[1/2] wsdd: Install wsdd - fixes bug13445

  - lfs and toorfile created for wsdd
- wsdd added to make.sh script
- created install/update/uninstall scripts for wsdd that create an unpriveleged user and
   group.
- initscript created for wsdd. As wsdd is a python3 script, when it is run as a daemon the
   pidof command does not find any pid for wsdd. So a directory/file for a pid file was
   created. This is then passed to the loadproc and killproc commands. After the loadproc
   command has been created the pid is extracted from the ps aux command and put into the
   pid file. This then works when running the killproc command for it to know what to go
   and stop. The statusproc command does not have the ability to feed in the pid from a
   pid file and so it fails to find a running wsdd as it uses the pidof command. Code was
   added to the status section of the initscript to check if the pid file exists and if so
   to print the same command as used with the statusproc command, and also the same
   wording if the pid file does not exist because wsdd is not running.
- info from the ethernet/settings file is used to identify if only green0 is available or
   if blue0 is also used and based on this the appropriate interface commands are added to
   the wsdd command.
- wsdd is also set up to run in a chroot
- Has been tested on my vm testbed, initially by editing the files on the vm clone. After
   everything confiremd to be working, the build was successfully carried out and the
   .ipfire package was copied to a new vm clone installed and shown to perform as expected.
   This test only confirms that wsdd is correctly installed and started. Shutsdown and
   restarts on reboot successfully. Confirmed from the ps aux info that wsdd has been
   started with the correct options. Thge testing can not evaluate if wsdd enables windows
   systems newer than version 7 top be able to detect the samba shares as I have no
   windows systems.

Fixes: Bug13445
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 config/rootfiles/packages/wsdd |  2 +
 lfs/wsdd                       | 89 ++++++++++++++++++++++++++++++++++
 make.sh                        |  1 +
 src/initscripts/packages/wsdd  | 63 ++++++++++++++++++++++++
 src/paks/wsdd/install.sh       | 40 +++++++++++++++
 src/paks/wsdd/uninstall.sh     | 30 ++++++++++++
 src/paks/wsdd/update.sh        | 27 +++++++++++
 7 files changed, 252 insertions(+)
 create mode 100644 config/rootfiles/packages/wsdd
 create mode 100644 lfs/wsdd
 create mode 100644 src/initscripts/packages/wsdd
 create mode 100644 src/paks/wsdd/install.sh
 create mode 100644 src/paks/wsdd/uninstall.sh
 create mode 100644 src/paks/wsdd/update.sh
  

Hi Adolf.
We have looked at your work. First of all, thank you very much. 

Your scripts seems to work fine. I will start tomorrow to test them in whole. However we have made a few changes. 

In particular, we have adapted the code to the existing code in IPFire.


Please take look at Michaels wsdd branch.
https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd



-

Daniel 




Am 10. Januar 2024 um 14:30 schrieb "Adolf Belka" <adolf.belka@ipfire.org>:



> 
> - lfs and toorfile created for wsdd
> 
> - wsdd added to make.sh script
> 
> - created install/update/uninstall scripts for wsdd that create an unpriveleged user and
> 
>  group.
> 
> - initscript created for wsdd. As wsdd is a python3 script, when it is run as a daemon the
> 
>  pidof command does not find any pid for wsdd. So a directory/file for a pid file was
> 
>  created. This is then passed to the loadproc and killproc commands. After the loadproc
> 
>  command has been created the pid is extracted from the ps aux command and put into the
> 
>  pid file. This then works when running the killproc command for it to know what to go
> 
>  and stop. The statusproc command does not have the ability to feed in the pid from a
> 
>  pid file and so it fails to find a running wsdd as it uses the pidof command. Code was
> 
>  added to the status section of the initscript to check if the pid file exists and if so
> 
>  to print the same command as used with the statusproc command, and also the same
> 
>  wording if the pid file does not exist because wsdd is not running.
> 
> - info from the ethernet/settings file is used to identify if only green0 is available or
> 
>  if blue0 is also used and based on this the appropriate interface commands are added to
> 
>  the wsdd command.
> 
> - wsdd is also set up to run in a chroot
> 
> - Has been tested on my vm testbed, initially by editing the files on the vm clone. After
> 
>  everything confiremd to be working, the build was successfully carried out and the
> 
>  .ipfire package was copied to a new vm clone installed and shown to perform as expected.
> 
>  This test only confirms that wsdd is correctly installed and started. Shutsdown and
> 
>  restarts on reboot successfully. Confirmed from the ps aux info that wsdd has been
> 
>  started with the correct options. Thge testing can not evaluate if wsdd enables windows
> 
>  systems newer than version 7 top be able to detect the samba shares as I have no
> 
>  windows systems.
> 
> Fixes: Bug13445
> 
> Tested-by: Adolf Belka <adolf.belka@ipfire.org>
> 
> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
> 
> ---
> 
>  config/rootfiles/packages/wsdd | 2 +
> 
>  lfs/wsdd | 89 ++++++++++++++++++++++++++++++++++
> 
>  make.sh | 1 +
> 
>  src/initscripts/packages/wsdd | 63 ++++++++++++++++++++++++
> 
>  src/paks/wsdd/install.sh | 40 +++++++++++++++
> 
>  src/paks/wsdd/uninstall.sh | 30 ++++++++++++
> 
>  src/paks/wsdd/update.sh | 27 +++++++++++
> 
>  7 files changed, 252 insertions(+)
> 
>  create mode 100644 config/rootfiles/packages/wsdd
> 
>  create mode 100644 lfs/wsdd
> 
>  create mode 100644 src/initscripts/packages/wsdd
> 
>  create mode 100644 src/paks/wsdd/install.sh
> 
>  create mode 100644 src/paks/wsdd/uninstall.sh
> 
>  create mode 100644 src/paks/wsdd/update.sh
> 
> diff --git a/config/rootfiles/packages/wsdd b/config/rootfiles/packages/wsdd
> 
> new file mode 100644
> 
> index 000000000..ce225043a
> 
> --- /dev/null
> 
> +++ b/config/rootfiles/packages/wsdd
> 
> @@ -0,0 +1,2 @@
> 
> +etc/rc.d/init.d/wsdd
> 
> +usr/bin/wsdd
> 
> diff --git a/lfs/wsdd b/lfs/wsdd
> 
> new file mode 100644
> 
> index 000000000..aa65e47ef
> 
> --- /dev/null
> 
> +++ b/lfs/wsdd
> 
> @@ -0,0 +1,89 @@
> 
> +###############################################################################
> 
> +# #
> 
> +# IPFire.org - A linux based firewall #
> 
> +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org> #
> 
> +# #
> 
> +# This program is free software: you can redistribute it and/or modify #
> 
> +# it under the terms of the GNU General Public License as published by #
> 
> +# the Free Software Foundation, either version 3 of the License, or #
> 
> +# (at your option) any later version. #
> 
> +# #
> 
> +# This program is distributed in the hope that it will be useful, #
> 
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
> +# GNU General Public License for more details. #
> 
> +# #
> 
> +# You should have received a copy of the GNU General Public License #
> 
> +# along with this program. If not, see <http://www.gnu.org/licenses/> http://www.gnu.org/licenses/%3E . #
> 
> +# #
> 
> +###############################################################################
> 
> +
> 
> +###############################################################################
> 
> +# Definitions
> 
> +###############################################################################
> 
> +
> 
> +include Config
> 
> +
> 
> +VER = 0.7.1
> 
> +SUMMARY = A Web Service Discovery host daemon.
> 
> +
> 
> +THISAPP = wsdd-$(VER)
> 
> +DL_FILE = $(THISAPP).tar.gz
> 
> +DL_FROM = $(URL_IPFIRE)
> 
> +DIR_APP = $(DIR_SRC)/$(THISAPP)
> 
> +TARGET = $(DIR_INFO)/$(THISAPP)
> 
> +PROG = wsdd
> 
> +PAK_VER = 1
> 
> +
> 
> +DEPS =
> 
> +
> 
> +SERVICES = wsdd
> 
> +
> 
> +###############################################################################
> 
> +# Top-level Rules
> 
> +###############################################################################
> 
> +
> 
> +objects = $(DL_FILE)
> 
> +
> 
> +$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
> 
> +
> 
> +$(DL_FILE)_BLAKE2 = ce43022c3bd9f7ff1fd7169ac0d5ab6b2ff78d35c221c05b2e20908a5772d563ab2aca571d4e6ae48a55d19d4adcb9cde60f720ae47af8ee950198224fcfdb26
> 
> +
> 
> +install : $(TARGET)
> 
> +
> 
> +check : $(patsubst %,$(DIR_CHK)/%,$(objects))
> 
> +
> 
> +download :$(patsubst %,$(DIR_DL)/%,$(objects))
> 
> +
> 
> +b2 : $(subst %,%_BLAKE2,$(objects))
> 
> +
> 
> +dist:
> 
> + @$(PAK)
> 
> +
> 
> +###############################################################################
> 
> +# Downloading, checking, b2sum
> 
> +###############################################################################
> 
> +
> 
> +$(patsubst %,$(DIR_CHK)/%,$(objects)) :
> 
> + @$(CHECK)
> 
> +
> 
> +$(patsubst %,$(DIR_DL)/%,$(objects)) :
> 
> + @$(LOAD)
> 
> +
> 
> +$(subst %,%_BLAKE2,$(objects)) :
> 
> + @$(B2SUM)
> 
> +
> 
> +###############################################################################
> 
> +# Installation Details
> 
> +###############################################################################
> 
> +
> 
> +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
> 
> + @$(PREBUILD)
> 
> + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
> 
> + cd $(DIR_APP) && cp src/wsdd.py /usr/bin/wsdd
> 
> +
> 
> + #install initscripts
> 
> + $(call INSTALL_INITSCRIPTS,$(SERVICES))
> 
> +
> 
> + @rm -rf $(DIR_APP)
> 
> + @$(POSTBUILD)
> 
> diff --git a/make.sh b/make.sh
> 
> index 06e09c9a3..5af3dedc3 100755
> 
> --- a/make.sh
> 
> +++ b/make.sh
> 
> @@ -1699,6 +1699,7 @@ buildipfire() {
> 
>  lfsmake2 perl-MIME-Base32
> 
>  lfsmake2 perl-URI-Encode
> 
>  lfsmake2 rsnapshot
> 
> + lfsmake2 wsdd
> 
>  
> 
>  # Kernelbuild ... current we have no platform that need
> 
>  # multi kernel builds so KCFG is empty
> 
> diff --git a/src/initscripts/packages/wsdd b/src/initscripts/packages/wsdd
> 
> new file mode 100644
> 
> index 000000000..c5207f872
> 
> --- /dev/null
> 
> +++ b/src/initscripts/packages/wsdd
> 
> @@ -0,0 +1,63 @@
> 
> +#!/bin/sh
> 
> +###############################################################################
> 
> +# #
> 
> +# IPFire.org - A linux based firewall #
> 
> +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org> #
> 
> +# #
> 
> +# This program is free software: you can redistribute it and/or modify #
> 
> +# it under the terms of the GNU General Public License as published by #
> 
> +# the Free Software Foundation, either version 3 of the License, or #
> 
> +# (at your option) any later version. #
> 
> +# #
> 
> +# This program is distributed in the hope that it will be useful, #
> 
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
> +# GNU General Public License for more details. #
> 
> +# #
> 
> +# You should have received a copy of the GNU General Public License #
> 
> +# along with this program. If not, see <http://www.gnu.org/licenses/> http://www.gnu.org/licenses/%3E . #
> 
> +# #
> 
> +###############################################################################
> 
> +
> 
> +. /etc/sysconfig/rc
> 
> +. $rc_functions
> 
> +
> 
> +eval $(/usr/local/bin/readhash /var/ipfire/ethernet/settings)
> 
> +
> 
> +# Create chroot directory for wsdd
> 
> +mkdir -p /var/run/wsdd
> 
> +
> 
> +INTERFACES="-i ${GREEN_DEV}"
> 
> + if [ -n "${BLUE_DEV}" ]; then
> 
> + INTERFACES="${INTERFACES} -i ${BLUE_DEV}"
> 
> + fi
> 
> +WSDD_WORKGROUP="-w $(/usr/bin/testparm -s --parameter-name workgroup 2>/dev/null)"
> 
> +WSDD_USER="-u wsdd:wsdd"
> 
> +WSDD_CHROOT="-c /var/run/wsdd"
> 
> +
> 
> +case "$1" in
> 
> + start)
> 
> + boot_mesg "Starting wsdd daemon..."
> 
> + loadproc -b /usr/bin/wsdd -4 ${WSDD_USER} ${INTERFACES} ${WSDD_WORKGROUP} ${WSDD_CHROOT}
> 
> + sleep 1
> 
> + echo $(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk '{print $2}') > /var/run/wsdd/pid
> 
> + ;;
> 
> + stop)
> 
> + boot_mesg "Stopping wsdd daemon..."
> 
> + killproc -p /var/run/wsdd/pid /usr/bin/wsdd
> 
> + ;;
> 
> + status)
> 
> + WSDD_PID=$(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk '{print $2}')
> 
> + if [ -n "${WSDD_PID}" ]; then
> 
> + echo -e "\\033[1;36m /usr/bin/wsdd is running with Process"\
> 
> + "ID(s) $WSDD_PID.\\033[0;39m"
> 
> + else
> 
> + echo -e "\\033[1;36m /usr/bin/wsdd is not running.\\033[0;39m"
> 
> + fi
> 
> + ;;
> 
> + *)
> 
> + echo "Usage: $0 (start|stop|status)"
> 
> + exit 1
> 
> + ;;
> 
> +esac
> 
> +
> 
> diff --git a/src/paks/wsdd/install.sh b/src/paks/wsdd/install.sh
> 
> new file mode 100644
> 
> index 000000000..181b84eb9
> 
> --- /dev/null
> 
> +++ b/src/paks/wsdd/install.sh
> 
> @@ -0,0 +1,40 @@
> 
> +#!/bin/bash
> 
> +############################################################################
> 
> +# #
> 
> +# This file is part of the IPFire Firewall. #
> 
> +# #
> 
> +# IPFire is free software; you can redistribute it and/or modify #
> 
> +# it under the terms of the GNU General Public License as published by #
> 
> +# the Free Software Foundation; either version 2 of the License, or #
> 
> +# (at your option) any later version. #
> 
> +# #
> 
> +# IPFire is distributed in the hope that it will be useful, #
> 
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
> +# GNU General Public License for more details. #
> 
> +# #
> 
> +# You should have received a copy of the GNU General Public License #
> 
> +# along with IPFire; if not, write to the Free Software #
> 
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA #
> 
> +# #
> 
> +# Copyright (C) 2007 IPFire-Team <info@ipfire.org>. #
> 
> +# #
> 
> +############################################################################
> 
> +#
> 
> +. /opt/pakfire/lib/functions.sh
> 
> +
> 
> +# If the wsdd user does not exist yet, then create it and add to wsdd group.
> 
> +if ! getent user wsdd >/dev/null; then
> 
> + useradd -r -U -d / -s /bin/false -c "wsdd user" wsdd
> 
> + usermod -a -G wsdd wsdd
> 
> +fi
> 
> +
> 
> +extract_files
> 
> +restore_backup ${NAME}
> 
> +
> 
> +# Create startlinks
> 
> +ln -sf ../init.d/wsdd /etc/rc.d/rc0.d/K35wsdd
> 
> +ln -sf ../init.d/wsdd /etc/rc.d/rc3.d/S65wsdd
> 
> +ln -sf ../init.d/wsdd /etc/rc.d/rc6.d/K35wsdd
> 
> +start_service ${NAME}
> 
> +exit 0
> 
> diff --git a/src/paks/wsdd/uninstall.sh b/src/paks/wsdd/uninstall.sh
> 
> new file mode 100644
> 
> index 000000000..4c52ee281
> 
> --- /dev/null
> 
> +++ b/src/paks/wsdd/uninstall.sh
> 
> @@ -0,0 +1,30 @@
> 
> +#!/bin/bash
> 
> +############################################################################
> 
> +# #
> 
> +# This file is part of the IPFire Firewall. #
> 
> +# #
> 
> +# IPFire is free software; you can redistribute it and/or modify #
> 
> +# it under the terms of the GNU General Public License as published by #
> 
> +# the Free Software Foundation; either version 2 of the License, or #
> 
> +# (at your option) any later version. #
> 
> +# #
> 
> +# IPFire is distributed in the hope that it will be useful, #
> 
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
> +# GNU General Public License for more details. #
> 
> +# #
> 
> +# You should have received a copy of the GNU General Public License #
> 
> +# along with IPFire; if not, write to the Free Software #
> 
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA #
> 
> +# #
> 
> +# Copyright (C) 2007 IPFire-Team <info@ipfire.org>. #
> 
> +# #
> 
> +############################################################################
> 
> +#
> 
> +. /opt/pakfire/lib/functions.sh
> 
> +stop_service ${NAME}
> 
> +make_backup ${NAME}
> 
> +remove_files
> 
> +# Remove all start links.
> 
> +rm -rf /etc/rc.d/rc*.d/*wsdd
> 
> +exit 0
> 
> diff --git a/src/paks/wsdd/update.sh b/src/paks/wsdd/update.sh
> 
> new file mode 100644
> 
> index 000000000..99776659c
> 
> --- /dev/null
> 
> +++ b/src/paks/wsdd/update.sh
> 
> @@ -0,0 +1,27 @@
> 
> +#!/bin/bash
> 
> +############################################################################
> 
> +# #
> 
> +# This file is part of the IPFire Firewall. #
> 
> +# #
> 
> +# IPFire is free software; you can redistribute it and/or modify #
> 
> +# it under the terms of the GNU General Public License as published by #
> 
> +# the Free Software Foundation; either version 2 of the License, or #
> 
> +# (at your option) any later version. #
> 
> +# #
> 
> +# IPFire is distributed in the hope that it will be useful, #
> 
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
> +# GNU General Public License for more details. #
> 
> +# #
> 
> +# You should have received a copy of the GNU General Public License #
> 
> +# along with IPFire; if not, write to the Free Software #
> 
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA #
> 
> +# #
> 
> +# Copyright (C) 2007-2020 IPFire-Team <info@ipfire.org>. #
> 
> +# #
> 
> +############################################################################
> 
> +#
> 
> +. /opt/pakfire/lib/functions.sh
> 
> +extract_backup_includes
> 
> +./uninstall.sh
> 
> +./install.sh
> 
> -- 
> 
> 2.43.0
>
  

Hi Daniel,

On 11/01/2024 17:11, daniel.weismueller@ipfire.org wrote:
> Hi Adolf.
> We have looked at your work. First of all, thank you very much.
> 
> Your scripts seems to work fine. I will start tomorrow to test them in 
> whole. However we have made a few changes.
> 
> In particular, we have adapted the code to the existing code in IPFire.
> 
> Please take look at Michaels wsdd branch.
> https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd>

That looks very good. I clearly still have a bit to learn about how to 
code in a more tidy manner.

I also see that Michael fixed the pid fault in the 
loadproc/statusproc/killproc while I just created a workaround solution 
for the wsdd initscript alone.
I did have a look at the code in the functions file but struggled to 
understand it enough to be able to figure out what was giving the 
problem I was experiencing.

I am glad that has been sorted and the initscript tidied up in line with 
IPFire coding style.

Will try and remember that in future.

Regards,
Adolf.

