PCP
> * Make supported modes/styles specific to each meter
> * Refined checks for terminals supporting to redefine keys
> * Fix handling of the NICE value on FreeBSD
> * Fix display of CPU utilization on FreeBSD
> * Honour update interval adjustments properly without restart
> * Force rebuild of display table after item removals
> * Reworked handling for various temperature sensors
> * Fix high CPU load when the strace'd process exits prematurely
> * Document --drop-capabilities to require a compile time support
> * Always call PKG_PROG_PKG_CONFIG in configure
> * Make configure warn when pkg.m4 is absent
> * Rewrite curses/terminfo detection code in configure
> * Keep following a process when resuming process updates (Z key)
> * Normalize Disk I/O usage and allow utilization above 100%
> * Plug several memory leaks and improve performance for information parsing
> * Allow to show or hide cache and buffers in memory usage meter
> * Visibility hint and UX improvements in status bar of display options panel
> * Remove IOKit / IOMainPort / IOMMasterPort logic for Darwin builds
> * Replace BCC with metrics from BPF for pcp-htop"
> 
> Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
> ---
>   lfs/htop | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/lfs/htop b/lfs/htop
> index d2df29082..8f5516bc9 100644
> --- a/lfs/htop
> +++ b/lfs/htop
> @@ -1,7 +1,7 @@
>   ###############################################################################
>   #                                                                             #
>   # IPFire.org - A linux based firewall                                         #
> -# Copyright (C) 2007-2024  IPFire Team  <info@ipfire.org>                     #
> +# Copyright (C) 2007-2025  IPFire Team  <info@ipfire.org>                     #
>   #                                                                             #
>   # This program is free software: you can redistribute it and/or modify        #
>   # it under the terms of the GNU General Public License as published by        #
> @@ -26,7 +26,7 @@ include Config
>   
>   SUMMARY    = An Interactive text-mode Process Viewer for Linux
>   
> -VER        = 3.3.0
> +VER        = 3.4.0
>   
>   THISAPP    = htop-$(VER)
>   DL_FILE    = $(THISAPP).tar.xz
> @@ -34,7 +34,7 @@ DL_FROM    = $(URL_IPFIRE)
>   DIR_APP    = $(DIR_SRC)/$(THISAPP)
>   TARGET     = $(DIR_INFO)/$(THISAPP)
>   PROG       = htop
> -PAK_VER    = 21
> +PAK_VER    = 22
>   
>   DEPS       =
>   
> @@ -50,7 +50,7 @@ objects = $(DL_FILE)
>   
>   $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>   
> -$(DL_FILE)_BLAKE2 = dabad4a4e973c5e0e9478e3b6cd1002369a3a3c8f152dbb72f0294ea3b8d92bbb79ab21b23ee997f2c142d5095e81706f3dfac023f27d9b3c83739754c3bf011
> +$(DL_FILE)_BLAKE2 = b7a89ae689c9da540a7509cbb90ee103f48291e0685b971f1542795b7877434e10dcc66f47bb455456cf097d40bd9342d43fd05cc4b96676d4d954a8355e4271
>   
>   install : $(TARGET)
>