> 
> -
> 
> 
> Daniel
> 
> Am 10. Januar 2024 um 14:30 schrieb "Adolf Belka" 
> <adolf.belka@ipfire.org 
> <mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf.belka%40ipfire.org%3E>>:
> 
>     - lfs and toorfile created for wsdd
> 
>     - wsdd added to make.sh script
> 
>     - created install/update/uninstall scripts for wsdd that create an
>     unpriveleged user and
> 
>     group.
> 
>     - initscript created for wsdd. As wsdd is a python3 script, when it
>     is run as a daemon the
> 
>     pidof command does not find any pid for wsdd. So a directory/file
>     for a pid file was
> 
>     created. This is then passed to the loadproc and killproc commands.
>     After the loadproc
> 
>     command has been created the pid is extracted from the ps aux
>     command and put into the
> 
>     pid file. This then works when running the killproc command for it
>     to know what to go
> 
>     and stop. The statusproc command does not have the ability to feed
>     in the pid from a
> 
>     pid file and so it fails to find a running wsdd as it uses the pidof
>     command. Code was
> 
>     added to the status section of the initscript to check if the pid
>     file exists and if so
> 
>     to print the same command as used with the statusproc command, and
>     also the same
> 
>     wording if the pid file does not exist because wsdd is not running.
> 
>     - info from the ethernet/settings file is used to identify if only
>     green0 is available or
> 
>     if blue0 is also used and based on this the appropriate interface
>     commands are added to
> 
>     the wsdd command.
> 
>     - wsdd is also set up to run in a chroot
> 
>     - Has been tested on my vm testbed, initially by editing the files
>     on the vm clone. After
> 
>     everything confiremd to be working, the build was successfully
>     carried out and the
> 
>     .ipfire package was copied to a new vm clone installed and shown to
>     perform as expected.
> 
>     This test only confirms that wsdd is correctly installed and
>     started. Shutsdown and
> 
>     restarts on reboot successfully. Confirmed from the ps aux info that
>     wsdd has been
> 
>     started with the correct options. Thge testing can not evaluate if
>     wsdd enables windows
> 
>     systems newer than version 7 top be able to detect the samba shares
>     as I have no
> 
>     windows systems.
> 
> 
>     Fixes: Bug13445
> 
>     Tested-by: Adolf Belka <adolf.belka@ipfire.org>
> 
>     Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
> 
>     ---
> 
>     config/rootfiles/packages/wsdd | 2 +
> 
>     lfs/wsdd | 89 ++++++++++++++++++++++++++++++++++
> 
>     make.sh | 1 +
> 
>     src/initscripts/packages/wsdd | 63 ++++++++++++++++++++++++
> 
>     src/paks/wsdd/install.sh | 40 +++++++++++++++
> 
>     src/paks/wsdd/uninstall.sh | 30 ++++++++++++
> 
>     src/paks/wsdd/update.sh | 27 +++++++++++
> 
>     7 files changed, 252 insertions(+)
> 
>     create mode 100644 config/rootfiles/packages/wsdd
> 
>     create mode 100644 lfs/wsdd
> 
>     create mode 100644 src/initscripts/packages/wsdd
> 
>     create mode 100644 src/paks/wsdd/install.sh
> 
>     create mode 100644 src/paks/wsdd/uninstall.sh
> 
>     create mode 100644 src/paks/wsdd/update.sh
> 
> 
>     diff --git a/config/rootfiles/packages/wsdd
>     b/config/rootfiles/packages/wsdd
> 
>     new file mode 100644
> 
>     index 000000000..ce225043a
> 
>     --- /dev/null
> 
>     +++ b/config/rootfiles/packages/wsdd
> 
>     @@ -0,0 +1,2 @@
> 
>     +etc/rc.d/init.d/wsdd
> 
>     +usr/bin/wsdd
> 
>     diff --git a/lfs/wsdd b/lfs/wsdd
> 
>     new file mode 100644
> 
>     index 000000000..aa65e47ef
> 
>     --- /dev/null
> 
>     +++ b/lfs/wsdd
> 
>     @@ -0,0 +1,89 @@
> 
>     +###############################################################################
> 
>     +# #
> 
>     +# IPFire.org - A linux based firewall #
> 
>     +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org> #
> 
>     +# #
> 
>     +# This program is free software: you can redistribute it and/or
>     modify #
> 
>     +# it under the terms of the GNU General Public License as published
>     by #
> 
>     +# the Free Software Foundation, either version 3 of the License, or #
> 
>     +# (at your option) any later version. #
> 
>     +# #
> 
>     +# This program is distributed in the hope that it will be useful, #
> 
>     +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
>     +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
>     +# GNU General Public License for more details. #
> 
>     +# #
> 
>     +# You should have received a copy of the GNU General Public License #
> 
>     +# along with this program. If not, see
>     <http://www.gnu.org/licenses/> <http://www.gnu.org/licenses/>>. #
> 
>     +# #
> 
>     +###############################################################################
> 
>     +
> 
>     +###############################################################################
> 
>     +# Definitions
> 
>     +###############################################################################
> 
>     +
> 
>     +include Config
> 
>     +
> 
>     +VER = 0.7.1
> 
>     +SUMMARY = A Web Service Discovery host daemon.
> 
>     +
> 
>     +THISAPP = wsdd-$(VER)
> 
>     +DL_FILE = $(THISAPP).tar.gz
> 
>     +DL_FROM = $(URL_IPFIRE)
> 
>     +DIR_APP = $(DIR_SRC)/$(THISAPP)
> 
>     +TARGET = $(DIR_INFO)/$(THISAPP)
> 
>     +PROG = wsdd
> 
>     +PAK_VER = 1
> 
>     +
> 
>     +DEPS =
> 
>     +
> 
>     +SERVICES = wsdd
> 
>     +
> 
>     +###############################################################################
> 
>     +# Top-level Rules
> 
>     +###############################################################################
> 
>     +
> 
>     +objects = $(DL_FILE)
> 
>     +
> 
>     +$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
> 
>     +
> 
>     +$(DL_FILE)_BLAKE2 =
>     ce43022c3bd9f7ff1fd7169ac0d5ab6b2ff78d35c221c05b2e20908a5772d563ab2aca571d4e6ae48a55d19d4adcb9cde60f720ae47af8ee950198224fcfdb26
> 
>     +
> 
>     +install : $(TARGET)
> 
>     +
> 
>     +check : $(patsubst %,$(DIR_CHK)/%,$(objects))
> 
>     +
> 
>     +download :$(patsubst %,$(DIR_DL)/%,$(objects))
> 
>     +
> 
>     +b2 : $(subst %,%_BLAKE2,$(objects))
> 
>     +
> 
>     +dist:
> 
>     + @$(PAK)
> 
>     +
> 
>     +###############################################################################
> 
>     +# Downloading, checking, b2sum
> 
>     +###############################################################################
> 
>     +
> 
>     +$(patsubst %,$(DIR_CHK)/%,$(objects)) :
> 
>     + @$(CHECK)
> 
>     +
> 
>     +$(patsubst %,$(DIR_DL)/%,$(objects)) :
> 
>     + @$(LOAD)
> 
>     +
> 
>     +$(subst %,%_BLAKE2,$(objects)) :
> 
>     + @$(B2SUM)
> 
>     +
> 
>     +###############################################################################
> 
>     +# Installation Details
> 
>     +###############################################################################
> 
>     +
> 
>     +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
> 
>     + @$(PREBUILD)
> 
>     + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
> 
>     + cd $(DIR_APP) && cp src/wsdd.py /usr/bin/wsdd
> 
>     +
> 
>     + #install initscripts
> 
>     + $(call INSTALL_INITSCRIPTS,$(SERVICES))
> 
>     +
> 
>     + @rm -rf $(DIR_APP)
> 
>     + @$(POSTBUILD)
> 
>     diff --git a/make.sh b/make.sh
> 
>     index 06e09c9a3..5af3dedc3 100755
> 
>     --- a/make.sh
> 
>     +++ b/make.sh
> 
>     @@ -1699,6 +1699,7 @@ buildipfire() {
> 
>     lfsmake2 perl-MIME-Base32
> 
>     lfsmake2 perl-URI-Encode
> 
>     lfsmake2 rsnapshot
> 
>     + lfsmake2 wsdd
> 
> 
>     # Kernelbuild ... current we have no platform that need
> 
>     # multi kernel builds so KCFG is empty
> 
>     diff --git a/src/initscripts/packages/wsdd
>     b/src/initscripts/packages/wsdd
> 
>     new file mode 100644
> 
>     index 000000000..c5207f872
> 
>     --- /dev/null
> 
>     +++ b/src/initscripts/packages/wsdd
> 
>     @@ -0,0 +1,63 @@
> 
>     +#!/bin/sh
> 
>     +###############################################################################
> 
>     +# #
> 
>     +# IPFire.org - A linux based firewall #
> 
>     +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org> #
> 
>     +# #
> 
>     +# This program is free software: you can redistribute it and/or
>     modify #
> 
>     +# it under the terms of the GNU General Public License as published
>     by #
> 
>     +# the Free Software Foundation, either version 3 of the License, or #
> 
>     +# (at your option) any later version. #
> 
>     +# #
> 
>     +# This program is distributed in the hope that it will be useful, #
> 
>     +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
>     +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
>     +# GNU General Public License for more details. #
> 
>     +# #
> 
>     +# You should have received a copy of the GNU General Public License #
> 
>     +# along with this program. If not, see
>     <http://www.gnu.org/licenses/> <http://www.gnu.org/licenses/>>. #
> 
>     +# #
> 
>     +###############################################################################
> 
>     +
> 
>     +. /etc/sysconfig/rc
> 
>     +. $rc_functions
> 
>     +
> 
>     +eval $(/usr/local/bin/readhash /var/ipfire/ethernet/settings)
> 
>     +
> 
>     +# Create chroot directory for wsdd
> 
>     +mkdir -p /var/run/wsdd
> 
>     +
> 
>     +INTERFACES="-i ${GREEN_DEV}"
> 
>     + if [ -n "${BLUE_DEV}" ]; then
> 
>     + INTERFACES="${INTERFACES} -i ${BLUE_DEV}"
> 
>     + fi
> 
>     +WSDD_WORKGROUP="-w $(/usr/bin/testparm -s --parameter-name
>     workgroup 2>/dev/null)"
> 
>     +WSDD_USER="-u wsdd:wsdd"
> 
>     +WSDD_CHROOT="-c /var/run/wsdd"
> 
>     +
> 
>     +case "$1" in
> 
>     + start)
> 
>     + boot_mesg "Starting wsdd daemon..."
> 
>     + loadproc -b /usr/bin/wsdd -4 ${WSDD_USER} ${INTERFACES}
>     ${WSDD_WORKGROUP} ${WSDD_CHROOT}
> 
>     + sleep 1
> 
>     + echo $(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk '{print
>     $2}') > /var/run/wsdd/pid
> 
>     + ;;
> 
>     + stop)
> 
>     + boot_mesg "Stopping wsdd daemon..."
> 
>     + killproc -p /var/run/wsdd/pid /usr/bin/wsdd
> 
>     + ;;
> 
>     + status)
> 
>     + WSDD_PID=$(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk
>     '{print $2}')
> 
>     + if [ -n "${WSDD_PID}" ]; then
> 
>     + echo -e "\\033[1;36m /usr/bin/wsdd is running with Process"\
> 
>     + "ID(s) $WSDD_PID.\\033[0;39m"
> 
>     + else
> 
>     + echo -e "\\033[1;36m /usr/bin/wsdd is not running.\\033[0;39m"
> 
>     + fi
> 
>     + ;;
> 
>     + *)
> 
>     + echo "Usage: $0 (start|stop|status)"
> 
>     + exit 1
> 
>     + ;;
> 
>     +esac
> 
>     +
> 
>     diff --git a/src/paks/wsdd/install.sh b/src/paks/wsdd/install.sh
> 
>     new file mode 100644
> 
>     index 000000000..181b84eb9
> 
>     --- /dev/null
> 
>     +++ b/src/paks/wsdd/install.sh
> 
>     @@ -0,0 +1,40 @@
> 
>     +#!/bin/bash
> 
>     +############################################################################
> 
>     +# #
> 
>     +# This file is part of the IPFire Firewall. #
> 
>     +# #
> 
>     +# IPFire is free software; you can redistribute it and/or modify #
> 
>     +# it under the terms of the GNU General Public License as published
>     by #
> 
>     +# the Free Software Foundation; either version 2 of the License, or #
> 
>     +# (at your option) any later version. #
> 
>     +# #
> 
>     +# IPFire is distributed in the hope that it will be useful, #
> 
>     +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
>     +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
>     +# GNU General Public License for more details. #
> 
>     +# #
> 
>     +# You should have received a copy of the GNU General Public License #
> 
>     +# along with IPFire; if not, write to the Free Software #
> 
>     +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>     02111-1307 USA #
> 
>     +# #
> 
>     +# Copyright (C) 2007 IPFire-Team <info@ipfire.org>. #
> 
>     +# #
> 
>     +############################################################################
> 
>     +#
> 
>     +. /opt/pakfire/lib/functions.sh
> 
>     +
> 
>     +# If the wsdd user does not exist yet, then create it and add to
>     wsdd group.
> 
>     +if ! getent user wsdd >/dev/null; then
> 
>     + useradd -r -U -d / -s /bin/false -c "wsdd user" wsdd
> 
>     + usermod -a -G wsdd wsdd
> 
>     +fi
> 
>     +
> 
>     +extract_files
> 
>     +restore_backup ${NAME}
> 
>     +
> 
>     +# Create startlinks
> 
>     +ln -sf ../init.d/wsdd /etc/rc.d/rc0.d/K35wsdd
> 
>     +ln -sf ../init.d/wsdd /etc/rc.d/rc3.d/S65wsdd
> 
>     +ln -sf ../init.d/wsdd /etc/rc.d/rc6.d/K35wsdd
> 
>     +start_service ${NAME}
> 
>     +exit 0
> 
>     diff --git a/src/paks/wsdd/uninstall.sh b/src/paks/wsdd/uninstall.sh
> 
>     new file mode 100644
> 
>     index 000000000..4c52ee281
> 
>     --- /dev/null
> 
>     +++ b/src/paks/wsdd/uninstall.sh
> 
>     @@ -0,0 +1,30 @@
> 
>     +#!/bin/bash
> 
>     +############################################################################
> 
>     +# #
> 
>     +# This file is part of the IPFire Firewall. #
> 
>     +# #
> 
>     +# IPFire is free software; you can redistribute it and/or modify #
> 
>     +# it under the terms of the GNU General Public License as published
>     by #
> 
>     +# the Free Software Foundation; either version 2 of the License, or #
> 
>     +# (at your option) any later version. #
> 
>     +# #
> 
>     +# IPFire is distributed in the hope that it will be useful, #
> 
>     +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
>     +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
>     +# GNU General Public License for more details. #
> 
>     +# #
> 
>     +# You should have received a copy of the GNU General Public License #
> 
>     +# along with IPFire; if not, write to the Free Software #
> 
>     +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>     02111-1307 USA #
> 
>     +# #
> 
>     +# Copyright (C) 2007 IPFire-Team <info@ipfire.org>. #
> 
>     +# #
> 
>     +############################################################################
> 
>     +#
> 
>     +. /opt/pakfire/lib/functions.sh
> 
>     +stop_service ${NAME}
> 
>     +make_backup ${NAME}
> 
>     +remove_files
> 
>     +# Remove all start links.
> 
>     +rm -rf /etc/rc.d/rc*.d/*wsdd
> 
>     +exit 0
> 
>     diff --git a/src/paks/wsdd/update.sh b/src/paks/wsdd/update.sh
> 
>     new file mode 100644
> 
>     index 000000000..99776659c
> 
>     --- /dev/null
> 
>     +++ b/src/paks/wsdd/update.sh
> 
>     @@ -0,0 +1,27 @@
> 
>     +#!/bin/bash
> 
>     +############################################################################
> 
>     +# #
> 
>     +# This file is part of the IPFire Firewall. #
> 
>     +# #
> 
>     +# IPFire is free software; you can redistribute it and/or modify #
> 
>     +# it under the terms of the GNU General Public License as published
>     by #
> 
>     +# the Free Software Foundation; either version 2 of the License, or #
> 
>     +# (at your option) any later version. #
> 
>     +# #
> 
>     +# IPFire is distributed in the hope that it will be useful, #
> 
>     +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
>     +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
>     +# GNU General Public License for more details. #
> 
>     +# #
> 
>     +# You should have received a copy of the GNU General Public License #
> 
>     +# along with IPFire; if not, write to the Free Software #
> 
>     +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>     02111-1307 USA #
> 
>     +# #
> 
>     +# Copyright (C) 2007-2020 IPFire-Team <info@ipfire.org>. #
> 
>     +# #
> 
>     +############################################################################
> 
>     +#
> 
>     +. /opt/pakfire/lib/functions.sh
> 
>     +extract_backup_includes
> 
>     +./uninstall.sh
> 
>     +./install.sh
> 
>     -- 
> 
>     2.43.0
> 
>
  

Hello,

> On 12 Jan 2024, at 11:14, Adolf Belka <adolf.belka@ipfire.org> wrote:
> 
> Hi Daniel,
> 
> On 11/01/2024 17:11, daniel.weismueller@ipfire.org wrote:
>> Hi Adolf.
>> We have looked at your work. First of all, thank you very much.
>> Your scripts seems to work fine. I will start tomorrow to test them in whole. However we have made a few changes.
>> In particular, we have adapted the code to the existing code in IPFire.
>> Please take look at Michaels wsdd branch.
>> https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd>
> 
> That looks very good. I clearly still have a bit to learn about how to code in a more tidy manner.

It worked… I was just in the swing of it :)

> I also see that Michael fixed the pid fault in the loadproc/statusproc/killproc while I just created a workaround solution for the wsdd initscript alone.

loadproc/statusproc/killproc are really difficult to handle. They are supposed to be LSB-conformant functions, but I believe that it never really happened that they because universally used and compatible between distributions. Now with systemd, there is no more need…

And it is also because of systemd that daemons behave differently now - actually not even like daemons whatsoever any more. They used to fork themselves into the background which made all the PID processing necessary, because the init script could not know the PID of the process forked in the background. Now, they don’t do this any more because without the fork, things are easier for systemd to manage.

The new -b switch that was added some while ago is already helping us to launch such new processes into the background, but we don’t have PID files any more. And since scripts don’t work with statusproc/killproc, I thought it might be a good idea to add this to loadproc as I am expecting us to need this more often in the future.

And while I was thinking about the problem, I figured it would be easier to send a patch for those few lines instead of explaining it in words - which probably would have been a little bit longer.

The only noteworthy thing is that there was a potential security issue in passing around the shell arguments as strings because the workgroup variable could have been almost anything. I am not sure what validation samba would do, but I thought it would be best not to rely on that. A two words (with a space) workgroup would have caused wsdd not to start, because it would have seen a command line like “—-workgroup ABC DEF” with ABC being interpreted as the workgroup and DEF being some garbage that wsdd would not understand. The trick with the array is that it would pass the arguments like this “—-workgroup ‘ABC DEF’” which prevents that “DEF” would be interpreted as an extra parameter.

So, everything is fine :) Especially after I added the “restart” command :)

> I did have a look at the code in the functions file but struggled to understand it enough to be able to figure out what was giving the problem I was experiencing.

Which functions?

> I am glad that has been sorted and the initscript tidied up in line with IPFire coding style.

That is why we are all working together...

> Will try and remember that in future.

If not, we are here to help :)

-Michael

> Regards,
> Adolf.
> 
>> -
>> Daniel
>> Am 10. Januar 2024 um 14:30 schrieb "Adolf Belka" <adolf.belka@ipfire.org <mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf.belka%40ipfire.org%3E>>:
>>    - lfs and toorfile created for wsdd
>>    - wsdd added to make.sh script
>>    - created install/update/uninstall scripts for wsdd that create an
>>    unpriveleged user and
>>    group.
>>    - initscript created for wsdd. As wsdd is a python3 script, when it
>>    is run as a daemon the
>>    pidof command does not find any pid for wsdd. So a directory/file
>>    for a pid file was
>>    created. This is then passed to the loadproc and killproc commands.
>>    After the loadproc
>>    command has been created the pid is extracted from the ps aux
>>    command and put into the
>>    pid file. This then works when running the killproc command for it
>>    to know what to go
>>    and stop. The statusproc command does not have the ability to feed
>>    in the pid from a
>>    pid file and so it fails to find a running wsdd as it uses the pidof
>>    command. Code was
>>    added to the status section of the initscript to check if the pid
>>    file exists and if so
>>    to print the same command as used with the statusproc command, and
>>    also the same
>>    wording if the pid file does not exist because wsdd is not running.
>>    - info from the ethernet/settings file is used to identify if only
>>    green0 is available or
>>    if blue0 is also used and based on this the appropriate interface
>>    commands are added to
>>    the wsdd command.
>>    - wsdd is also set up to run in a chroot
>>    - Has been tested on my vm testbed, initially by editing the files
>>    on the vm clone. After
>>    everything confiremd to be working, the build was successfully
>>    carried out and the
>>    .ipfire package was copied to a new vm clone installed and shown to
>>    perform as expected.
>>    This test only confirms that wsdd is correctly installed and
>>    started. Shutsdown and
>>    restarts on reboot successfully. Confirmed from the ps aux info that
>>    wsdd has been
>>    started with the correct options. Thge testing can not evaluate if
>>    wsdd enables windows
>>    systems newer than version 7 top be able to detect the samba shares
>>    as I have no
>>    windows systems.
>>    Fixes: Bug13445
>>    Tested-by: Adolf Belka <adolf.belka@ipfire.org>
>>    Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
>>    ---
>>    config/rootfiles/packages/wsdd | 2 +
>>    lfs/wsdd | 89 ++++++++++++++++++++++++++++++++++
>>    make.sh | 1 +
>>    src/initscripts/packages/wsdd | 63 ++++++++++++++++++++++++
>>    src/paks/wsdd/install.sh | 40 +++++++++++++++
>>    src/paks/wsdd/uninstall.sh | 30 ++++++++++++
>>    src/paks/wsdd/update.sh | 27 +++++++++++
>>    7 files changed, 252 insertions(+)
>>    create mode 100644 config/rootfiles/packages/wsdd
>>    create mode 100644 lfs/wsdd
>>    create mode 100644 src/initscripts/packages/wsdd
>>    create mode 100644 src/paks/wsdd/install.sh
>>    create mode 100644 src/paks/wsdd/uninstall.sh
>>    create mode 100644 src/paks/wsdd/update.sh
>>    diff --git a/config/rootfiles/packages/wsdd
>>    b/config/rootfiles/packages/wsdd
>>    new file mode 100644
>>    index 000000000..ce225043a
>>    --- /dev/null
>>    +++ b/config/rootfiles/packages/wsdd
>>    @@ -0,0 +1,2 @@
>>    +etc/rc.d/init.d/wsdd
>>    +usr/bin/wsdd
>>    diff --git a/lfs/wsdd b/lfs/wsdd
>>    new file mode 100644
>>    index 000000000..aa65e47ef
>>    --- /dev/null
>>    +++ b/lfs/wsdd
>>    @@ -0,0 +1,89 @@
>>    +###############################################################################
>>    +# #
>>    +# IPFire.org - A linux based firewall #
>>    +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org> #
>>    +# #
>>    +# This program is free software: you can redistribute it and/or
>>    modify #
>>    +# it under the terms of the GNU General Public License as published
>>    by #
>>    +# the Free Software Foundation, either version 3 of the License, or #
>>    +# (at your option) any later version. #
>>    +# #
>>    +# This program is distributed in the hope that it will be useful, #
>>    +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>    +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>    +# GNU General Public License for more details. #
>>    +# #
>>    +# You should have received a copy of the GNU General Public License #
>>    +# along with this program. If not, see
>>    <http://www.gnu.org/licenses/> <http://www.gnu.org/licenses/>>. #
>>    +# #
>>    +###############################################################################
>>    +
>>    +###############################################################################
>>    +# Definitions
>>    +###############################################################################
>>    +
>>    +include Config
>>    +
>>    +VER = 0.7.1
>>    +SUMMARY = A Web Service Discovery host daemon.
>>    +
>>    +THISAPP = wsdd-$(VER)
>>    +DL_FILE = $(THISAPP).tar.gz
>>    +DL_FROM = $(URL_IPFIRE)
>>    +DIR_APP = $(DIR_SRC)/$(THISAPP)
>>    +TARGET = $(DIR_INFO)/$(THISAPP)
>>    +PROG = wsdd
>>    +PAK_VER = 1
>>    +
>>    +DEPS =
>>    +
>>    +SERVICES = wsdd
>>    +
>>    +###############################################################################
>>    +# Top-level Rules
>>    +###############################################################################
>>    +
>>    +objects = $(DL_FILE)
>>    +
>>    +$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>    +
>>    +$(DL_FILE)_BLAKE2 =
>>    ce43022c3bd9f7ff1fd7169ac0d5ab6b2ff78d35c221c05b2e20908a5772d563ab2aca571d4e6ae48a55d19d4adcb9cde60f720ae47af8ee950198224fcfdb26
>>    +
>>    +install : $(TARGET)
>>    +
>>    +check : $(patsubst %,$(DIR_CHK)/%,$(objects))
>>    +
>>    +download :$(patsubst %,$(DIR_DL)/%,$(objects))
>>    +
>>    +b2 : $(subst %,%_BLAKE2,$(objects))
>>    +
>>    +dist:
>>    + @$(PAK)
>>    +
>>    +###############################################################################
>>    +# Downloading, checking, b2sum
>>    +###############################################################################
>>    +
>>    +$(patsubst %,$(DIR_CHK)/%,$(objects)) :
>>    + @$(CHECK)
>>    +
>>    +$(patsubst %,$(DIR_DL)/%,$(objects)) :
>>    + @$(LOAD)
>>    +
>>    +$(subst %,%_BLAKE2,$(objects)) :
>>    + @$(B2SUM)
>>    +
>>    +###############################################################################
>>    +# Installation Details
>>    +###############################################################################
>>    +
>>    +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>    + @$(PREBUILD)
>>    + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
>>    + cd $(DIR_APP) && cp src/wsdd.py /usr/bin/wsdd
>>    +
>>    + #install initscripts
>>    + $(call INSTALL_INITSCRIPTS,$(SERVICES))
>>    +
>>    + @rm -rf $(DIR_APP)
>>    + @$(POSTBUILD)
>>    diff --git a/make.sh b/make.sh
>>    index 06e09c9a3..5af3dedc3 100755
>>    --- a/make.sh
>>    +++ b/make.sh
>>    @@ -1699,6 +1699,7 @@ buildipfire() {
>>    lfsmake2 perl-MIME-Base32
>>    lfsmake2 perl-URI-Encode
>>    lfsmake2 rsnapshot
>>    + lfsmake2 wsdd
>>    # Kernelbuild ... current we have no platform that need
>>    # multi kernel builds so KCFG is empty
>>    diff --git a/src/initscripts/packages/wsdd
>>    b/src/initscripts/packages/wsdd
>>    new file mode 100644
>>    index 000000000..c5207f872
>>    --- /dev/null
>>    +++ b/src/initscripts/packages/wsdd
>>    @@ -0,0 +1,63 @@
>>    +#!/bin/sh
>>    +###############################################################################
>>    +# #
>>    +# IPFire.org - A linux based firewall #
>>    +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org> #
>>    +# #
>>    +# This program is free software: you can redistribute it and/or
>>    modify #
>>    +# it under the terms of the GNU General Public License as published
>>    by #
>>    +# the Free Software Foundation, either version 3 of the License, or #
>>    +# (at your option) any later version. #
>>    +# #
>>    +# This program is distributed in the hope that it will be useful, #
>>    +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>    +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>    +# GNU General Public License for more details. #
>>    +# #
>>    +# You should have received a copy of the GNU General Public License #
>>    +# along with this program. If not, see
>>    <http://www.gnu.org/licenses/> <http://www.gnu.org/licenses/>>. #
>>    +# #
>>    +###############################################################################
>>    +
>>    +. /etc/sysconfig/rc
>>    +. $rc_functions
>>    +
>>    +eval $(/usr/local/bin/readhash /var/ipfire/ethernet/settings)
>>    +
>>    +# Create chroot directory for wsdd
>>    +mkdir -p /var/run/wsdd
>>    +
>>    +INTERFACES="-i ${GREEN_DEV}"
>>    + if [ -n "${BLUE_DEV}" ]; then
>>    + INTERFACES="${INTERFACES} -i ${BLUE_DEV}"
>>    + fi
>>    +WSDD_WORKGROUP="-w $(/usr/bin/testparm -s --parameter-name
>>    workgroup 2>/dev/null)"
>>    +WSDD_USER="-u wsdd:wsdd"
>>    +WSDD_CHROOT="-c /var/run/wsdd"
>>    +
>>    +case "$1" in
>>    + start)
>>    + boot_mesg "Starting wsdd daemon..."
>>    + loadproc -b /usr/bin/wsdd -4 ${WSDD_USER} ${INTERFACES}
>>    ${WSDD_WORKGROUP} ${WSDD_CHROOT}
>>    + sleep 1
>>    + echo $(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk '{print
>>    $2}') > /var/run/wsdd/pid
>>    + ;;
>>    + stop)
>>    + boot_mesg "Stopping wsdd daemon..."
>>    + killproc -p /var/run/wsdd/pid /usr/bin/wsdd
>>    + ;;
>>    + status)
>>    + WSDD_PID=$(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk
>>    '{print $2}')
>>    + if [ -n "${WSDD_PID}" ]; then
>>    + echo -e "\\033[1;36m /usr/bin/wsdd is running with Process"\
>>    + "ID(s) $WSDD_PID.\\033[0;39m"
>>    + else
>>    + echo -e "\\033[1;36m /usr/bin/wsdd is not running.\\033[0;39m"
>>    + fi
>>    + ;;
>>    + *)
>>    + echo "Usage: $0 (start|stop|status)"
>>    + exit 1
>>    + ;;
>>    +esac
>>    +
>>    diff --git a/src/paks/wsdd/install.sh b/src/paks/wsdd/install.sh
>>    new file mode 100644
>>    index 000000000..181b84eb9
>>    --- /dev/null
>>    +++ b/src/paks/wsdd/install.sh
>>    @@ -0,0 +1,40 @@
>>    +#!/bin/bash
>>    +############################################################################
>>    +# #
>>    +# This file is part of the IPFire Firewall. #
>>    +# #
>>    +# IPFire is free software; you can redistribute it and/or modify #
>>    +# it under the terms of the GNU General Public License as published
>>    by #
>>    +# the Free Software Foundation; either version 2 of the License, or #
>>    +# (at your option) any later version. #
>>    +# #
>>    +# IPFire is distributed in the hope that it will be useful, #
>>    +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>    +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>    +# GNU General Public License for more details. #
>>    +# #
>>    +# You should have received a copy of the GNU General Public License #
>>    +# along with IPFire; if not, write to the Free Software #
>>    +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>    02111-1307 USA #
>>    +# #
>>    +# Copyright (C) 2007 IPFire-Team <info@ipfire.org>. #
>>    +# #
>>    +############################################################################
>>    +#
>>    +. /opt/pakfire/lib/functions.sh
>>    +
>>    +# If the wsdd user does not exist yet, then create it and add to
>>    wsdd group.
>>    +if ! getent user wsdd >/dev/null; then
>>    + useradd -r -U -d / -s /bin/false -c "wsdd user" wsdd
>>    + usermod -a -G wsdd wsdd
>>    +fi
>>    +
>>    +extract_files
>>    +restore_backup ${NAME}
>>    +
>>    +# Create startlinks
>>    +ln -sf ../init.d/wsdd /etc/rc.d/rc0.d/K35wsdd
>>    +ln -sf ../init.d/wsdd /etc/rc.d/rc3.d/S65wsdd
>>    +ln -sf ../init.d/wsdd /etc/rc.d/rc6.d/K35wsdd
>>    +start_service ${NAME}
>>    +exit 0
>>    diff --git a/src/paks/wsdd/uninstall.sh b/src/paks/wsdd/uninstall.sh
>>    new file mode 100644
>>    index 000000000..4c52ee281
>>    --- /dev/null
>>    +++ b/src/paks/wsdd/uninstall.sh
>>    @@ -0,0 +1,30 @@
>>    +#!/bin/bash
>>    +############################################################################
>>    +# #
>>    +# This file is part of the IPFire Firewall. #
>>    +# #
>>    +# IPFire is free software; you can redistribute it and/or modify #
>>    +# it under the terms of the GNU General Public License as published
>>    by #
>>    +# the Free Software Foundation; either version 2 of the License, or #
>>    +# (at your option) any later version. #
>>    +# #
>>    +# IPFire is distributed in the hope that it will be useful, #
>>    +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>    +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>    +# GNU General Public License for more details. #
>>    +# #
>>    +# You should have received a copy of the GNU General Public License #
>>    +# along with IPFire; if not, write to the Free Software #
>>    +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>    02111-1307 USA #
>>    +# #
>>    +# Copyright (C) 2007 IPFire-Team <info@ipfire.org>. #
>>    +# #
>>    +############################################################################
>>    +#
>>    +. /opt/pakfire/lib/functions.sh
>>    +stop_service ${NAME}
>>    +make_backup ${NAME}
>>    +remove_files
>>    +# Remove all start links.
>>    +rm -rf /etc/rc.d/rc*.d/*wsdd
>>    +exit 0
>>    diff --git a/src/paks/wsdd/update.sh b/src/paks/wsdd/update.sh
>>    new file mode 100644
>>    index 000000000..99776659c
>>    --- /dev/null
>>    +++ b/src/paks/wsdd/update.sh
>>    @@ -0,0 +1,27 @@
>>    +#!/bin/bash
>>    +############################################################################
>>    +# #
>>    +# This file is part of the IPFire Firewall. #
>>    +# #
>>    +# IPFire is free software; you can redistribute it and/or modify #
>>    +# it under the terms of the GNU General Public License as published
>>    by #
>>    +# the Free Software Foundation; either version 2 of the License, or #
>>    +# (at your option) any later version. #
>>    +# #
>>    +# IPFire is distributed in the hope that it will be useful, #
>>    +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>    +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>    +# GNU General Public License for more details. #
>>    +# #
>>    +# You should have received a copy of the GNU General Public License #
>>    +# along with IPFire; if not, write to the Free Software #
>>    +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>    02111-1307 USA #
>>    +# #
>>    +# Copyright (C) 2007-2020 IPFire-Team <info@ipfire.org>. #
>>    +# #
>>    +############################################################################
>>    +#
>>    +. /opt/pakfire/lib/functions.sh
>>    +extract_backup_includes
>>    +./uninstall.sh
>>    +./install.sh
>>    --     2.43.0
> 
> -- 
> Sent from my laptop
  

Hi Michael,

On 12/01/2024 14:40, Michael Tremer wrote:
> Hello,
> 
>> On 12 Jan 2024, at 11:14, Adolf Belka <adolf.belka@ipfire.org> wrote:
>>
>> Hi Daniel,
>>
>> On 11/01/2024 17:11, daniel.weismueller@ipfire.org wrote:
>>> Hi Adolf.
>>> We have looked at your work. First of all, thank you very much.
>>> Your scripts seems to work fine. I will start tomorrow to test them in whole. However we have made a few changes.
>>> In particular, we have adapted the code to the existing code in IPFire.
>>> Please take look at Michaels wsdd branch.
>>> https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd>
>>
>> That looks very good. I clearly still have a bit to learn about how to code in a more tidy manner.
> 
> It worked… I was just in the swing of it :)
> 
>> I also see that Michael fixed the pid fault in the loadproc/statusproc/killproc while I just created a workaround solution for the wsdd initscript alone.
> 
> loadproc/statusproc/killproc are really difficult to handle. They are supposed to be LSB-conformant functions, but I believe that it never really happened that they because universally used and compatible between distributions. Now with systemd, there is no more need…
> 
> And it is also because of systemd that daemons behave differently now - actually not even like daemons whatsoever any more. They used to fork themselves into the background which made all the PID processing necessary, because the init script could not know the PID of the process forked in the background. Now, they don’t do this any more because without the fork, things are easier for systemd to manage.
> 
> The new -b switch that was added some while ago is already helping us to launch such new processes into the background, but we don’t have PID files any more. And since scripts don’t work with statusproc/killproc, I thought it might be a good idea to add this to loadproc as I am expecting us to need this more often in the future.
> 
> And while I was thinking about the problem, I figured it would be easier to send a patch for those few lines instead of explaining it in words - which probably would have been a little bit longer.
> 
> The only noteworthy thing is that there was a potential security issue in passing around the shell arguments as strings because the workgroup variable could have been almost anything. I am not sure what validation samba would do, but I thought it would be best not to rely on that. A two words (with a space) workgroup would have caused wsdd not to start, because it would have seen a command line like “—-workgroup ABC DEF” with ABC being interpreted as the workgroup and DEF being some garbage that wsdd would not understand. The trick with the array is that it would pass the arguments like this “—-workgroup ‘ABC DEF’” which prevents that “DEF” would be interpreted as an extra parameter.
> 
> So, everything is fine :) Especially after I added the “restart” command :)
> 
>> I did have a look at the code in the functions file but struggled to understand it enough to be able to figure out what was giving the problem I was experiencing.
> 
> Which functions?

The /src/initscripts/system/functions file from the git repo that has 
the loadproc, statusproc and killproc functions in it.

Regards,

Adolf.

> 
>> I am glad that has been sorted and the initscript tidied up in line with IPFire coding style.
> 
> That is why we are all working together...
> 
>> Will try and remember that in future.
> 
> If not, we are here to help :)
> 
> -Michael
> 
>> Regards,
>> Adolf.
>>
>>> -
>>> Daniel
>>> Am 10. Januar 2024 um 14:30 schrieb "Adolf Belka" <adolf.belka@ipfire.org <mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf.belka%40ipfire.org%3E>>:
>>>     - lfs and toorfile created for wsdd
>>>     - wsdd added to make.sh script
>>>     - created install/update/uninstall scripts for wsdd that create an
>>>     unpriveleged user and
>>>     group.
>>>     - initscript created for wsdd. As wsdd is a python3 script, when it
>>>     is run as a daemon the
>>>     pidof command does not find any pid for wsdd. So a directory/file
>>>     for a pid file was
>>>     created. This is then passed to the loadproc and killproc commands.
>>>     After the loadproc
>>>     command has been created the pid is extracted from the ps aux
>>>     command and put into the
>>>     pid file. This then works when running the killproc command for it
>>>     to know what to go
>>>     and stop. The statusproc command does not have the ability to feed
>>>     in the pid from a
>>>     pid file and so it fails to find a running wsdd as it uses the pidof
>>>     command. Code was
>>>     added to the status section of the initscript to check if the pid
>>>     file exists and if so
>>>     to print the same command as used with the statusproc command, and
>>>     also the same
>>>     wording if the pid file does not exist because wsdd is not running.
>>>     - info from the ethernet/settings file is used to identify if only
>>>     green0 is available or
>>>     if blue0 is also used and based on this the appropriate interface
>>>     commands are added to
>>>     the wsdd command.
>>>     - wsdd is also set up to run in a chroot
>>>     - Has been tested on my vm testbed, initially by editing the files
>>>     on the vm clone. After
>>>     everything confiremd to be working, the build was successfully
>>>     carried out and the
>>>     .ipfire package was copied to a new vm clone installed and shown to
>>>     perform as expected.
>>>     This test only confirms that wsdd is correctly installed and
>>>     started. Shutsdown and
>>>     restarts on reboot successfully. Confirmed from the ps aux info that
>>>     wsdd has been
>>>     started with the correct options. Thge testing can not evaluate if
>>>     wsdd enables windows
>>>     systems newer than version 7 top be able to detect the samba shares
>>>     as I have no
>>>     windows systems.
>>>     Fixes: Bug13445
>>>     Tested-by: Adolf Belka <adolf.belka@ipfire.org>
>>>     Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
>>>     ---
>>>     config/rootfiles/packages/wsdd | 2 +
>>>     lfs/wsdd | 89 ++++++++++++++++++++++++++++++++++
>>>     make.sh | 1 +
>>>     src/initscripts/packages/wsdd | 63 ++++++++++++++++++++++++
>>>     src/paks/wsdd/install.sh | 40 +++++++++++++++
>>>     src/paks/wsdd/uninstall.sh | 30 ++++++++++++
>>>     src/paks/wsdd/update.sh | 27 +++++++++++
>>>     7 files changed, 252 insertions(+)
>>>     create mode 100644 config/rootfiles/packages/wsdd
>>>     create mode 100644 lfs/wsdd
>>>     create mode 100644 src/initscripts/packages/wsdd
>>>     create mode 100644 src/paks/wsdd/install.sh
>>>     create mode 100644 src/paks/wsdd/uninstall.sh
>>>     create mode 100644 src/paks/wsdd/update.sh
>>>     diff --git a/config/rootfiles/packages/wsdd
>>>     b/config/rootfiles/packages/wsdd
>>>     new file mode 100644
>>>     index 000000000..ce225043a
>>>     --- /dev/null
>>>     +++ b/config/rootfiles/packages/wsdd
>>>     @@ -0,0 +1,2 @@
>>>     +etc/rc.d/init.d/wsdd
>>>     +usr/bin/wsdd
>>>     diff --git a/lfs/wsdd b/lfs/wsdd
>>>     new file mode 100644
>>>     index 000000000..aa65e47ef
>>>     --- /dev/null
>>>     +++ b/lfs/wsdd
>>>     @@ -0,0 +1,89 @@
>>>     +###############################################################################
>>>     +# #
>>>     +# IPFire.org - A linux based firewall #
>>>     +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org> #
>>>     +# #
>>>     +# This program is free software: you can redistribute it and/or
>>>     modify #
>>>     +# it under the terms of the GNU General Public License as published
>>>     by #
>>>     +# the Free Software Foundation, either version 3 of the License, or #
>>>     +# (at your option) any later version. #
>>>     +# #
>>>     +# This program is distributed in the hope that it will be useful, #
>>>     +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>     +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>     +# GNU General Public License for more details. #
>>>     +# #
>>>     +# You should have received a copy of the GNU General Public License #
>>>     +# along with this program. If not, see
>>>     <http://www.gnu.org/licenses/> <http://www.gnu.org/licenses/>>. #
>>>     +# #
>>>     +###############################################################################
>>>     +
>>>     +###############################################################################
>>>     +# Definitions
>>>     +###############################################################################
>>>     +
>>>     +include Config
>>>     +
>>>     +VER = 0.7.1
>>>     +SUMMARY = A Web Service Discovery host daemon.
>>>     +
>>>     +THISAPP = wsdd-$(VER)
>>>     +DL_FILE = $(THISAPP).tar.gz
>>>     +DL_FROM = $(URL_IPFIRE)
>>>     +DIR_APP = $(DIR_SRC)/$(THISAPP)
>>>     +TARGET = $(DIR_INFO)/$(THISAPP)
>>>     +PROG = wsdd
>>>     +PAK_VER = 1
>>>     +
>>>     +DEPS =
>>>     +
>>>     +SERVICES = wsdd
>>>     +
>>>     +###############################################################################
>>>     +# Top-level Rules
>>>     +###############################################################################
>>>     +
>>>     +objects = $(DL_FILE)
>>>     +
>>>     +$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>>     +
>>>     +$(DL_FILE)_BLAKE2 =
>>>     ce43022c3bd9f7ff1fd7169ac0d5ab6b2ff78d35c221c05b2e20908a5772d563ab2aca571d4e6ae48a55d19d4adcb9cde60f720ae47af8ee950198224fcfdb26
>>>     +
>>>     +install : $(TARGET)
>>>     +
>>>     +check : $(patsubst %,$(DIR_CHK)/%,$(objects))
>>>     +
>>>     +download :$(patsubst %,$(DIR_DL)/%,$(objects))
>>>     +
>>>     +b2 : $(subst %,%_BLAKE2,$(objects))
>>>     +
>>>     +dist:
>>>     + @$(PAK)
>>>     +
>>>     +###############################################################################
>>>     +# Downloading, checking, b2sum
>>>     +###############################################################################
>>>     +
>>>     +$(patsubst %,$(DIR_CHK)/%,$(objects)) :
>>>     + @$(CHECK)
>>>     +
>>>     +$(patsubst %,$(DIR_DL)/%,$(objects)) :
>>>     + @$(LOAD)
>>>     +
>>>     +$(subst %,%_BLAKE2,$(objects)) :
>>>     + @$(B2SUM)
>>>     +
>>>     +###############################################################################
>>>     +# Installation Details
>>>     +###############################################################################
>>>     +
>>>     +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>>     + @$(PREBUILD)
>>>     + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
>>>     + cd $(DIR_APP) && cp src/wsdd.py /usr/bin/wsdd
>>>     +
>>>     + #install initscripts
>>>     + $(call INSTALL_INITSCRIPTS,$(SERVICES))
>>>     +
>>>     + @rm -rf $(DIR_APP)
>>>     + @$(POSTBUILD)
>>>     diff --git a/make.sh b/make.sh
>>>     index 06e09c9a3..5af3dedc3 100755
>>>     --- a/make.sh
>>>     +++ b/make.sh
>>>     @@ -1699,6 +1699,7 @@ buildipfire() {
>>>     lfsmake2 perl-MIME-Base32
>>>     lfsmake2 perl-URI-Encode
>>>     lfsmake2 rsnapshot
>>>     + lfsmake2 wsdd
>>>     # Kernelbuild ... current we have no platform that need
>>>     # multi kernel builds so KCFG is empty
>>>     diff --git a/src/initscripts/packages/wsdd
>>>     b/src/initscripts/packages/wsdd
>>>     new file mode 100644
>>>     index 000000000..c5207f872
>>>     --- /dev/null
>>>     +++ b/src/initscripts/packages/wsdd
>>>     @@ -0,0 +1,63 @@
>>>     +#!/bin/sh
>>>     +###############################################################################
>>>     +# #
>>>     +# IPFire.org - A linux based firewall #
>>>     +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org> #
>>>     +# #
>>>     +# This program is free software: you can redistribute it and/or
>>>     modify #
>>>     +# it under the terms of the GNU General Public License as published
>>>     by #
>>>     +# the Free Software Foundation, either version 3 of the License, or #
>>>     +# (at your option) any later version. #
>>>     +# #
>>>     +# This program is distributed in the hope that it will be useful, #
>>>     +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>     +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>     +# GNU General Public License for more details. #
>>>     +# #
>>>     +# You should have received a copy of the GNU General Public License #
>>>     +# along with this program. If not, see
>>>     <http://www.gnu.org/licenses/> <http://www.gnu.org/licenses/>>. #
>>>     +# #
>>>     +###############################################################################
>>>     +
>>>     +. /etc/sysconfig/rc
>>>     +. $rc_functions
>>>     +
>>>     +eval $(/usr/local/bin/readhash /var/ipfire/ethernet/settings)
>>>     +
>>>     +# Create chroot directory for wsdd
>>>     +mkdir -p /var/run/wsdd
>>>     +
>>>     +INTERFACES="-i ${GREEN_DEV}"
>>>     + if [ -n "${BLUE_DEV}" ]; then
>>>     + INTERFACES="${INTERFACES} -i ${BLUE_DEV}"
>>>     + fi
>>>     +WSDD_WORKGROUP="-w $(/usr/bin/testparm -s --parameter-name
>>>     workgroup 2>/dev/null)"
>>>     +WSDD_USER="-u wsdd:wsdd"
>>>     +WSDD_CHROOT="-c /var/run/wsdd"
>>>     +
>>>     +case "$1" in
>>>     + start)
>>>     + boot_mesg "Starting wsdd daemon..."
>>>     + loadproc -b /usr/bin/wsdd -4 ${WSDD_USER} ${INTERFACES}
>>>     ${WSDD_WORKGROUP} ${WSDD_CHROOT}
>>>     + sleep 1
>>>     + echo $(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk '{print
>>>     $2}') > /var/run/wsdd/pid
>>>     + ;;
>>>     + stop)
>>>     + boot_mesg "Stopping wsdd daemon..."
>>>     + killproc -p /var/run/wsdd/pid /usr/bin/wsdd
>>>     + ;;
>>>     + status)
>>>     + WSDD_PID=$(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk
>>>     '{print $2}')
>>>     + if [ -n "${WSDD_PID}" ]; then
>>>     + echo -e "\\033[1;36m /usr/bin/wsdd is running with Process"\
>>>     + "ID(s) $WSDD_PID.\\033[0;39m"
>>>     + else
>>>     + echo -e "\\033[1;36m /usr/bin/wsdd is not running.\\033[0;39m"
>>>     + fi
>>>     + ;;
>>>     + *)
>>>     + echo "Usage: $0 (start|stop|status)"
>>>     + exit 1
>>>     + ;;
>>>     +esac
>>>     +
>>>     diff --git a/src/paks/wsdd/install.sh b/src/paks/wsdd/install.sh
>>>     new file mode 100644
>>>     index 000000000..181b84eb9
>>>     --- /dev/null
>>>     +++ b/src/paks/wsdd/install.sh
>>>     @@ -0,0 +1,40 @@
>>>     +#!/bin/bash
>>>     +############################################################################
>>>     +# #
>>>     +# This file is part of the IPFire Firewall. #
>>>     +# #
>>>     +# IPFire is free software; you can redistribute it and/or modify #
>>>     +# it under the terms of the GNU General Public License as published
>>>     by #
>>>     +# the Free Software Foundation; either version 2 of the License, or #
>>>     +# (at your option) any later version. #
>>>     +# #
>>>     +# IPFire is distributed in the hope that it will be useful, #
>>>     +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>     +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>     +# GNU General Public License for more details. #
>>>     +# #
>>>     +# You should have received a copy of the GNU General Public License #
>>>     +# along with IPFire; if not, write to the Free Software #
>>>     +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>>     02111-1307 USA #
>>>     +# #
>>>     +# Copyright (C) 2007 IPFire-Team <info@ipfire.org>. #
>>>     +# #
>>>     +############################################################################
>>>     +#
>>>     +. /opt/pakfire/lib/functions.sh
>>>     +
>>>     +# If the wsdd user does not exist yet, then create it and add to
>>>     wsdd group.
>>>     +if ! getent user wsdd >/dev/null; then
>>>     + useradd -r -U -d / -s /bin/false -c "wsdd user" wsdd
>>>     + usermod -a -G wsdd wsdd
>>>     +fi
>>>     +
>>>     +extract_files
>>>     +restore_backup ${NAME}
>>>     +
>>>     +# Create startlinks
>>>     +ln -sf ../init.d/wsdd /etc/rc.d/rc0.d/K35wsdd
>>>     +ln -sf ../init.d/wsdd /etc/rc.d/rc3.d/S65wsdd
>>>     +ln -sf ../init.d/wsdd /etc/rc.d/rc6.d/K35wsdd
>>>     +start_service ${NAME}
>>>     +exit 0
>>>     diff --git a/src/paks/wsdd/uninstall.sh b/src/paks/wsdd/uninstall.sh
>>>     new file mode 100644
>>>     index 000000000..4c52ee281
>>>     --- /dev/null
>>>     +++ b/src/paks/wsdd/uninstall.sh
>>>     @@ -0,0 +1,30 @@
>>>     +#!/bin/bash
>>>     +############################################################################
>>>     +# #
>>>     +# This file is part of the IPFire Firewall. #
>>>     +# #
>>>     +# IPFire is free software; you can redistribute it and/or modify #
>>>     +# it under the terms of the GNU General Public License as published
>>>     by #
>>>     +# the Free Software Foundation; either version 2 of the License, or #
>>>     +# (at your option) any later version. #
>>>     +# #
>>>     +# IPFire is distributed in the hope that it will be useful, #
>>>     +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>     +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>     +# GNU General Public License for more details. #
>>>     +# #
>>>     +# You should have received a copy of the GNU General Public License #
>>>     +# along with IPFire; if not, write to the Free Software #
>>>     +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>>     02111-1307 USA #
>>>     +# #
>>>     +# Copyright (C) 2007 IPFire-Team <info@ipfire.org>. #
>>>     +# #
>>>     +############################################################################
>>>     +#
>>>     +. /opt/pakfire/lib/functions.sh
>>>     +stop_service ${NAME}
>>>     +make_backup ${NAME}
>>>     +remove_files
>>>     +# Remove all start links.
>>>     +rm -rf /etc/rc.d/rc*.d/*wsdd
>>>     +exit 0
>>>     diff --git a/src/paks/wsdd/update.sh b/src/paks/wsdd/update.sh
>>>     new file mode 100644
>>>     index 000000000..99776659c
>>>     --- /dev/null
>>>     +++ b/src/paks/wsdd/update.sh
>>>     @@ -0,0 +1,27 @@
>>>     +#!/bin/bash
>>>     +############################################################################
>>>     +# #
>>>     +# This file is part of the IPFire Firewall. #
>>>     +# #
>>>     +# IPFire is free software; you can redistribute it and/or modify #
>>>     +# it under the terms of the GNU General Public License as published
>>>     by #
>>>     +# the Free Software Foundation; either version 2 of the License, or #
>>>     +# (at your option) any later version. #
>>>     +# #
>>>     +# IPFire is distributed in the hope that it will be useful, #
>>>     +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>     +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>     +# GNU General Public License for more details. #
>>>     +# #
>>>     +# You should have received a copy of the GNU General Public License #
>>>     +# along with IPFire; if not, write to the Free Software #
>>>     +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>>     02111-1307 USA #
>>>     +# #
>>>     +# Copyright (C) 2007-2020 IPFire-Team <info@ipfire.org>. #
>>>     +# #
>>>     +############################################################################
>>>     +#
>>>     +. /opt/pakfire/lib/functions.sh
>>>     +extract_backup_includes
>>>     +./uninstall.sh
>>>     +./install.sh
>>>     --     2.43.0
>>
>> -- 
>> Sent from my laptop
> 
>
  

Hi there.

I've installed and testetd the latest / modified version of the wsdd addon on two machines.
Nearly everything works as exspected. Also my Winodws PCs see the IPFIRE as a menber of the workgroup and could browse and use the samba shares. 
If you use the firewall option "Drop all Microsoft ports 135,137,138,139,445,1025" the clients in the blue network see the IPFIRE but aren't able to browse or connect to the shares.

I've recogniced only one thing that don't work like I exspected.

- If you stop or restart samba the wsdd addon won't stop or restart, too.


I think it would be better if the wssd stop too because if you change the workgroup and start the samba again the wsdd won't recognice it.

-
Daniel




Am 12. Januar 2024 um 16:09 schrieb "Adolf Belka" <adolf.belka@ipfire.org>:





> 
> Hi Michael,
> 
> On 12/01/2024 14:40, Michael Tremer wrote:
> 
> > 
> > Hello,
> > 
> >  On 12 Jan 2024, at 11:14, Adolf Belka <adolf.belka@ipfire.org> wrote:
> > 
> > > 
> > > Hi Daniel,
> > > 
> > >  On 11/01/2024 17:11, daniel.weismueller@ipfire.org wrote:
> > > 
> > 
> >  Hi Adolf.
> > 
> >  We have looked at your work. First of all, thank you very much.
> > 
> >  Your scripts seems to work fine. I will start tomorrow to test them in whole. However we have made a few changes.
> > 
> >  In particular, we have adapted the code to the existing code in IPFire.
> > 
> >  Please take look at Michaels wsdd branch.
> > 
> >  https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd> https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd%3E 
> > 
> > > 
> > > That looks very good. I clearly still have a bit to learn about how to code in a more tidy manner.
> > > 
> > 
> >  It worked… I was just in the swing of it :)
> > 
> >  I also see that Michael fixed the pid fault in the loadproc/statusproc/killproc while I just created a workaround solution for the wsdd initscript alone.
> > 
> >  loadproc/statusproc/killproc are really difficult to handle. They are supposed to be LSB-conformant functions, but I believe that it never really happened that they because universally used and compatible between distributions. Now with systemd, there is no more need…
> > 
> >  And it is also because of systemd that daemons behave differently now - actually not even like daemons whatsoever any more. They used to fork themselves into the background which made all the PID processing necessary, because the init script could not know the PID of the process forked in the background. Now, they don’t do this any more because without the fork, things are easier for systemd to manage.
> > 
> >  The new -b switch that was added some while ago is already helping us to launch such new processes into the background, but we don’t have PID files any more. And since scripts don’t work with statusproc/killproc, I thought it might be a good idea to add this to loadproc as I am expecting us to need this more often in the future.
> > 
> >  And while I was thinking about the problem, I figured it would be easier to send a patch for those few lines instead of explaining it in words - which probably would have been a little bit longer.
> > 
> >  The only noteworthy thing is that there was a potential security issue in passing around the shell arguments as strings because the workgroup variable could have been almost anything. I am not sure what validation samba would do, but I thought it would be best not to rely on that. A two words (with a space) workgroup would have caused wsdd not to start, because it would have seen a command line like “—-workgroup ABC DEF” with ABC being interpreted as the workgroup and DEF being some garbage that wsdd would not understand. The trick with the array is that it would pass the arguments like this “—-workgroup ‘ABC DEF’” which prevents that “DEF” would be interpreted as an extra parameter.
> > 
> >  So, everything is fine :) Especially after I added the “restart” command :)
> > 
> >  I did have a look at the code in the functions file but struggled to understand it enough to be able to figure out what was giving the problem I was experiencing.
> > 
> >  Which functions?
> > 
> 
> The /src/initscripts/system/functions file from the git repo that has the loadproc, statusproc and killproc functions in it.
> 
> Regards,
> 
> Adolf.
> 
> > 
> > I am glad that has been sorted and the initscript tidied up in line with IPFire coding style.
> > 
> >  That is why we are all working together...
> > 
> >  Will try and remember that in future.
> > 
> >  If not, we are here to help :)
> > 
> >  -Michael
> > 
> >  Regards,
> > 
> > > 
> > > Adolf.
> > > 
> > 
> >  -
> > 
> >  Daniel
> > 
> >  Am 10. Januar 2024 um 14:30 schrieb "Adolf Belka" <adolf.belka@ipfire.org <mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf.belka%40ipfire.org%3E>>:
> > 
> >  - lfs and toorfile created for wsdd
> > 
> >  - wsdd added to make.sh script
> > 
> >  - created install/update/uninstall scripts for wsdd that create an
> > 
> >  unpriveleged user and
> > 
> >  group.
> > 
> >  - initscript created for wsdd. As wsdd is a python3 script, when it
> > 
> >  is run as a daemon the
> > 
> >  pidof command does not find any pid for wsdd. So a directory/file
> > 
> >  for a pid file was
> > 
> >  created. This is then passed to the loadproc and killproc commands.
> > 
> >  After the loadproc
> > 
> >  command has been created the pid is extracted from the ps aux
> > 
> >  command and put into the
> > 
> >  pid file. This then works when running the killproc command for it
> > 
> >  to know what to go
> > 
> >  and stop. The statusproc command does not have the ability to feed
> > 
> >  in the pid from a
> > 
> >  pid file and so it fails to find a running wsdd as it uses the pidof
> > 
> >  command. Code was
> > 
> >  added to the status section of the initscript to check if the pid
> > 
> >  file exists and if so
> > 
> >  to print the same command as used with the statusproc command, and
> > 
> >  also the same
> > 
> >  wording if the pid file does not exist because wsdd is not running.
> > 
> >  - info from the ethernet/settings file is used to identify if only
> > 
> >  green0 is available or
> > 
> >  if blue0 is also used and based on this the appropriate interface
> > 
> >  commands are added to
> > 
> >  the wsdd command.
> > 
> >  - wsdd is also set up to run in a chroot
> > 
> >  - Has been tested on my vm testbed, initially by editing the files
> > 
> >  on the vm clone. After
> > 
> >  everything confiremd to be working, the build was successfully
> > 
> >  carried out and the
> > 
> >  .ipfire package was copied to a new vm clone installed and shown to
> > 
> >  perform as expected.
> > 
> >  This test only confirms that wsdd is correctly installed and
> > 
> >  started. Shutsdown and
> > 
> >  restarts on reboot successfully. Confirmed from the ps aux info that
> > 
> >  wsdd has been
> > 
> >  started with the correct options. Thge testing can not evaluate if
> > 
> >  wsdd enables windows
> > 
> >  systems newer than version 7 top be able to detect the samba shares
> > 
> >  as I have no
> > 
> >  windows systems.
> > 
> >  Fixes: Bug13445
> > 
> >  Tested-by: Adolf Belka <adolf.belka@ipfire.org>
> > 
> >  Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
> > 
> >  ---
> > 
> >  config/rootfiles/packages/wsdd | 2 +
> > 
> >  lfs/wsdd | 89 ++++++++++++++++++++++++++++++++++
> > 
> >  make.sh | 1 +
> > 
> >  src/initscripts/packages/wsdd | 63 ++++++++++++++++++++++++
> > 
> >  src/paks/wsdd/install.sh | 40 +++++++++++++++
> > 
> >  src/paks/wsdd/uninstall.sh | 30 ++++++++++++
> > 
> >  src/paks/wsdd/update.sh | 27 +++++++++++
> > 
> >  7 files changed, 252 insertions(+)
> > 
> >  create mode 100644 config/rootfiles/packages/wsdd
> > 
> >  create mode 100644 lfs/wsdd
> > 
> >  create mode 100644 src/initscripts/packages/wsdd
> > 
> >  create mode 100644 src/paks/wsdd/install.sh
> > 
> >  create mode 100644 src/paks/wsdd/uninstall.sh
> > 
> >  create mode 100644 src/paks/wsdd/update.sh
> > 
> >  diff --git a/config/rootfiles/packages/wsdd
> > 
> >  b/config/rootfiles/packages/wsdd
> > 
> >  new file mode 100644
> > 
> >  index 000000000..ce225043a
> > 
> >  --- /dev/null
> > 
> >  +++ b/config/rootfiles/packages/wsdd
> > 
> >  @@ -0,0 +1,2 @@
> > 
> >  +etc/rc.d/init.d/wsdd
> > 
> >  +usr/bin/wsdd
> > 
> >  diff --git a/lfs/wsdd b/lfs/wsdd
> > 
> >  new file mode 100644
> > 
> >  index 000000000..aa65e47ef
> > 
> >  --- /dev/null
> > 
> >  +++ b/lfs/wsdd
> > 
> >  @@ -0,0 +1,89 @@
> > 
> >  +###############################################################################
> > 
> >  +# #
> > 
> >  +# IPFire.org - A linux based firewall #
> > 
> >  +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org> #
> > 
> >  +# #
> > 
> >  +# This program is free software: you can redistribute it and/or
> > 
> >  modify #
> > 
> >  +# it under the terms of the GNU General Public License as published
> > 
> >  by #
> > 
> >  +# the Free Software Foundation, either version 3 of the License, or #
> > 
> >  +# (at your option) any later version. #
> > 
> >  +# #
> > 
> >  +# This program is distributed in the hope that it will be useful, #
> > 
> >  +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> > 
> >  +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> > 
> >  +# GNU General Public License for more details. #
> > 
> >  +# #
> > 
> >  +# You should have received a copy of the GNU General Public License #
> > 
> >  +# along with this program. If not, see
> > 
> >  <http://www.gnu.org/licenses/> http://www.gnu.org/licenses/%3E  <http://www.gnu.org/licenses/>> http://www.gnu.org/licenses/%3E%3E . #
> > 
> >  +# #
> > 
> >  +###############################################################################
> > 
> >  +
> > 
> >  +###############################################################################
> > 
> >  +# Definitions
> > 
> >  +###############################################################################
> > 
> >  +
> > 
> >  +include Config
> > 
> >  +
> > 
> >  +VER = 0.7.1
> > 
> >  +SUMMARY = A Web Service Discovery host daemon.
> > 
> >  +
> > 
> >  +THISAPP = wsdd-$(VER)
> > 
> >  +DL_FILE = $(THISAPP).tar.gz
> > 
> >  +DL_FROM = $(URL_IPFIRE)
> > 
> >  +DIR_APP = $(DIR_SRC)/$(THISAPP)
> > 
> >  +TARGET = $(DIR_INFO)/$(THISAPP)
> > 
> >  +PROG = wsdd
> > 
> >  +PAK_VER = 1
> > 
> >  +
> > 
> >  +DEPS =
> > 
> >  +
> > 
> >  +SERVICES = wsdd
> > 
> >  +
> > 
> >  +###############################################################################
> > 
> >  +# Top-level Rules
> > 
> >  +###############################################################################
> > 
> >  +
> > 
> >  +objects = $(DL_FILE)
> > 
> >  +
> > 
> >  +$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
> > 
> >  +
> > 
> >  +$(DL_FILE)_BLAKE2 =
> > 
> >  ce43022c3bd9f7ff1fd7169ac0d5ab6b2ff78d35c221c05b2e20908a5772d563ab2aca571d4e6ae48a55d19d4adcb9cde60f720ae47af8ee950198224fcfdb26
> > 
> >  +
> > 
> >  +install : $(TARGET)
> > 
> >  +
> > 
> >  +check : $(patsubst %,$(DIR_CHK)/%,$(objects))
> > 
> >  +
> > 
> >  +download :$(patsubst %,$(DIR_DL)/%,$(objects))
> > 
> >  +
> > 
> >  +b2 : $(subst %,%_BLAKE2,$(objects))
> > 
> >  +
> > 
> >  +dist:
> > 
> >  + @$(PAK)
> > 
> >  +
> > 
> >  +###############################################################################
> > 
> >  +# Downloading, checking, b2sum
> > 
> >  +###############################################################################
> > 
> >  +
> > 
> >  +$(patsubst %,$(DIR_CHK)/%,$(objects)) :
> > 
> >  + @$(CHECK)
> > 
> >  +
> > 
> >  +$(patsubst %,$(DIR_DL)/%,$(objects)) :
> > 
> >  + @$(LOAD)
> > 
> >  +
> > 
> >  +$(subst %,%_BLAKE2,$(objects)) :
> > 
> >  + @$(B2SUM)
> > 
> >  +
> > 
> >  +###############################################################################
> > 
> >  +# Installation Details
> > 
> >  +###############################################################################
> > 
> >  +
> > 
> >  +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
> > 
> >  + @$(PREBUILD)
> > 
> >  + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
> > 
> >  + cd $(DIR_APP) && cp src/wsdd.py /usr/bin/wsdd
> > 
> >  +
> > 
> >  + #install initscripts
> > 
> >  + $(call INSTALL_INITSCRIPTS,$(SERVICES))
> > 
> >  +
> > 
> >  + @rm -rf $(DIR_APP)
> > 
> >  + @$(POSTBUILD)
> > 
> >  diff --git a/make.sh b/make.sh
> > 
> >  index 06e09c9a3..5af3dedc3 100755
> > 
> >  --- a/make.sh
> > 
> >  +++ b/make.sh
> > 
> >  @@ -1699,6 +1699,7 @@ buildipfire() {
> > 
> >  lfsmake2 perl-MIME-Base32
> > 
> >  lfsmake2 perl-URI-Encode
> > 
> >  lfsmake2 rsnapshot
> > 
> >  + lfsmake2 wsdd
> > 
> >  # Kernelbuild ... current we have no platform that need
> > 
> >  # multi kernel builds so KCFG is empty
> > 
> >  diff --git a/src/initscripts/packages/wsdd
> > 
> >  b/src/initscripts/packages/wsdd
> > 
> >  new file mode 100644
> > 
> >  index 000000000..c5207f872
> > 
> >  --- /dev/null
> > 
> >  +++ b/src/initscripts/packages/wsdd
> > 
> >  @@ -0,0 +1,63 @@
> > 
> >  +#!/bin/sh
> > 
> >  +###############################################################################
> > 
> >  +# #
> > 
> >  +# IPFire.org - A linux based firewall #
> > 
> >  +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org> #
> > 
> >  +# #
> > 
> >  +# This program is free software: you can redistribute it and/or
> > 
> >  modify #
> > 
> >  +# it under the terms of the GNU General Public License as published
> > 
> >  by #
> > 
> >  +# the Free Software Foundation, either version 3 of the License, or #
> > 
> >  +# (at your option) any later version. #
> > 
> >  +# #
> > 
> >  +# This program is distributed in the hope that it will be useful, #
> > 
> >  +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> > 
> >  +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> > 
> >  +# GNU General Public License for more details. #
> > 
> >  +# #
> > 
> >  +# You should have received a copy of the GNU General Public License #
> > 
> >  +# along with this program. If not, see
> > 
> >  <http://www.gnu.org/licenses/> http://www.gnu.org/licenses/%3E  <http://www.gnu.org/licenses/>> http://www.gnu.org/licenses/%3E%3E . #
> > 
> >  +# #
> > 
> >  +###############################################################################
> > 
> >  +
> > 
> >  +. /etc/sysconfig/rc
> > 
> >  +. $rc_functions
> > 
> >  +
> > 
> >  +eval $(/usr/local/bin/readhash /var/ipfire/ethernet/settings)
> > 
> >  +
> > 
> >  +# Create chroot directory for wsdd
> > 
> >  +mkdir -p /var/run/wsdd
> > 
> >  +
> > 
> >  +INTERFACES="-i ${GREEN_DEV}"
> > 
> >  + if [ -n "${BLUE_DEV}" ]; then
> > 
> >  + INTERFACES="${INTERFACES} -i ${BLUE_DEV}"
> > 
> >  + fi
> > 
> >  +WSDD_WORKGROUP="-w $(/usr/bin/testparm -s --parameter-name
> > 
> >  workgroup 2>/dev/null)"
> > 
> >  +WSDD_USER="-u wsdd:wsdd"
> > 
> >  +WSDD_CHROOT="-c /var/run/wsdd"
> > 
> >  +
> > 
> >  +case "$1" in
> > 
> >  + start)
> > 
> >  + boot_mesg "Starting wsdd daemon..."
> > 
> >  + loadproc -b /usr/bin/wsdd -4 ${WSDD_USER} ${INTERFACES}
> > 
> >  ${WSDD_WORKGROUP} ${WSDD_CHROOT}
> > 
> >  + sleep 1
> > 
> >  + echo $(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk '{print
> > 
> >  $2}') > /var/run/wsdd/pid
> > 
> >  + ;;
> > 
> >  + stop)
> > 
> >  + boot_mesg "Stopping wsdd daemon..."
> > 
> >  + killproc -p /var/run/wsdd/pid /usr/bin/wsdd
> > 
> >  + ;;
> > 
> >  + status)
> > 
> >  + WSDD_PID=$(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk
> > 
> >  '{print $2}')
> > 
> >  + if [ -n "${WSDD_PID}" ]; then
> > 
> >  + echo -e "\\033[1;36m /usr/bin/wsdd is running with Process"\
> > 
> >  + "ID(s) $WSDD_PID.\\033[0;39m"
> > 
> >  + else
> > 
> >  + echo -e "\\033[1;36m /usr/bin/wsdd is not running.\\033[0;39m"
> > 
> >  + fi
> > 
> >  + ;;
> > 
> >  + *)
> > 
> >  + echo "Usage: $0 (start|stop|status)"
> > 
> >  + exit 1
> > 
> >  + ;;
> > 
> >  +esac
> > 
> >  +
> > 
> >  diff --git a/src/paks/wsdd/install.sh b/src/paks/wsdd/install.sh
> > 
> >  new file mode 100644
> > 
> >  index 000000000..181b84eb9
> > 
> >  --- /dev/null
> > 
> >  +++ b/src/paks/wsdd/install.sh
> > 
> >  @@ -0,0 +1,40 @@
> > 
> >  +#!/bin/bash
> > 
> >  +############################################################################
> > 
> >  +# #
> > 
> >  +# This file is part of the IPFire Firewall. #
> > 
> >  +# #
> > 
> >  +# IPFire is free software; you can redistribute it and/or modify #
> > 
> >  +# it under the terms of the GNU General Public License as published
> > 
> >  by #
> > 
> >  +# the Free Software Foundation; either version 2 of the License, or #
> > 
> >  +# (at your option) any later version. #
> > 
> >  +# #
> > 
> >  +# IPFire is distributed in the hope that it will be useful, #
> > 
> >  +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> > 
> >  +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> > 
> >  +# GNU General Public License for more details. #
> > 
> >  +# #
> > 
> >  +# You should have received a copy of the GNU General Public License #
> > 
> >  +# along with IPFire; if not, write to the Free Software #
> > 
> >  +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
> > 
> >  02111-1307 USA #
> > 
> >  +# #
> > 
> >  +# Copyright (C) 2007 IPFire-Team <info@ipfire.org>. #
> > 
> >  +# #
> > 
> >  +############################################################################
> > 
> >  +#
> > 
> >  +. /opt/pakfire/lib/functions.sh
> > 
> >  +
> > 
> >  +# If the wsdd user does not exist yet, then create it and add to
> > 
> >  wsdd group.
> > 
> >  +if ! getent user wsdd >/dev/null; then
> > 
> >  + useradd -r -U -d / -s /bin/false -c "wsdd user" wsdd
> > 
> >  + usermod -a -G wsdd wsdd
> > 
> >  +fi
> > 
> >  +
> > 
> >  +extract_files
> > 
> >  +restore_backup ${NAME}
> > 
> >  +
> > 
> >  +# Create startlinks
> > 
> >  +ln -sf ../init.d/wsdd /etc/rc.d/rc0.d/K35wsdd
> > 
> >  +ln -sf ../init.d/wsdd /etc/rc.d/rc3.d/S65wsdd
> > 
> >  +ln -sf ../init.d/wsdd /etc/rc.d/rc6.d/K35wsdd
> > 
> >  +start_service ${NAME}
> > 
> >  +exit 0
> > 
> >  diff --git a/src/paks/wsdd/uninstall.sh b/src/paks/wsdd/uninstall.sh
> > 
> >  new file mode 100644
> > 
> >  index 000000000..4c52ee281
> > 
> >  --- /dev/null
> > 
> >  +++ b/src/paks/wsdd/uninstall.sh
> > 
> >  @@ -0,0 +1,30 @@
> > 
> >  +#!/bin/bash
> > 
> >  +############################################################################
> > 
> >  +# #
> > 
> >  +# This file is part of the IPFire Firewall. #
> > 
> >  +# #
> > 
> >  +# IPFire is free software; you can redistribute it and/or modify #
> > 
> >  +# it under the terms of the GNU General Public License as published
> > 
> >  by #
> > 
> >  +# the Free Software Foundation; either version 2 of the License, or #
> > 
> >  +# (at your option) any later version. #
> > 
> >  +# #
> > 
> >  +# IPFire is distributed in the hope that it will be useful, #
> > 
> >  +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> > 
> >  +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> > 
> >  +# GNU General Public License for more details. #
> > 
> >  +# #
> > 
> >  +# You should have received a copy of the GNU General Public License #
> > 
> >  +# along with IPFire; if not, write to the Free Software #
> > 
> >  +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
> > 
> >  02111-1307 USA #
> > 
> >  +# #
> > 
> >  +# Copyright (C) 2007 IPFire-Team <info@ipfire.org>. #
> > 
> >  +# #
> > 
> >  +############################################################################
> > 
> >  +#
> > 
> >  +. /opt/pakfire/lib/functions.sh
> > 
> >  +stop_service ${NAME}
> > 
> >  +make_backup ${NAME}
> > 
> >  +remove_files
> > 
> >  +# Remove all start links.
> > 
> >  +rm -rf /etc/rc.d/rc*.d/*wsdd
> > 
> >  +exit 0
> > 
> >  diff --git a/src/paks/wsdd/update.sh b/src/paks/wsdd/update.sh
> > 
> >  new file mode 100644
> > 
> >  index 000000000..99776659c
> > 
> >  --- /dev/null
> > 
> >  +++ b/src/paks/wsdd/update.sh
> > 
> >  @@ -0,0 +1,27 @@
> > 
> >  +#!/bin/bash
> > 
> >  +############################################################################
> > 
> >  +# #
> > 
> >  +# This file is part of the IPFire Firewall. #
> > 
> >  +# #
> > 
> >  +# IPFire is free software; you can redistribute it and/or modify #
> > 
> >  +# it under the terms of the GNU General Public License as published
> > 
> >  by #
> > 
> >  +# the Free Software Foundation; either version 2 of the License, or #
> > 
> >  +# (at your option) any later version. #
> > 
> >  +# #
> > 
> >  +# IPFire is distributed in the hope that it will be useful, #
> > 
> >  +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> > 
> >  +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> > 
> >  +# GNU General Public License for more details. #
> > 
> >  +# #
> > 
> >  +# You should have received a copy of the GNU General Public License #
> > 
> >  +# along with IPFire; if not, write to the Free Software #
> > 
> >  +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
> > 
> >  02111-1307 USA #
> > 
> >  +# #
> > 
> >  +# Copyright (C) 2007-2020 IPFire-Team <info@ipfire.org>. #
> > 
> >  +# #
> > 
> >  +############################################################################
> > 
> >  +#
> > 
> >  +. /opt/pakfire/lib/functions.sh
> > 
> >  +extract_backup_includes
> > 
> >  +./uninstall.sh
> > 
> >  +./install.sh
> > 
> >  -- 2.43.0
> > 
> > > 
> > > -- >> Sent from my laptop
> > >
> > 
> 
> -- Sent from my laptop
>
  

Hi Michael,

On 16/01/2024 11:30, daniel.weismueller@ipfire.org wrote:
> Hi there.
> 
> I've installed and testetd the latest / modified version of the wsdd 
> addon on two machines.
> Nearly everything works as exspected. Also my Winodws PCs see the IPFIRE 
> as a menber of the workgroup and could browse and use the samba shares.
> If you use the firewall option "Drop all Microsoft ports 
> 135,137,138,139,445,1025" the clients in the blue network see the IPFIRE 
> but aren't able to browse or connect to the shares.
> 
> I've recogniced only one thing that don't work like I exspected.
> 
> - If you stop or restart samba the wsdd addon won't stop or restart, too.
> 
> 
> I think it would be better if the wssd stop too because if you change 
> the workgroup and start the samba again the wsdd won't recognice it.

To make a patch to support this I need to have the wsdd patches that you 
created merged into next. Then I can work on having samba trigger the 
start and stop of wsdd so that it does not run independently but is 
synchronised with samba.

Regards,
Adolf.

> 
> -
> Daniel
> 
> 
> Am 12. Januar 2024 um 16:09 schrieb "Adolf Belka" 
> <adolf.belka@ipfire.org 
> <mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf.belka%40ipfire.org%3E>>:
> 
> 
> 
>     Hi Michael,
> 
> 
>     On 12/01/2024 14:40, Michael Tremer wrote:
> 
>         Hello,
> 
>         On 12 Jan 2024, at 11:14, Adolf Belka <adolf.belka@ipfire.org
>         <mailto:adolf.belka@ipfire.org>> wrote:
> 
>             Hi Daniel,
> 
> 
>             On 11/01/2024 17:11, daniel.weismueller@ipfire.org
>             <mailto:daniel.weismueller@ipfire.org> wrote:
> 
> 
>         Hi Adolf.
> 
>         We have looked at your work. First of all, thank you very much.
> 
>         Your scripts seems to work fine. I will start tomorrow to test
>         them in whole. However we have made a few changes.
> 
>         In particular, we have adapted the code to the existing code in
>         IPFire.
> 
>         Please take look at Michaels wsdd branch.
> 
>         https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd> <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd> <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd>>
> 
>             That looks very good. I clearly still have a bit to learn
>             about how to code in a more tidy manner.
> 
> 
>         It worked… I was just in the swing of it :)
> 
>         I also see that Michael fixed the pid fault in the
>         loadproc/statusproc/killproc while I just created a workaround
>         solution for the wsdd initscript alone.
> 
>         loadproc/statusproc/killproc are really difficult to handle.
>         They are supposed to be LSB-conformant functions, but I believe
>         that it never really happened that they because universally used
>         and compatible between distributions. Now with systemd, there is
>         no more need…
> 
>         And it is also because of systemd that daemons behave
>         differently now - actually not even like daemons whatsoever any
>         more. They used to fork themselves into the background which
>         made all the PID processing necessary, because the init script
>         could not know the PID of the process forked in the background.
>         Now, they don’t do this any more because without the fork,
>         things are easier for systemd to manage.
> 
>         The new -b switch that was added some while ago is already
>         helping us to launch such new processes into the background, but
>         we don’t have PID files any more. And since scripts don’t work
>         with statusproc/killproc, I thought it might be a good idea to
>         add this to loadproc as I am expecting us to need this more
>         often in the future.
> 
>         And while I was thinking about the problem, I figured it would
>         be easier to send a patch for those few lines instead of
>         explaining it in words - which probably would have been a little
>         bit longer.
> 
>         The only noteworthy thing is that there was a potential security
>         issue in passing around the shell arguments as strings because
>         the workgroup variable could have been almost anything. I am not
>         sure what validation samba would do, but I thought it would be
>         best not to rely on that. A two words (with a space) workgroup
>         would have caused wsdd not to start, because it would have seen
>         a command line like “—-workgroup ABC DEF” with ABC being
>         interpreted as the workgroup and DEF being some garbage that
>         wsdd would not understand. The trick with the array is that it
>         would pass the arguments like this “—-workgroup ‘ABC DEF’” which
>         prevents that “DEF” would be interpreted as an extra parameter.
> 
>         So, everything is fine :) Especially after I added the “restart”
>         command :)
> 
>         I did have a look at the code in the functions file but
>         struggled to understand it enough to be able to figure out what
>         was giving the problem I was experiencing.
> 
>         Which functions?
> 
> 
>     The /src/initscripts/system/functions file from the git repo that
>     has the loadproc, statusproc and killproc functions in it.
> 
> 
>     Regards,
> 
> 
>     Adolf.
> 
> 
>         I am glad that has been sorted and the initscript tidied up in
>         line with IPFire coding style.
> 
>         That is why we are all working together...
> 
>         Will try and remember that in future.
> 
>         If not, we are here to help :)
> 
>         -Michael
> 
>         Regards,
> 
>             Adolf.
> 
> 
>         -
> 
>         Daniel
> 
>         Am 10. Januar 2024 um 14:30 schrieb "Adolf Belka"
>         <adolf.belka@ipfire.org <mailto:adolf.belka@ipfire.org>
>         <mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf
>         <mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf>.belka%40ipfire.org%3E>>:
> 
>         - lfs and toorfile created for wsdd
> 
>         - wsdd added to make.sh script
> 
>         - created install/update/uninstall scripts for wsdd that create an
> 
>         unpriveleged user and
> 
>         group.
> 
>         - initscript created for wsdd. As wsdd is a python3 script, when it
> 
>         is run as a daemon the
> 
>         pidof command does not find any pid for wsdd. So a directory/file
> 
>         for a pid file was
> 
>         created. This is then passed to the loadproc and killproc commands.
> 
>         After the loadproc
> 
>         command has been created the pid is extracted from the ps aux
> 
>         command and put into the
> 
>         pid file. This then works when running the killproc command for it
> 
>         to know what to go
> 
>         and stop. The statusproc command does not have the ability to feed
> 
>         in the pid from a
> 
>         pid file and so it fails to find a running wsdd as it uses the pidof
> 
>         command. Code was
> 
>         added to the status section of the initscript to check if the pid
> 
>         file exists and if so
> 
>         to print the same command as used with the statusproc command, and
> 
>         also the same
> 
>         wording if the pid file does not exist because wsdd is not running.
> 
>         - info from the ethernet/settings file is used to identify if only
> 
>         green0 is available or
> 
>         if blue0 is also used and based on this the appropriate interface
> 
>         commands are added to
> 
>         the wsdd command.
> 
>         - wsdd is also set up to run in a chroot
> 
>         - Has been tested on my vm testbed, initially by editing the files
> 
>         on the vm clone. After
> 
>         everything confiremd to be working, the build was successfully
> 
>         carried out and the
> 
>         .ipfire package was copied to a new vm clone installed and shown to
> 
>         perform as expected.
> 
>         This test only confirms that wsdd is correctly installed and
> 
>         started. Shutsdown and
> 
>         restarts on reboot successfully. Confirmed from the ps aux info that
> 
>         wsdd has been
> 
>         started with the correct options. Thge testing can not evaluate if
> 
>         wsdd enables windows
> 
>         systems newer than version 7 top be able to detect the samba shares
> 
>         as I have no
> 
>         windows systems.
> 
>         Fixes: Bug13445
> 
>         Tested-by: Adolf Belka <adolf.belka@ipfire.org
>         <mailto:adolf.belka@ipfire.org>>
> 
>         Signed-off-by: Adolf Belka <adolf.belka@ipfire.org
>         <mailto:adolf.belka@ipfire.org>>
> 
>         ---
> 
>         config/rootfiles/packages/wsdd | 2 +
> 
>         lfs/wsdd | 89 ++++++++++++++++++++++++++++++++++
> 
>         make.sh | 1 +
> 
>         src/initscripts/packages/wsdd | 63 ++++++++++++++++++++++++
> 
>         src/paks/wsdd/install.sh | 40 +++++++++++++++
> 
>         src/paks/wsdd/uninstall.sh | 30 ++++++++++++
> 
>         src/paks/wsdd/update.sh | 27 +++++++++++
> 
>         7 files changed, 252 insertions(+)
> 
>         create mode 100644 config/rootfiles/packages/wsdd
> 
>         create mode 100644 lfs/wsdd
> 
>         create mode 100644 src/initscripts/packages/wsdd
> 
>         create mode 100644 src/paks/wsdd/install.sh
> 
>         create mode 100644 src/paks/wsdd/uninstall.sh
> 
>         create mode 100644 src/paks/wsdd/update.sh
> 
>         diff --git a/config/rootfiles/packages/wsdd
> 
>         b/config/rootfiles/packages/wsdd
> 
>         new file mode 100644
> 
>         index 000000000..ce225043a
> 
>         --- /dev/null
> 
>         +++ b/config/rootfiles/packages/wsdd
> 
>         @@ -0,0 +1,2 @@
> 
>         +etc/rc.d/init.d/wsdd
> 
>         +usr/bin/wsdd
> 
>         diff --git a/lfs/wsdd b/lfs/wsdd
> 
>         new file mode 100644
> 
>         index 000000000..aa65e47ef
> 
>         --- /dev/null
> 
>         +++ b/lfs/wsdd
> 
>         @@ -0,0 +1,89 @@
> 
>         +###############################################################################
> 
>         +# #
> 
>         +# IPFire.org - A linux based firewall #
> 
>         +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org
>         <mailto:info@ipfire.org>> #
> 
>         +# #
> 
>         +# This program is free software: you can redistribute it and/or
> 
>         modify #
> 
>         +# it under the terms of the GNU General Public License as published
> 
>         by #
> 
>         +# the Free Software Foundation, either version 3 of the
>         License, or #
> 
>         +# (at your option) any later version. #
> 
>         +# #
> 
>         +# This program is distributed in the hope that it will be useful, #
> 
>         +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
>         +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
>         +# GNU General Public License for more details. #
> 
>         +# #
> 
>         +# You should have received a copy of the GNU General Public
>         License #
> 
>         +# along with this program. If not, see
> 
>         <http://www.gnu.org/licenses/> <http://www.gnu.org/licenses/>>
>         <http://www.gnu.org/licenses/>> <http://www.gnu.org/licenses/>>>. #
> 
>         +# #
> 
>         +###############################################################################
> 
>         +
> 
>         +###############################################################################
> 
>         +# Definitions
> 
>         +###############################################################################
> 
>         +
> 
>         +include Config
> 
>         +
> 
>         +VER = 0.7.1
> 
>         +SUMMARY = A Web Service Discovery host daemon.
> 
>         +
> 
>         +THISAPP = wsdd-$(VER)
> 
>         +DL_FILE = $(THISAPP).tar.gz
> 
>         +DL_FROM = $(URL_IPFIRE)
> 
>         +DIR_APP = $(DIR_SRC)/$(THISAPP)
> 
>         +TARGET = $(DIR_INFO)/$(THISAPP)
> 
>         +PROG = wsdd
> 
>         +PAK_VER = 1
> 
>         +
> 
>         +DEPS =
> 
>         +
> 
>         +SERVICES = wsdd
> 
>         +
> 
>         +###############################################################################
> 
>         +# Top-level Rules
> 
>         +###############################################################################
> 
>         +
> 
>         +objects = $(DL_FILE)
> 
>         +
> 
>         +$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
> 
>         +
> 
>         +$(DL_FILE)_BLAKE2 =
> 
>         ce43022c3bd9f7ff1fd7169ac0d5ab6b2ff78d35c221c05b2e20908a5772d563ab2aca571d4e6ae48a55d19d4adcb9cde60f720ae47af8ee950198224fcfdb26
> 
>         +
> 
>         +install : $(TARGET)
> 
>         +
> 
>         +check : $(patsubst %,$(DIR_CHK)/%,$(objects))
> 
>         +
> 
>         +download :$(patsubst %,$(DIR_DL)/%,$(objects))
> 
>         +
> 
>         +b2 : $(subst %,%_BLAKE2,$(objects))
> 
>         +
> 
>         +dist:
> 
>         + @$(PAK)
> 
>         +
> 
>         +###############################################################################
> 
>         +# Downloading, checking, b2sum
> 
>         +###############################################################################
> 
>         +
> 
>         +$(patsubst %,$(DIR_CHK)/%,$(objects)) :
> 
>         + @$(CHECK)
> 
>         +
> 
>         +$(patsubst %,$(DIR_DL)/%,$(objects)) :
> 
>         + @$(LOAD)
> 
>         +
> 
>         +$(subst %,%_BLAKE2,$(objects)) :
> 
>         + @$(B2SUM)
> 
>         +
> 
>         +###############################################################################
> 
>         +# Installation Details
> 
>         +###############################################################################
> 
>         +
> 
>         +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
> 
>         + @$(PREBUILD)
> 
>         + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf
>         $(DIR_DL)/$(DL_FILE)
> 
>         + cd $(DIR_APP) && cp src/wsdd.py /usr/bin/wsdd
> 
>         +
> 
>         + #install initscripts
> 
>         + $(call INSTALL_INITSCRIPTS,$(SERVICES))
> 
>         +
> 
>         + @rm -rf $(DIR_APP)
> 
>         + @$(POSTBUILD)
> 
>         diff --git a/make.sh b/make.sh
> 
>         index 06e09c9a3..5af3dedc3 100755
> 
>         --- a/make.sh
> 
>         +++ b/make.sh
> 
>         @@ -1699,6 +1699,7 @@ buildipfire() {
> 
>         lfsmake2 perl-MIME-Base32
> 
>         lfsmake2 perl-URI-Encode
> 
>         lfsmake2 rsnapshot
> 
>         + lfsmake2 wsdd
> 
>         # Kernelbuild ... current we have no platform that need
> 
>         # multi kernel builds so KCFG is empty
> 
>         diff --git a/src/initscripts/packages/wsdd
> 
>         b/src/initscripts/packages/wsdd
> 
>         new file mode 100644
> 
>         index 000000000..c5207f872
> 
>         --- /dev/null
> 
>         +++ b/src/initscripts/packages/wsdd
> 
>         @@ -0,0 +1,63 @@
> 
>         +#!/bin/sh
> 
>         +###############################################################################
> 
>         +# #
> 
>         +# IPFire.org - A linux based firewall #
> 
>         +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org
>         <mailto:info@ipfire.org>> #
> 
>         +# #
> 
>         +# This program is free software: you can redistribute it and/or
> 
>         modify #
> 
>         +# it under the terms of the GNU General Public License as published
> 
>         by #
> 
>         +# the Free Software Foundation, either version 3 of the
>         License, or #
> 
>         +# (at your option) any later version. #
> 
>         +# #
> 
>         +# This program is distributed in the hope that it will be useful, #
> 
>         +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
>         +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
>         +# GNU General Public License for more details. #
> 
>         +# #
> 
>         +# You should have received a copy of the GNU General Public
>         License #
> 
>         +# along with this program. If not, see
> 
>         <http://www.gnu.org/licenses/> <http://www.gnu.org/licenses/>>
>         <http://www.gnu.org/licenses/>> <http://www.gnu.org/licenses/>>>. #
> 
>         +# #
> 
>         +###############################################################################
> 
>         +
> 
>         +. /etc/sysconfig/rc
> 
>         +. $rc_functions
> 
>         +
> 
>         +eval $(/usr/local/bin/readhash /var/ipfire/ethernet/settings)
> 
>         +
> 
>         +# Create chroot directory for wsdd
> 
>         +mkdir -p /var/run/wsdd
> 
>         +
> 
>         +INTERFACES="-i ${GREEN_DEV}"
> 
>         + if [ -n "${BLUE_DEV}" ]; then
> 
>         + INTERFACES="${INTERFACES} -i ${BLUE_DEV}"
> 
>         + fi
> 
>         +WSDD_WORKGROUP="-w $(/usr/bin/testparm -s --parameter-name
> 
>         workgroup 2>/dev/null)"
> 
>         +WSDD_USER="-u wsdd:wsdd"
> 
>         +WSDD_CHROOT="-c /var/run/wsdd"
> 
>         +
> 
>         +case "$1" in
> 
>         + start)
> 
>         + boot_mesg "Starting wsdd daemon..."
> 
>         + loadproc -b /usr/bin/wsdd -4 ${WSDD_USER} ${INTERFACES}
> 
>         ${WSDD_WORKGROUP} ${WSDD_CHROOT}
> 
>         + sleep 1
> 
>         + echo $(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk '{print
> 
>         $2}') > /var/run/wsdd/pid
> 
>         + ;;
> 
>         + stop)
> 
>         + boot_mesg "Stopping wsdd daemon..."
> 
>         + killproc -p /var/run/wsdd/pid /usr/bin/wsdd
> 
>         + ;;
> 
>         + status)
> 
>         + WSDD_PID=$(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk
> 
>         '{print $2}')
> 
>         + if [ -n "${WSDD_PID}" ]; then
> 
>         + echo -e "\\033[1;36m /usr/bin/wsdd is running with Process"\
> 
>         + "ID(s) $WSDD_PID.\\033[0;39m"
> 
>         + else
> 
>         + echo -e "\\033[1;36m /usr/bin/wsdd is not running.\\033[0;39m"
> 
>         + fi
> 
>         + ;;
> 
>         + *)
> 
>         + echo "Usage: $0 (start|stop|status)"
> 
>         + exit 1
> 
>         + ;;
> 
>         +esac
> 
>         +
> 
>         diff --git a/src/paks/wsdd/install.sh b/src/paks/wsdd/install.sh
> 
>         new file mode 100644
> 
>         index 000000000..181b84eb9
> 
>         --- /dev/null
> 
>         +++ b/src/paks/wsdd/install.sh
> 
>         @@ -0,0 +1,40 @@
> 
>         +#!/bin/bash
> 
>         +############################################################################
> 
>         +# #
> 
>         +# This file is part of the IPFire Firewall. #
> 
>         +# #
> 
>         +# IPFire is free software; you can redistribute it and/or modify #
> 
>         +# it under the terms of the GNU General Public License as published
> 
>         by #
> 
>         +# the Free Software Foundation; either version 2 of the
>         License, or #
> 
>         +# (at your option) any later version. #
> 
>         +# #
> 
>         +# IPFire is distributed in the hope that it will be useful, #
> 
>         +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
>         +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
>         +# GNU General Public License for more details. #
> 
>         +# #
> 
>         +# You should have received a copy of the GNU General Public
>         License #
> 
>         +# along with IPFire; if not, write to the Free Software #
> 
>         +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
> 
>         02111-1307 USA #
> 
>         +# #
> 
>         +# Copyright (C) 2007 IPFire-Team <info@ipfire.org
>         <mailto:info@ipfire.org>>. #
> 
>         +# #
> 
>         +############################################################################
> 
>         +#
> 
>         +. /opt/pakfire/lib/functions.sh
> 
>         +
> 
>         +# If the wsdd user does not exist yet, then create it and add to
> 
>         wsdd group.
> 
>         +if ! getent user wsdd >/dev/null; then
> 
>         + useradd -r -U -d / -s /bin/false -c "wsdd user" wsdd
> 
>         + usermod -a -G wsdd wsdd
> 
>         +fi
> 
>         +
> 
>         +extract_files
> 
>         +restore_backup ${NAME}
> 
>         +
> 
>         +# Create startlinks
> 
>         +ln -sf ../init.d/wsdd /etc/rc.d/rc0.d/K35wsdd
> 
>         +ln -sf ../init.d/wsdd /etc/rc.d/rc3.d/S65wsdd
> 
>         +ln -sf ../init.d/wsdd /etc/rc.d/rc6.d/K35wsdd
> 
>         +start_service ${NAME}
> 
>         +exit 0
> 
>         diff --git a/src/paks/wsdd/uninstall.sh b/src/paks/wsdd/uninstall.sh
> 
>         new file mode 100644
> 
>         index 000000000..4c52ee281
> 
>         --- /dev/null
> 
>         +++ b/src/paks/wsdd/uninstall.sh
> 
>         @@ -0,0 +1,30 @@
> 
>         +#!/bin/bash
> 
>         +############################################################################
> 
>         +# #
> 
>         +# This file is part of the IPFire Firewall. #
> 
>         +# #
> 
>         +# IPFire is free software; you can redistribute it and/or modify #
> 
>         +# it under the terms of the GNU General Public License as published
> 
>         by #
> 
>         +# the Free Software Foundation; either version 2 of the
>         License, or #
> 
>         +# (at your option) any later version. #
> 
>         +# #
> 
>         +# IPFire is distributed in the hope that it will be useful, #
> 
>         +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
>         +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
>         +# GNU General Public License for more details. #
> 
>         +# #
> 
>         +# You should have received a copy of the GNU General Public
>         License #
> 
>         +# along with IPFire; if not, write to the Free Software #
> 
>         +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
> 
>         02111-1307 USA #
> 
>         +# #
> 
>         +# Copyright (C) 2007 IPFire-Team <info@ipfire.org
>         <mailto:info@ipfire.org>>. #
> 
>         +# #
> 
>         +############################################################################
> 
>         +#
> 
>         +. /opt/pakfire/lib/functions.sh
> 
>         +stop_service ${NAME}
> 
>         +make_backup ${NAME}
> 
>         +remove_files
> 
>         +# Remove all start links.
> 
>         +rm -rf /etc/rc.d/rc*.d/*wsdd
> 
>         +exit 0
> 
>         diff --git a/src/paks/wsdd/update.sh b/src/paks/wsdd/update.sh
> 
>         new file mode 100644
> 
>         index 000000000..99776659c
> 
>         --- /dev/null
> 
>         +++ b/src/paks/wsdd/update.sh
> 
>         @@ -0,0 +1,27 @@
> 
>         +#!/bin/bash
> 
>         +############################################################################
> 
>         +# #
> 
>         +# This file is part of the IPFire Firewall. #
> 
>         +# #
> 
>         +# IPFire is free software; you can redistribute it and/or modify #
> 
>         +# it under the terms of the GNU General Public License as published
> 
>         by #
> 
>         +# the Free Software Foundation; either version 2 of the
>         License, or #
> 
>         +# (at your option) any later version. #
> 
>         +# #
> 
>         +# IPFire is distributed in the hope that it will be useful, #
> 
>         +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
> 
>         +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
> 
>         +# GNU General Public License for more details. #
> 
>         +# #
> 
>         +# You should have received a copy of the GNU General Public
>         License #
> 
>         +# along with IPFire; if not, write to the Free Software #
> 
>         +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
> 
>         02111-1307 USA #
> 
>         +# #
> 
>         +# Copyright (C) 2007-2020 IPFire-Team <info@ipfire.org
>         <mailto:info@ipfire.org>>. #
> 
>         +# #
> 
>         +############################################################################
> 
>         +#
> 
>         +. /opt/pakfire/lib/functions.sh
> 
>         +extract_backup_includes
> 
>         +./uninstall.sh
> 
>         +./install.sh
> 
>         -- 2.43.0
> 
>             -- >> Sent from my laptop
> 
> 
>     -- Sent from my laptop
> 
>
  

Hello Adolf,

> On 16 Feb 2024, at 17:15, Adolf Belka <adolf.belka@ipfire.org> wrote:
> 
> Hi Michael,
> 
> On 16/01/2024 11:30, daniel.weismueller@ipfire.org wrote:
>> Hi there.
>> I've installed and testetd the latest / modified version of the wsdd addon on two machines.
>> Nearly everything works as exspected. Also my Winodws PCs see the IPFIRE as a menber of the workgroup and could browse and use the samba shares.
>> If you use the firewall option "Drop all Microsoft ports 135,137,138,139,445,1025" the clients in the blue network see the IPFIRE but aren't able to browse or connect to the shares.
>> I've recogniced only one thing that don't work like I exspected.
>> - If you stop or restart samba the wsdd addon won't stop or restart, too.
>> I think it would be better if the wssd stop too because if you change the workgroup and start the samba again the wsdd won't recognice it.
> 
> To make a patch to support this I need to have the wsdd patches that you created merged into next. Then I can work on having samba trigger the start and stop of wsdd so that it does not run independently but is synchronised with samba.

Okay, I have merged the wsdd branch into next.

Please let me know if there is anything else you need from me.

> Regards,
> Adolf.
> 
>> -
>> Daniel
>> Am 12. Januar 2024 um 16:09 schrieb "Adolf Belka" <adolf.belka@ipfire.org<mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf.belka%40ipfire.org%3E>>:
>>    Hi Michael,
>>    On 12/01/2024 14:40, Michael Tremer wrote:
>>        Hello,
>>        On 12 Jan 2024, at 11:14, Adolf Belka <adolf.belka@ipfire.org
>>        <mailto:adolf.belka@ipfire.org>> wrote:
>>            Hi Daniel,
>>            On 11/01/2024 17:11, daniel.weismueller@ipfire.org
>>            <mailto:daniel.weismueller@ipfire.org> wrote:
>>        Hi Adolf.
>>        We have looked at your work. First of all, thank you very much.
>>        Your scripts seems to work fine. I will start tomorrow to test
>>        them in whole. However we have made a few changes.
>>        In particular, we have adapted the code to the existing code in
>>        IPFire.
>>        Please take look at Michaels wsdd branch.
>>        https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd> <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd> <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd>>
>>            That looks very good. I clearly still have a bit to learn
>>            about how to code in a more tidy manner.
>>        It worked… I was just in the swing of it :)
>>        I also see that Michael fixed the pid fault in the
>>        loadproc/statusproc/killproc while I just created a workaround
>>        solution for the wsdd initscript alone.
>>        loadproc/statusproc/killproc are really difficult to handle.
>>        They are supposed to be LSB-conformant functions, but I believe
>>        that it never really happened that they because universally used
>>        and compatible between distributions. Now with systemd, there is
>>        no more need…
>>        And it is also because of systemd that daemons behave
>>        differently now - actually not even like daemons whatsoever any
>>        more. They used to fork themselves into the background which
>>        made all the PID processing necessary, because the init script
>>        could not know the PID of the process forked in the background.
>>        Now, they don’t do this any more because without the fork,
>>        things are easier for systemd to manage.
>>        The new -b switch that was added some while ago is already
>>        helping us to launch such new processes into the background, but
>>        we don’t have PID files any more. And since scripts don’t work
>>        with statusproc/killproc, I thought it might be a good idea to
>>        add this to loadproc as I am expecting us to need this more
>>        often in the future.
>>        And while I was thinking about the problem, I figured it would
>>        be easier to send a patch for those few lines instead of
>>        explaining it in words - which probably would have been a little
>>        bit longer.
>>        The only noteworthy thing is that there was a potential security
>>        issue in passing around the shell arguments as strings because
>>        the workgroup variable could have been almost anything. I am not
>>        sure what validation samba would do, but I thought it would be
>>        best not to rely on that. A two words (with a space) workgroup
>>        would have caused wsdd not to start, because it would have seen
>>        a command line like “—-workgroup ABC DEF” with ABC being
>>        interpreted as the workgroup and DEF being some garbage that
>>        wsdd would not understand. The trick with the array is that it
>>        would pass the arguments like this “—-workgroup ‘ABC DEF’” which
>>        prevents that “DEF” would be interpreted as an extra parameter.
>>        So, everything is fine :) Especially after I added the “restart”
>>        command :)
>>        I did have a look at the code in the functions file but
>>        struggled to understand it enough to be able to figure out what
>>        was giving the problem I was experiencing.
>>        Which functions?
>>    The /src/initscripts/system/functions file from the git repo that
>>    has the loadproc, statusproc and killproc functions in it.
>>    Regards,
>>    Adolf.
>>        I am glad that has been sorted and the initscript tidied up in
>>        line with IPFire coding style.
>>        That is why we are all working together...
>>        Will try and remember that in future.
>>        If not, we are here to help :)
>>        -Michael
>>        Regards,
>>            Adolf.
>>        -
>>        Daniel
>>        Am 10. Januar 2024 um 14:30 schrieb "Adolf Belka"
>>        <adolf.belka@ipfire.org <mailto:adolf.belka@ipfire.org>
>>        <mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf
>>        <mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf>.belka%40ipfire.org%3E>>:
>>        - lfs and toorfile created for wsdd
>>        - wsdd added to make.sh script
>>        - created install/update/uninstall scripts for wsdd that create an
>>        unpriveleged user and
>>        group.
>>        - initscript created for wsdd. As wsdd is a python3 script, when it
>>        is run as a daemon the
>>        pidof command does not find any pid for wsdd. So a directory/file
>>        for a pid file was
>>        created. This is then passed to the loadproc and killproc commands.
>>        After the loadproc
>>        command has been created the pid is extracted from the ps aux
>>        command and put into the
>>        pid file. This then works when running the killproc command for it
>>        to know what to go
>>        and stop. The statusproc command does not have the ability to feed
>>        in the pid from a
>>        pid file and so it fails to find a running wsdd as it uses the pidof
>>        command. Code was
>>        added to the status section of the initscript to check if the pid
>>        file exists and if so
>>        to print the same command as used with the statusproc command, and
>>        also the same
>>        wording if the pid file does not exist because wsdd is not running.
>>        - info from the ethernet/settings file is used to identify if only
>>        green0 is available or
>>        if blue0 is also used and based on this the appropriate interface
>>        commands are added to
>>        the wsdd command.
>>        - wsdd is also set up to run in a chroot
>>        - Has been tested on my vm testbed, initially by editing the files
>>        on the vm clone. After
>>        everything confiremd to be working, the build was successfully
>>        carried out and the
>>        .ipfire package was copied to a new vm clone installed and shown to
>>        perform as expected.
>>        This test only confirms that wsdd is correctly installed and
>>        started. Shutsdown and
>>        restarts on reboot successfully. Confirmed from the ps aux info that
>>        wsdd has been
>>        started with the correct options. Thge testing can not evaluate if
>>        wsdd enables windows
>>        systems newer than version 7 top be able to detect the samba shares
>>        as I have no
>>        windows systems.
>>        Fixes: Bug13445
>>        Tested-by: Adolf Belka <adolf.belka@ipfire.org
>>        <mailto:adolf.belka@ipfire.org>>
>>        Signed-off-by: Adolf Belka <adolf.belka@ipfire.org
>>        <mailto:adolf.belka@ipfire.org>>
>>        ---
>>        config/rootfiles/packages/wsdd | 2 +
>>        lfs/wsdd | 89 ++++++++++++++++++++++++++++++++++
>>        make.sh | 1 +
>>        src/initscripts/packages/wsdd | 63 ++++++++++++++++++++++++
>>        src/paks/wsdd/install.sh | 40 +++++++++++++++
>>        src/paks/wsdd/uninstall.sh | 30 ++++++++++++
>>        src/paks/wsdd/update.sh | 27 +++++++++++
>>        7 files changed, 252 insertions(+)
>>        create mode 100644 config/rootfiles/packages/wsdd
>>        create mode 100644 lfs/wsdd
>>        create mode 100644 src/initscripts/packages/wsdd
>>        create mode 100644 src/paks/wsdd/install.sh
>>        create mode 100644 src/paks/wsdd/uninstall.sh
>>        create mode 100644 src/paks/wsdd/update.sh
>>        diff --git a/config/rootfiles/packages/wsdd
>>        b/config/rootfiles/packages/wsdd
>>        new file mode 100644
>>        index 000000000..ce225043a
>>        --- /dev/null
>>        +++ b/config/rootfiles/packages/wsdd
>>        @@ -0,0 +1,2 @@
>>        +etc/rc.d/init.d/wsdd
>>        +usr/bin/wsdd
>>        diff --git a/lfs/wsdd b/lfs/wsdd
>>        new file mode 100644
>>        index 000000000..aa65e47ef
>>        --- /dev/null
>>        +++ b/lfs/wsdd
>>        @@ -0,0 +1,89 @@
>>        +###############################################################################
>>        +# #
>>        +# IPFire.org - A linux based firewall #
>>        +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org
>>        <mailto:info@ipfire.org>> #
>>        +# #
>>        +# This program is free software: you can redistribute it and/or
>>        modify #
>>        +# it under the terms of the GNU General Public License as published
>>        by #
>>        +# the Free Software Foundation, either version 3 of the
>>        License, or #
>>        +# (at your option) any later version. #
>>        +# #
>>        +# This program is distributed in the hope that it will be useful, #
>>        +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>        +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>        +# GNU General Public License for more details. #
>>        +# #
>>        +# You should have received a copy of the GNU General Public
>>        License #
>>        +# along with this program. If not, see
>>        <http://www.gnu.org/licenses/> <http://www.gnu.org/licenses/>>
>>        <http://www.gnu.org/licenses/>> <http://www.gnu.org/licenses/>>>. #
>>        +# #
>>        +###############################################################################
>>        +
>>        +###############################################################################
>>        +# Definitions
>>        +###############################################################################
>>        +
>>        +include Config
>>        +
>>        +VER = 0.7.1
>>        +SUMMARY = A Web Service Discovery host daemon.
>>        +
>>        +THISAPP = wsdd-$(VER)
>>        +DL_FILE = $(THISAPP).tar.gz
>>        +DL_FROM = $(URL_IPFIRE)
>>        +DIR_APP = $(DIR_SRC)/$(THISAPP)
>>        +TARGET = $(DIR_INFO)/$(THISAPP)
>>        +PROG = wsdd
>>        +PAK_VER = 1
>>        +
>>        +DEPS =
>>        +
>>        +SERVICES = wsdd
>>        +
>>        +###############################################################################
>>        +# Top-level Rules
>>        +###############################################################################
>>        +
>>        +objects = $(DL_FILE)
>>        +
>>        +$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>        +
>>        +$(DL_FILE)_BLAKE2 =
>>        ce43022c3bd9f7ff1fd7169ac0d5ab6b2ff78d35c221c05b2e20908a5772d563ab2aca571d4e6ae48a55d19d4adcb9cde60f720ae47af8ee950198224fcfdb26
>>        +
>>        +install : $(TARGET)
>>        +
>>        +check : $(patsubst %,$(DIR_CHK)/%,$(objects))
>>        +
>>        +download :$(patsubst %,$(DIR_DL)/%,$(objects))
>>        +
>>        +b2 : $(subst %,%_BLAKE2,$(objects))
>>        +
>>        +dist:
>>        + @$(PAK)
>>        +
>>        +###############################################################################
>>        +# Downloading, checking, b2sum
>>        +###############################################################################
>>        +
>>        +$(patsubst %,$(DIR_CHK)/%,$(objects)) :
>>        + @$(CHECK)
>>        +
>>        +$(patsubst %,$(DIR_DL)/%,$(objects)) :
>>        + @$(LOAD)
>>        +
>>        +$(subst %,%_BLAKE2,$(objects)) :
>>        + @$(B2SUM)
>>        +
>>        +###############################################################################
>>        +# Installation Details
>>        +###############################################################################
>>        +
>>        +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>        + @$(PREBUILD)
>>        + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf
>>        $(DIR_DL)/$(DL_FILE)
>>        + cd $(DIR_APP) && cp src/wsdd.py /usr/bin/wsdd
>>        +
>>        + #install initscripts
>>        + $(call INSTALL_INITSCRIPTS,$(SERVICES))
>>        +
>>        + @rm -rf $(DIR_APP)
>>        + @$(POSTBUILD)
>>        diff --git a/make.sh b/make.sh
>>        index 06e09c9a3..5af3dedc3 100755
>>        --- a/make.sh
>>        +++ b/make.sh
>>        @@ -1699,6 +1699,7 @@ buildipfire() {
>>        lfsmake2 perl-MIME-Base32
>>        lfsmake2 perl-URI-Encode
>>        lfsmake2 rsnapshot
>>        + lfsmake2 wsdd
>>        # Kernelbuild ... current we have no platform that need
>>        # multi kernel builds so KCFG is empty
>>        diff --git a/src/initscripts/packages/wsdd
>>        b/src/initscripts/packages/wsdd
>>        new file mode 100644
>>        index 000000000..c5207f872
>>        --- /dev/null
>>        +++ b/src/initscripts/packages/wsdd
>>        @@ -0,0 +1,63 @@
>>        +#!/bin/sh
>>        +###############################################################################
>>        +# #
>>        +# IPFire.org - A linux based firewall #
>>        +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org
>>        <mailto:info@ipfire.org>> #
>>        +# #
>>        +# This program is free software: you can redistribute it and/or
>>        modify #
>>        +# it under the terms of the GNU General Public License as published
>>        by #
>>        +# the Free Software Foundation, either version 3 of the
>>        License, or #
>>        +# (at your option) any later version. #
>>        +# #
>>        +# This program is distributed in the hope that it will be useful, #
>>        +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>        +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>        +# GNU General Public License for more details. #
>>        +# #
>>        +# You should have received a copy of the GNU General Public
>>        License #
>>        +# along with this program. If not, see
>>        <http://www.gnu.org/licenses/> <http://www.gnu.org/licenses/>>
>>        <http://www.gnu.org/licenses/>> <http://www.gnu.org/licenses/>>>. #
>>        +# #
>>        +###############################################################################
>>        +
>>        +. /etc/sysconfig/rc
>>        +. $rc_functions
>>        +
>>        +eval $(/usr/local/bin/readhash /var/ipfire/ethernet/settings)
>>        +
>>        +# Create chroot directory for wsdd
>>        +mkdir -p /var/run/wsdd
>>        +
>>        +INTERFACES="-i ${GREEN_DEV}"
>>        + if [ -n "${BLUE_DEV}" ]; then
>>        + INTERFACES="${INTERFACES} -i ${BLUE_DEV}"
>>        + fi
>>        +WSDD_WORKGROUP="-w $(/usr/bin/testparm -s --parameter-name
>>        workgroup 2>/dev/null)"
>>        +WSDD_USER="-u wsdd:wsdd"
>>        +WSDD_CHROOT="-c /var/run/wsdd"
>>        +
>>        +case "$1" in
>>        + start)
>>        + boot_mesg "Starting wsdd daemon..."
>>        + loadproc -b /usr/bin/wsdd -4 ${WSDD_USER} ${INTERFACES}
>>        ${WSDD_WORKGROUP} ${WSDD_CHROOT}
>>        + sleep 1
>>        + echo $(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk '{print
>>        $2}') > /var/run/wsdd/pid
>>        + ;;
>>        + stop)
>>        + boot_mesg "Stopping wsdd daemon..."
>>        + killproc -p /var/run/wsdd/pid /usr/bin/wsdd
>>        + ;;
>>        + status)
>>        + WSDD_PID=$(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk
>>        '{print $2}')
>>        + if [ -n "${WSDD_PID}" ]; then
>>        + echo -e "\\033[1;36m /usr/bin/wsdd is running with Process"\
>>        + "ID(s) $WSDD_PID.\\033[0;39m"
>>        + else
>>        + echo -e "\\033[1;36m /usr/bin/wsdd is not running.\\033[0;39m"
>>        + fi
>>        + ;;
>>        + *)
>>        + echo "Usage: $0 (start|stop|status)"
>>        + exit 1
>>        + ;;
>>        +esac
>>        +
>>        diff --git a/src/paks/wsdd/install.sh b/src/paks/wsdd/install.sh
>>        new file mode 100644
>>        index 000000000..181b84eb9
>>        --- /dev/null
>>        +++ b/src/paks/wsdd/install.sh
>>        @@ -0,0 +1,40 @@
>>        +#!/bin/bash
>>        +############################################################################
>>        +# #
>>        +# This file is part of the IPFire Firewall. #
>>        +# #
>>        +# IPFire is free software; you can redistribute it and/or modify #
>>        +# it under the terms of the GNU General Public License as published
>>        by #
>>        +# the Free Software Foundation; either version 2 of the
>>        License, or #
>>        +# (at your option) any later version. #
>>        +# #
>>        +# IPFire is distributed in the hope that it will be useful, #
>>        +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>        +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>        +# GNU General Public License for more details. #
>>        +# #
>>        +# You should have received a copy of the GNU General Public
>>        License #
>>        +# along with IPFire; if not, write to the Free Software #
>>        +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>        02111-1307 USA #
>>        +# #
>>        +# Copyright (C) 2007 IPFire-Team <info@ipfire.org
>>        <mailto:info@ipfire.org>>. #
>>        +# #
>>        +############################################################################
>>        +#
>>        +. /opt/pakfire/lib/functions.sh
>>        +
>>        +# If the wsdd user does not exist yet, then create it and add to
>>        wsdd group.
>>        +if ! getent user wsdd >/dev/null; then
>>        + useradd -r -U -d / -s /bin/false -c "wsdd user" wsdd
>>        + usermod -a -G wsdd wsdd
>>        +fi
>>        +
>>        +extract_files
>>        +restore_backup ${NAME}
>>        +
>>        +# Create startlinks
>>        +ln -sf ../init.d/wsdd /etc/rc.d/rc0.d/K35wsdd
>>        +ln -sf ../init.d/wsdd /etc/rc.d/rc3.d/S65wsdd
>>        +ln -sf ../init.d/wsdd /etc/rc.d/rc6.d/K35wsdd
>>        +start_service ${NAME}
>>        +exit 0
>>        diff --git a/src/paks/wsdd/uninstall.sh b/src/paks/wsdd/uninstall.sh
>>        new file mode 100644
>>        index 000000000..4c52ee281
>>        --- /dev/null
>>        +++ b/src/paks/wsdd/uninstall.sh
>>        @@ -0,0 +1,30 @@
>>        +#!/bin/bash
>>        +############################################################################
>>        +# #
>>        +# This file is part of the IPFire Firewall. #
>>        +# #
>>        +# IPFire is free software; you can redistribute it and/or modify #
>>        +# it under the terms of the GNU General Public License as published
>>        by #
>>        +# the Free Software Foundation; either version 2 of the
>>        License, or #
>>        +# (at your option) any later version. #
>>        +# #
>>        +# IPFire is distributed in the hope that it will be useful, #
>>        +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>        +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>        +# GNU General Public License for more details. #
>>        +# #
>>        +# You should have received a copy of the GNU General Public
>>        License #
>>        +# along with IPFire; if not, write to the Free Software #
>>        +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>        02111-1307 USA #
>>        +# #
>>        +# Copyright (C) 2007 IPFire-Team <info@ipfire.org
>>        <mailto:info@ipfire.org>>. #
>>        +# #
>>        +############################################################################
>>        +#
>>        +. /opt/pakfire/lib/functions.sh
>>        +stop_service ${NAME}
>>        +make_backup ${NAME}
>>        +remove_files
>>        +# Remove all start links.
>>        +rm -rf /etc/rc.d/rc*.d/*wsdd
>>        +exit 0
>>        diff --git a/src/paks/wsdd/update.sh b/src/paks/wsdd/update.sh
>>        new file mode 100644
>>        index 000000000..99776659c
>>        --- /dev/null
>>        +++ b/src/paks/wsdd/update.sh
>>        @@ -0,0 +1,27 @@
>>        +#!/bin/bash
>>        +############################################################################
>>        +# #
>>        +# This file is part of the IPFire Firewall. #
>>        +# #
>>        +# IPFire is free software; you can redistribute it and/or modify #
>>        +# it under the terms of the GNU General Public License as published
>>        by #
>>        +# the Free Software Foundation; either version 2 of the
>>        License, or #
>>        +# (at your option) any later version. #
>>        +# #
>>        +# IPFire is distributed in the hope that it will be useful, #
>>        +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>        +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>        +# GNU General Public License for more details. #
>>        +# #
>>        +# You should have received a copy of the GNU General Public
>>        License #
>>        +# along with IPFire; if not, write to the Free Software #
>>        +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>        02111-1307 USA #
>>        +# #
>>        +# Copyright (C) 2007-2020 IPFire-Team <info@ipfire.org
>>        <mailto:info@ipfire.org>>. #
>>        +# #
>>        +############################################################################
>>        +#
>>        +. /opt/pakfire/lib/functions.sh
>>        +extract_backup_includes
>>        +./uninstall.sh
>>        +./install.sh
>>        -- 2.43.0
>>            -- >> Sent from my laptop
>>    -- Sent from my laptop
> 
> -- 
> Sent from my laptop
  

Hi Michael,

On 28/02/2024 17:45, Michael Tremer wrote:
> Hello Adolf,
> 
>> On 16 Feb 2024, at 17:15, Adolf Belka <adolf.belka@ipfire.org> wrote:
>>
>> Hi Michael,
>>
>> On 16/01/2024 11:30, daniel.weismueller@ipfire.org wrote:
>>> Hi there.
>>> I've installed and testetd the latest / modified version of the wsdd addon on two machines.
>>> Nearly everything works as exspected. Also my Winodws PCs see the IPFIRE as a menber of the workgroup and could browse and use the samba shares.
>>> If you use the firewall option "Drop all Microsoft ports 135,137,138,139,445,1025" the clients in the blue network see the IPFIRE but aren't able to browse or connect to the shares.
>>> I've recogniced only one thing that don't work like I exspected.
>>> - If you stop or restart samba the wsdd addon won't stop or restart, too.
>>> I think it would be better if the wssd stop too because if you change the workgroup and start the samba again the wsdd won't recognice it.
>>
>> To make a patch to support this I need to have the wsdd patches that you created merged into next. Then I can work on having samba trigger the start and stop of wsdd so that it does not run independently but is synchronised with samba.
> 
> Okay, I have merged the wsdd branch into next.
> 
> Please let me know if there is anything else you need from me.
Thanks for the merge. Ran unstable on a vm system but wsdd failed to start. After a bit of investigating I realised that it was the same issue I had originally of pid not being correctly created.

You also need to merge the two patches in your initscripts branch. I manually added the two patch changes into the functions file in my vm system and then wsdd started without any problems. So I can do the work on linking the start of samba with wsdd but those two patches will be needed for CU185.

Regards,
Adolf.
> 
>> Regards,
>> Adolf.
>>
>>> -
>>> Daniel
>>> Am 12. Januar 2024 um 16:09 schrieb "Adolf Belka" <adolf.belka@ipfire.org<mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf.belka%40ipfire.org%3E>>:
>>>     Hi Michael,
>>>     On 12/01/2024 14:40, Michael Tremer wrote:
>>>         Hello,
>>>         On 12 Jan 2024, at 11:14, Adolf Belka <adolf.belka@ipfire.org
>>>         <mailto:adolf.belka@ipfire.org>> wrote:
>>>             Hi Daniel,
>>>             On 11/01/2024 17:11, daniel.weismueller@ipfire.org
>>>             <mailto:daniel.weismueller@ipfire.org> wrote:
>>>         Hi Adolf.
>>>         We have looked at your work. First of all, thank you very much.
>>>         Your scripts seems to work fine. I will start tomorrow to test
>>>         them in whole. However we have made a few changes.
>>>         In particular, we have adapted the code to the existing code in
>>>         IPFire.
>>>         Please take look at Michaels wsdd branch.
>>>         https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd> <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd> <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd>>
>>>             That looks very good. I clearly still have a bit to learn
>>>             about how to code in a more tidy manner.
>>>         It worked… I was just in the swing of it :)
>>>         I also see that Michael fixed the pid fault in the
>>>         loadproc/statusproc/killproc while I just created a workaround
>>>         solution for the wsdd initscript alone.
>>>         loadproc/statusproc/killproc are really difficult to handle.
>>>         They are supposed to be LSB-conformant functions, but I believe
>>>         that it never really happened that they because universally used
>>>         and compatible between distributions. Now with systemd, there is
>>>         no more need…
>>>         And it is also because of systemd that daemons behave
>>>         differently now - actually not even like daemons whatsoever any
>>>         more. They used to fork themselves into the background which
>>>         made all the PID processing necessary, because the init script
>>>         could not know the PID of the process forked in the background.
>>>         Now, they don’t do this any more because without the fork,
>>>         things are easier for systemd to manage.
>>>         The new -b switch that was added some while ago is already
>>>         helping us to launch such new processes into the background, but
>>>         we don’t have PID files any more. And since scripts don’t work
>>>         with statusproc/killproc, I thought it might be a good idea to
>>>         add this to loadproc as I am expecting us to need this more
>>>         often in the future.
>>>         And while I was thinking about the problem, I figured it would
>>>         be easier to send a patch for those few lines instead of
>>>         explaining it in words - which probably would have been a little
>>>         bit longer.
>>>         The only noteworthy thing is that there was a potential security
>>>         issue in passing around the shell arguments as strings because
>>>         the workgroup variable could have been almost anything. I am not
>>>         sure what validation samba would do, but I thought it would be
>>>         best not to rely on that. A two words (with a space) workgroup
>>>         would have caused wsdd not to start, because it would have seen
>>>         a command line like “—-workgroup ABC DEF” with ABC being
>>>         interpreted as the workgroup and DEF being some garbage that
>>>         wsdd would not understand. The trick with the array is that it
>>>         would pass the arguments like this “—-workgroup ‘ABC DEF’” which
>>>         prevents that “DEF” would be interpreted as an extra parameter.
>>>         So, everything is fine :) Especially after I added the “restart”
>>>         command :)
>>>         I did have a look at the code in the functions file but
>>>         struggled to understand it enough to be able to figure out what
>>>         was giving the problem I was experiencing.
>>>         Which functions?
>>>     The /src/initscripts/system/functions file from the git repo that
>>>     has the loadproc, statusproc and killproc functions in it.
>>>     Regards,
>>>     Adolf.
>>>         I am glad that has been sorted and the initscript tidied up in
>>>         line with IPFire coding style.
>>>         That is why we are all working together...
>>>         Will try and remember that in future.
>>>         If not, we are here to help :)
>>>         -Michael
>>>         Regards,
>>>             Adolf.
>>>         -
>>>         Daniel
>>>         Am 10. Januar 2024 um 14:30 schrieb "Adolf Belka"
>>>         <adolf.belka@ipfire.org <mailto:adolf.belka@ipfire.org>
>>>         <mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf
>>>         <mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf>.belka%40ipfire.org%3E>>:
>>>         - lfs and toorfile created for wsdd
>>>         - wsdd added to make.sh script
>>>         - created install/update/uninstall scripts for wsdd that create an
>>>         unpriveleged user and
>>>         group.
>>>         - initscript created for wsdd. As wsdd is a python3 script, when it
>>>         is run as a daemon the
>>>         pidof command does not find any pid for wsdd. So a directory/file
>>>         for a pid file was
>>>         created. This is then passed to the loadproc and killproc commands.
>>>         After the loadproc
>>>         command has been created the pid is extracted from the ps aux
>>>         command and put into the
>>>         pid file. This then works when running the killproc command for it
>>>         to know what to go
>>>         and stop. The statusproc command does not have the ability to feed
>>>         in the pid from a
>>>         pid file and so it fails to find a running wsdd as it uses the pidof
>>>         command. Code was
>>>         added to the status section of the initscript to check if the pid
>>>         file exists and if so
>>>         to print the same command as used with the statusproc command, and
>>>         also the same
>>>         wording if the pid file does not exist because wsdd is not running.
>>>         - info from the ethernet/settings file is used to identify if only
>>>         green0 is available or
>>>         if blue0 is also used and based on this the appropriate interface
>>>         commands are added to
>>>         the wsdd command.
>>>         - wsdd is also set up to run in a chroot
>>>         - Has been tested on my vm testbed, initially by editing the files
>>>         on the vm clone. After
>>>         everything confiremd to be working, the build was successfully
>>>         carried out and the
>>>         .ipfire package was copied to a new vm clone installed and shown to
>>>         perform as expected.
>>>         This test only confirms that wsdd is correctly installed and
>>>         started. Shutsdown and
>>>         restarts on reboot successfully. Confirmed from the ps aux info that
>>>         wsdd has been
>>>         started with the correct options. Thge testing can not evaluate if
>>>         wsdd enables windows
>>>         systems newer than version 7 top be able to detect the samba shares
>>>         as I have no
>>>         windows systems.
>>>         Fixes: Bug13445
>>>         Tested-by: Adolf Belka <adolf.belka@ipfire.org
>>>         <mailto:adolf.belka@ipfire.org>>
>>>         Signed-off-by: Adolf Belka <adolf.belka@ipfire.org
>>>         <mailto:adolf.belka@ipfire.org>>
>>>         ---
>>>         config/rootfiles/packages/wsdd | 2 +
>>>         lfs/wsdd | 89 ++++++++++++++++++++++++++++++++++
>>>         make.sh | 1 +
>>>         src/initscripts/packages/wsdd | 63 ++++++++++++++++++++++++
>>>         src/paks/wsdd/install.sh | 40 +++++++++++++++
>>>         src/paks/wsdd/uninstall.sh | 30 ++++++++++++
>>>         src/paks/wsdd/update.sh | 27 +++++++++++
>>>         7 files changed, 252 insertions(+)
>>>         create mode 100644 config/rootfiles/packages/wsdd
>>>         create mode 100644 lfs/wsdd
>>>         create mode 100644 src/initscripts/packages/wsdd
>>>         create mode 100644 src/paks/wsdd/install.sh
>>>         create mode 100644 src/paks/wsdd/uninstall.sh
>>>         create mode 100644 src/paks/wsdd/update.sh
>>>         diff --git a/config/rootfiles/packages/wsdd
>>>         b/config/rootfiles/packages/wsdd
>>>         new file mode 100644
>>>         index 000000000..ce225043a
>>>         --- /dev/null
>>>         +++ b/config/rootfiles/packages/wsdd
>>>         @@ -0,0 +1,2 @@
>>>         +etc/rc.d/init.d/wsdd
>>>         +usr/bin/wsdd
>>>         diff --git a/lfs/wsdd b/lfs/wsdd
>>>         new file mode 100644
>>>         index 000000000..aa65e47ef
>>>         --- /dev/null
>>>         +++ b/lfs/wsdd
>>>         @@ -0,0 +1,89 @@
>>>         +###############################################################################
>>>         +# #
>>>         +# IPFire.org - A linux based firewall #
>>>         +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org
>>>         <mailto:info@ipfire.org>> #
>>>         +# #
>>>         +# This program is free software: you can redistribute it and/or
>>>         modify #
>>>         +# it under the terms of the GNU General Public License as published
>>>         by #
>>>         +# the Free Software Foundation, either version 3 of the
>>>         License, or #
>>>         +# (at your option) any later version. #
>>>         +# #
>>>         +# This program is distributed in the hope that it will be useful, #
>>>         +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>         +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>         +# GNU General Public License for more details. #
>>>         +# #
>>>         +# You should have received a copy of the GNU General Public
>>>         License #
>>>         +# along with this program. If not, see
>>>         <http://www.gnu.org/licenses/> <http://www.gnu.org/licenses/>>
>>>         <http://www.gnu.org/licenses/>> <http://www.gnu.org/licenses/>>>. #
>>>         +# #
>>>         +###############################################################################
>>>         +
>>>         +###############################################################################
>>>         +# Definitions
>>>         +###############################################################################
>>>         +
>>>         +include Config
>>>         +
>>>         +VER = 0.7.1
>>>         +SUMMARY = A Web Service Discovery host daemon.
>>>         +
>>>         +THISAPP = wsdd-$(VER)
>>>         +DL_FILE = $(THISAPP).tar.gz
>>>         +DL_FROM = $(URL_IPFIRE)
>>>         +DIR_APP = $(DIR_SRC)/$(THISAPP)
>>>         +TARGET = $(DIR_INFO)/$(THISAPP)
>>>         +PROG = wsdd
>>>         +PAK_VER = 1
>>>         +
>>>         +DEPS =
>>>         +
>>>         +SERVICES = wsdd
>>>         +
>>>         +###############################################################################
>>>         +# Top-level Rules
>>>         +###############################################################################
>>>         +
>>>         +objects = $(DL_FILE)
>>>         +
>>>         +$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>>         +
>>>         +$(DL_FILE)_BLAKE2 =
>>>         ce43022c3bd9f7ff1fd7169ac0d5ab6b2ff78d35c221c05b2e20908a5772d563ab2aca571d4e6ae48a55d19d4adcb9cde60f720ae47af8ee950198224fcfdb26
>>>         +
>>>         +install : $(TARGET)
>>>         +
>>>         +check : $(patsubst %,$(DIR_CHK)/%,$(objects))
>>>         +
>>>         +download :$(patsubst %,$(DIR_DL)/%,$(objects))
>>>         +
>>>         +b2 : $(subst %,%_BLAKE2,$(objects))
>>>         +
>>>         +dist:
>>>         + @$(PAK)
>>>         +
>>>         +###############################################################################
>>>         +# Downloading, checking, b2sum
>>>         +###############################################################################
>>>         +
>>>         +$(patsubst %,$(DIR_CHK)/%,$(objects)) :
>>>         + @$(CHECK)
>>>         +
>>>         +$(patsubst %,$(DIR_DL)/%,$(objects)) :
>>>         + @$(LOAD)
>>>         +
>>>         +$(subst %,%_BLAKE2,$(objects)) :
>>>         + @$(B2SUM)
>>>         +
>>>         +###############################################################################
>>>         +# Installation Details
>>>         +###############################################################################
>>>         +
>>>         +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>>         + @$(PREBUILD)
>>>         + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf
>>>         $(DIR_DL)/$(DL_FILE)
>>>         + cd $(DIR_APP) && cp src/wsdd.py /usr/bin/wsdd
>>>         +
>>>         + #install initscripts
>>>         + $(call INSTALL_INITSCRIPTS,$(SERVICES))
>>>         +
>>>         + @rm -rf $(DIR_APP)
>>>         + @$(POSTBUILD)
>>>         diff --git a/make.sh b/make.sh
>>>         index 06e09c9a3..5af3dedc3 100755
>>>         --- a/make.sh
>>>         +++ b/make.sh
>>>         @@ -1699,6 +1699,7 @@ buildipfire() {
>>>         lfsmake2 perl-MIME-Base32
>>>         lfsmake2 perl-URI-Encode
>>>         lfsmake2 rsnapshot
>>>         + lfsmake2 wsdd
>>>         # Kernelbuild ... current we have no platform that need
>>>         # multi kernel builds so KCFG is empty
>>>         diff --git a/src/initscripts/packages/wsdd
>>>         b/src/initscripts/packages/wsdd
>>>         new file mode 100644
>>>         index 000000000..c5207f872
>>>         --- /dev/null
>>>         +++ b/src/initscripts/packages/wsdd
>>>         @@ -0,0 +1,63 @@
>>>         +#!/bin/sh
>>>         +###############################################################################
>>>         +# #
>>>         +# IPFire.org - A linux based firewall #
>>>         +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org
>>>         <mailto:info@ipfire.org>> #
>>>         +# #
>>>         +# This program is free software: you can redistribute it and/or
>>>         modify #
>>>         +# it under the terms of the GNU General Public License as published
>>>         by #
>>>         +# the Free Software Foundation, either version 3 of the
>>>         License, or #
>>>         +# (at your option) any later version. #
>>>         +# #
>>>         +# This program is distributed in the hope that it will be useful, #
>>>         +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>         +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>         +# GNU General Public License for more details. #
>>>         +# #
>>>         +# You should have received a copy of the GNU General Public
>>>         License #
>>>         +# along with this program. If not, see
>>>         <http://www.gnu.org/licenses/> <http://www.gnu.org/licenses/>>
>>>         <http://www.gnu.org/licenses/>> <http://www.gnu.org/licenses/>>>. #
>>>         +# #
>>>         +###############################################################################
>>>         +
>>>         +. /etc/sysconfig/rc
>>>         +. $rc_functions
>>>         +
>>>         +eval $(/usr/local/bin/readhash /var/ipfire/ethernet/settings)
>>>         +
>>>         +# Create chroot directory for wsdd
>>>         +mkdir -p /var/run/wsdd
>>>         +
>>>         +INTERFACES="-i ${GREEN_DEV}"
>>>         + if [ -n "${BLUE_DEV}" ]; then
>>>         + INTERFACES="${INTERFACES} -i ${BLUE_DEV}"
>>>         + fi
>>>         +WSDD_WORKGROUP="-w $(/usr/bin/testparm -s --parameter-name
>>>         workgroup 2>/dev/null)"
>>>         +WSDD_USER="-u wsdd:wsdd"
>>>         +WSDD_CHROOT="-c /var/run/wsdd"
>>>         +
>>>         +case "$1" in
>>>         + start)
>>>         + boot_mesg "Starting wsdd daemon..."
>>>         + loadproc -b /usr/bin/wsdd -4 ${WSDD_USER} ${INTERFACES}
>>>         ${WSDD_WORKGROUP} ${WSDD_CHROOT}
>>>         + sleep 1
>>>         + echo $(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk '{print
>>>         $2}') > /var/run/wsdd/pid
>>>         + ;;
>>>         + stop)
>>>         + boot_mesg "Stopping wsdd daemon..."
>>>         + killproc -p /var/run/wsdd/pid /usr/bin/wsdd
>>>         + ;;
>>>         + status)
>>>         + WSDD_PID=$(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk
>>>         '{print $2}')
>>>         + if [ -n "${WSDD_PID}" ]; then
>>>         + echo -e "\\033[1;36m /usr/bin/wsdd is running with Process"\
>>>         + "ID(s) $WSDD_PID.\\033[0;39m"
>>>         + else
>>>         + echo -e "\\033[1;36m /usr/bin/wsdd is not running.\\033[0;39m"
>>>         + fi
>>>         + ;;
>>>         + *)
>>>         + echo "Usage: $0 (start|stop|status)"
>>>         + exit 1
>>>         + ;;
>>>         +esac
>>>         +
>>>         diff --git a/src/paks/wsdd/install.sh b/src/paks/wsdd/install.sh
>>>         new file mode 100644
>>>         index 000000000..181b84eb9
>>>         --- /dev/null
>>>         +++ b/src/paks/wsdd/install.sh
>>>         @@ -0,0 +1,40 @@
>>>         +#!/bin/bash
>>>         +############################################################################
>>>         +# #
>>>         +# This file is part of the IPFire Firewall. #
>>>         +# #
>>>         +# IPFire is free software; you can redistribute it and/or modify #
>>>         +# it under the terms of the GNU General Public License as published
>>>         by #
>>>         +# the Free Software Foundation; either version 2 of the
>>>         License, or #
>>>         +# (at your option) any later version. #
>>>         +# #
>>>         +# IPFire is distributed in the hope that it will be useful, #
>>>         +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>         +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>         +# GNU General Public License for more details. #
>>>         +# #
>>>         +# You should have received a copy of the GNU General Public
>>>         License #
>>>         +# along with IPFire; if not, write to the Free Software #
>>>         +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>>         02111-1307 USA #
>>>         +# #
>>>         +# Copyright (C) 2007 IPFire-Team <info@ipfire.org
>>>         <mailto:info@ipfire.org>>. #
>>>         +# #
>>>         +############################################################################
>>>         +#
>>>         +. /opt/pakfire/lib/functions.sh
>>>         +
>>>         +# If the wsdd user does not exist yet, then create it and add to
>>>         wsdd group.
>>>         +if ! getent user wsdd >/dev/null; then
>>>         + useradd -r -U -d / -s /bin/false -c "wsdd user" wsdd
>>>         + usermod -a -G wsdd wsdd
>>>         +fi
>>>         +
>>>         +extract_files
>>>         +restore_backup ${NAME}
>>>         +
>>>         +# Create startlinks
>>>         +ln -sf ../init.d/wsdd /etc/rc.d/rc0.d/K35wsdd
>>>         +ln -sf ../init.d/wsdd /etc/rc.d/rc3.d/S65wsdd
>>>         +ln -sf ../init.d/wsdd /etc/rc.d/rc6.d/K35wsdd
>>>         +start_service ${NAME}
>>>         +exit 0
>>>         diff --git a/src/paks/wsdd/uninstall.sh b/src/paks/wsdd/uninstall.sh
>>>         new file mode 100644
>>>         index 000000000..4c52ee281
>>>         --- /dev/null
>>>         +++ b/src/paks/wsdd/uninstall.sh
>>>         @@ -0,0 +1,30 @@
>>>         +#!/bin/bash
>>>         +############################################################################
>>>         +# #
>>>         +# This file is part of the IPFire Firewall. #
>>>         +# #
>>>         +# IPFire is free software; you can redistribute it and/or modify #
>>>         +# it under the terms of the GNU General Public License as published
>>>         by #
>>>         +# the Free Software Foundation; either version 2 of the
>>>         License, or #
>>>         +# (at your option) any later version. #
>>>         +# #
>>>         +# IPFire is distributed in the hope that it will be useful, #
>>>         +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>         +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>         +# GNU General Public License for more details. #
>>>         +# #
>>>         +# You should have received a copy of the GNU General Public
>>>         License #
>>>         +# along with IPFire; if not, write to the Free Software #
>>>         +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>>         02111-1307 USA #
>>>         +# #
>>>         +# Copyright (C) 2007 IPFire-Team <info@ipfire.org
>>>         <mailto:info@ipfire.org>>. #
>>>         +# #
>>>         +############################################################################
>>>         +#
>>>         +. /opt/pakfire/lib/functions.sh
>>>         +stop_service ${NAME}
>>>         +make_backup ${NAME}
>>>         +remove_files
>>>         +# Remove all start links.
>>>         +rm -rf /etc/rc.d/rc*.d/*wsdd
>>>         +exit 0
>>>         diff --git a/src/paks/wsdd/update.sh b/src/paks/wsdd/update.sh
>>>         new file mode 100644
>>>         index 000000000..99776659c
>>>         --- /dev/null
>>>         +++ b/src/paks/wsdd/update.sh
>>>         @@ -0,0 +1,27 @@
>>>         +#!/bin/bash
>>>         +############################################################################
>>>         +# #
>>>         +# This file is part of the IPFire Firewall. #
>>>         +# #
>>>         +# IPFire is free software; you can redistribute it and/or modify #
>>>         +# it under the terms of the GNU General Public License as published
>>>         by #
>>>         +# the Free Software Foundation; either version 2 of the
>>>         License, or #
>>>         +# (at your option) any later version. #
>>>         +# #
>>>         +# IPFire is distributed in the hope that it will be useful, #
>>>         +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>         +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>         +# GNU General Public License for more details. #
>>>         +# #
>>>         +# You should have received a copy of the GNU General Public
>>>         License #
>>>         +# along with IPFire; if not, write to the Free Software #
>>>         +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>>         02111-1307 USA #
>>>         +# #
>>>         +# Copyright (C) 2007-2020 IPFire-Team <info@ipfire.org
>>>         <mailto:info@ipfire.org>>. #
>>>         +# #
>>>         +############################################################################
>>>         +#
>>>         +. /opt/pakfire/lib/functions.sh
>>>         +extract_backup_includes
>>>         +./uninstall.sh
>>>         +./install.sh
>>>         -- 2.43.0
>>>             -- >> Sent from my laptop
>>>     -- Sent from my laptop
>>
>> -- 
>> Sent from my laptop
> 
>
  

Thank you for the notice. I merged the initscripts branch, too!

-Michael

> On 29 Feb 2024, at 14:38, Adolf Belka <adolf.belka@ipfire.org> wrote:
> 
> Hi Michael,
> 
> On 28/02/2024 17:45, Michael Tremer wrote:
>> Hello Adolf,
>>> On 16 Feb 2024, at 17:15, Adolf Belka <adolf.belka@ipfire.org> wrote:
>>> 
>>> Hi Michael,
>>> 
>>> On 16/01/2024 11:30, daniel.weismueller@ipfire.org wrote:
>>>> Hi there.
>>>> I've installed and testetd the latest / modified version of the wsdd addon on two machines.
>>>> Nearly everything works as exspected. Also my Winodws PCs see the IPFIRE as a menber of the workgroup and could browse and use the samba shares.
>>>> If you use the firewall option "Drop all Microsoft ports 135,137,138,139,445,1025" the clients in the blue network see the IPFIRE but aren't able to browse or connect to the shares.
>>>> I've recogniced only one thing that don't work like I exspected.
>>>> - If you stop or restart samba the wsdd addon won't stop or restart, too.
>>>> I think it would be better if the wssd stop too because if you change the workgroup and start the samba again the wsdd won't recognice it.
>>> 
>>> To make a patch to support this I need to have the wsdd patches that you created merged into next. Then I can work on having samba trigger the start and stop of wsdd so that it does not run independently but is synchronised with samba.
>> Okay, I have merged the wsdd branch into next.
>> Please let me know if there is anything else you need from me.
> Thanks for the merge. Ran unstable on a vm system but wsdd failed to start. After a bit of investigating I realised that it was the same issue I had originally of pid not being correctly created.
> 
> You also need to merge the two patches in your initscripts branch. I manually added the two patch changes into the functions file in my vm system and then wsdd started without any problems. So I can do the work on linking the start of samba with wsdd but those two patches will be needed for CU185.
> 
> Regards,
> Adolf.
>>> Regards,
>>> Adolf.
>>> 
>>>> -
>>>> Daniel
>>>> Am 12. Januar 2024 um 16:09 schrieb "Adolf Belka" <adolf.belka@ipfire.org<mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf.belka%40ipfire.org%3E>>:
>>>>    Hi Michael,
>>>>    On 12/01/2024 14:40, Michael Tremer wrote:
>>>>        Hello,
>>>>        On 12 Jan 2024, at 11:14, Adolf Belka <adolf.belka@ipfire.org
>>>>        <mailto:adolf.belka@ipfire.org>> wrote:
>>>>            Hi Daniel,
>>>>            On 11/01/2024 17:11, daniel.weismueller@ipfire.org
>>>>            <mailto:daniel.weismueller@ipfire.org> wrote:
>>>>        Hi Adolf.
>>>>        We have looked at your work. First of all, thank you very much.
>>>>        Your scripts seems to work fine. I will start tomorrow to test
>>>>        them in whole. However we have made a few changes.
>>>>        In particular, we have adapted the code to the existing code in
>>>>        IPFire.
>>>>        Please take look at Michaels wsdd branch.
>>>>        https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd> <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd> <https://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/wsdd>>
>>>>            That looks very good. I clearly still have a bit to learn
>>>>            about how to code in a more tidy manner.
>>>>        It worked… I was just in the swing of it :)
>>>>        I also see that Michael fixed the pid fault in the
>>>>        loadproc/statusproc/killproc while I just created a workaround
>>>>        solution for the wsdd initscript alone.
>>>>        loadproc/statusproc/killproc are really difficult to handle.
>>>>        They are supposed to be LSB-conformant functions, but I believe
>>>>        that it never really happened that they because universally used
>>>>        and compatible between distributions. Now with systemd, there is
>>>>        no more need…
>>>>        And it is also because of systemd that daemons behave
>>>>        differently now - actually not even like daemons whatsoever any
>>>>        more. They used to fork themselves into the background which
>>>>        made all the PID processing necessary, because the init script
>>>>        could not know the PID of the process forked in the background.
>>>>        Now, they don’t do this any more because without the fork,
>>>>        things are easier for systemd to manage.
>>>>        The new -b switch that was added some while ago is already
>>>>        helping us to launch such new processes into the background, but
>>>>        we don’t have PID files any more. And since scripts don’t work
>>>>        with statusproc/killproc, I thought it might be a good idea to
>>>>        add this to loadproc as I am expecting us to need this more
>>>>        often in the future.
>>>>        And while I was thinking about the problem, I figured it would
>>>>        be easier to send a patch for those few lines instead of
>>>>        explaining it in words - which probably would have been a little
>>>>        bit longer.
>>>>        The only noteworthy thing is that there was a potential security
>>>>        issue in passing around the shell arguments as strings because
>>>>        the workgroup variable could have been almost anything. I am not
>>>>        sure what validation samba would do, but I thought it would be
>>>>        best not to rely on that. A two words (with a space) workgroup
>>>>        would have caused wsdd not to start, because it would have seen
>>>>        a command line like “—-workgroup ABC DEF” with ABC being
>>>>        interpreted as the workgroup and DEF being some garbage that
>>>>        wsdd would not understand. The trick with the array is that it
>>>>        would pass the arguments like this “—-workgroup ‘ABC DEF’” which
>>>>        prevents that “DEF” would be interpreted as an extra parameter.
>>>>        So, everything is fine :) Especially after I added the “restart”
>>>>        command :)
>>>>        I did have a look at the code in the functions file but
>>>>        struggled to understand it enough to be able to figure out what
>>>>        was giving the problem I was experiencing.
>>>>        Which functions?
>>>>    The /src/initscripts/system/functions file from the git repo that
>>>>    has the loadproc, statusproc and killproc functions in it.
>>>>    Regards,
>>>>    Adolf.
>>>>        I am glad that has been sorted and the initscript tidied up in
>>>>        line with IPFire coding style.
>>>>        That is why we are all working together...
>>>>        Will try and remember that in future.
>>>>        If not, we are here to help :)
>>>>        -Michael
>>>>        Regards,
>>>>            Adolf.
>>>>        -
>>>>        Daniel
>>>>        Am 10. Januar 2024 um 14:30 schrieb "Adolf Belka"
>>>>        <adolf.belka@ipfire.org <mailto:adolf.belka@ipfire.org>
>>>>        <mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf
>>>>        <mailto:adolf.belka@ipfire.org?to=%22Adolf%20Belka%22%20%3Cadolf>.belka%40ipfire.org%3E>>:
>>>>        - lfs and toorfile created for wsdd
>>>>        - wsdd added to make.sh script
>>>>        - created install/update/uninstall scripts for wsdd that create an
>>>>        unpriveleged user and
>>>>        group.
>>>>        - initscript created for wsdd. As wsdd is a python3 script, when it
>>>>        is run as a daemon the
>>>>        pidof command does not find any pid for wsdd. So a directory/file
>>>>        for a pid file was
>>>>        created. This is then passed to the loadproc and killproc commands.
>>>>        After the loadproc
>>>>        command has been created the pid is extracted from the ps aux
>>>>        command and put into the
>>>>        pid file. This then works when running the killproc command for it
>>>>        to know what to go
>>>>        and stop. The statusproc command does not have the ability to feed
>>>>        in the pid from a
>>>>        pid file and so it fails to find a running wsdd as it uses the pidof
>>>>        command. Code was
>>>>        added to the status section of the initscript to check if the pid
>>>>        file exists and if so
>>>>        to print the same command as used with the statusproc command, and
>>>>        also the same
>>>>        wording if the pid file does not exist because wsdd is not running.
>>>>        - info from the ethernet/settings file is used to identify if only
>>>>        green0 is available or
>>>>        if blue0 is also used and based on this the appropriate interface
>>>>        commands are added to
>>>>        the wsdd command.
>>>>        - wsdd is also set up to run in a chroot
>>>>        - Has been tested on my vm testbed, initially by editing the files
>>>>        on the vm clone. After
>>>>        everything confiremd to be working, the build was successfully
>>>>        carried out and the
>>>>        .ipfire package was copied to a new vm clone installed and shown to
>>>>        perform as expected.
>>>>        This test only confirms that wsdd is correctly installed and
>>>>        started. Shutsdown and
>>>>        restarts on reboot successfully. Confirmed from the ps aux info that
>>>>        wsdd has been
>>>>        started with the correct options. Thge testing can not evaluate if
>>>>        wsdd enables windows
>>>>        systems newer than version 7 top be able to detect the samba shares
>>>>        as I have no
>>>>        windows systems.
>>>>        Fixes: Bug13445
>>>>        Tested-by: Adolf Belka <adolf.belka@ipfire.org
>>>>        <mailto:adolf.belka@ipfire.org>>
>>>>        Signed-off-by: Adolf Belka <adolf.belka@ipfire.org
>>>>        <mailto:adolf.belka@ipfire.org>>
>>>>        ---
>>>>        config/rootfiles/packages/wsdd | 2 +
>>>>        lfs/wsdd | 89 ++++++++++++++++++++++++++++++++++
>>>>        make.sh | 1 +
>>>>        src/initscripts/packages/wsdd | 63 ++++++++++++++++++++++++
>>>>        src/paks/wsdd/install.sh | 40 +++++++++++++++
>>>>        src/paks/wsdd/uninstall.sh | 30 ++++++++++++
>>>>        src/paks/wsdd/update.sh | 27 +++++++++++
>>>>        7 files changed, 252 insertions(+)
>>>>        create mode 100644 config/rootfiles/packages/wsdd
>>>>        create mode 100644 lfs/wsdd
>>>>        create mode 100644 src/initscripts/packages/wsdd
>>>>        create mode 100644 src/paks/wsdd/install.sh
>>>>        create mode 100644 src/paks/wsdd/uninstall.sh
>>>>        create mode 100644 src/paks/wsdd/update.sh
>>>>        diff --git a/config/rootfiles/packages/wsdd
>>>>        b/config/rootfiles/packages/wsdd
>>>>        new file mode 100644
>>>>        index 000000000..ce225043a
>>>>        --- /dev/null
>>>>        +++ b/config/rootfiles/packages/wsdd
>>>>        @@ -0,0 +1,2 @@
>>>>        +etc/rc.d/init.d/wsdd
>>>>        +usr/bin/wsdd
>>>>        diff --git a/lfs/wsdd b/lfs/wsdd
>>>>        new file mode 100644
>>>>        index 000000000..aa65e47ef
>>>>        --- /dev/null
>>>>        +++ b/lfs/wsdd
>>>>        @@ -0,0 +1,89 @@
>>>>        +###############################################################################
>>>>        +# #
>>>>        +# IPFire.org - A linux based firewall #
>>>>        +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org
>>>>        <mailto:info@ipfire.org>> #
>>>>        +# #
>>>>        +# This program is free software: you can redistribute it and/or
>>>>        modify #
>>>>        +# it under the terms of the GNU General Public License as published
>>>>        by #
>>>>        +# the Free Software Foundation, either version 3 of the
>>>>        License, or #
>>>>        +# (at your option) any later version. #
>>>>        +# #
>>>>        +# This program is distributed in the hope that it will be useful, #
>>>>        +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>>        +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>>        +# GNU General Public License for more details. #
>>>>        +# #
>>>>        +# You should have received a copy of the GNU General Public
>>>>        License #
>>>>        +# along with this program. If not, see
>>>>        <http://www.gnu.org/licenses/> <http://www.gnu.org/licenses/>>
>>>>        <http://www.gnu.org/licenses/>> <http://www.gnu.org/licenses/>>>. #
>>>>        +# #
>>>>        +###############################################################################
>>>>        +
>>>>        +###############################################################################
>>>>        +# Definitions
>>>>        +###############################################################################
>>>>        +
>>>>        +include Config
>>>>        +
>>>>        +VER = 0.7.1
>>>>        +SUMMARY = A Web Service Discovery host daemon.
>>>>        +
>>>>        +THISAPP = wsdd-$(VER)
>>>>        +DL_FILE = $(THISAPP).tar.gz
>>>>        +DL_FROM = $(URL_IPFIRE)
>>>>        +DIR_APP = $(DIR_SRC)/$(THISAPP)
>>>>        +TARGET = $(DIR_INFO)/$(THISAPP)
>>>>        +PROG = wsdd
>>>>        +PAK_VER = 1
>>>>        +
>>>>        +DEPS =
>>>>        +
>>>>        +SERVICES = wsdd
>>>>        +
>>>>        +###############################################################################
>>>>        +# Top-level Rules
>>>>        +###############################################################################
>>>>        +
>>>>        +objects = $(DL_FILE)
>>>>        +
>>>>        +$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>>>        +
>>>>        +$(DL_FILE)_BLAKE2 =
>>>>        ce43022c3bd9f7ff1fd7169ac0d5ab6b2ff78d35c221c05b2e20908a5772d563ab2aca571d4e6ae48a55d19d4adcb9cde60f720ae47af8ee950198224fcfdb26
>>>>        +
>>>>        +install : $(TARGET)
>>>>        +
>>>>        +check : $(patsubst %,$(DIR_CHK)/%,$(objects))
>>>>        +
>>>>        +download :$(patsubst %,$(DIR_DL)/%,$(objects))
>>>>        +
>>>>        +b2 : $(subst %,%_BLAKE2,$(objects))
>>>>        +
>>>>        +dist:
>>>>        + @$(PAK)
>>>>        +
>>>>        +###############################################################################
>>>>        +# Downloading, checking, b2sum
>>>>        +###############################################################################
>>>>        +
>>>>        +$(patsubst %,$(DIR_CHK)/%,$(objects)) :
>>>>        + @$(CHECK)
>>>>        +
>>>>        +$(patsubst %,$(DIR_DL)/%,$(objects)) :
>>>>        + @$(LOAD)
>>>>        +
>>>>        +$(subst %,%_BLAKE2,$(objects)) :
>>>>        + @$(B2SUM)
>>>>        +
>>>>        +###############################################################################
>>>>        +# Installation Details
>>>>        +###############################################################################
>>>>        +
>>>>        +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>>>        + @$(PREBUILD)
>>>>        + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf
>>>>        $(DIR_DL)/$(DL_FILE)
>>>>        + cd $(DIR_APP) && cp src/wsdd.py /usr/bin/wsdd
>>>>        +
>>>>        + #install initscripts
>>>>        + $(call INSTALL_INITSCRIPTS,$(SERVICES))
>>>>        +
>>>>        + @rm -rf $(DIR_APP)
>>>>        + @$(POSTBUILD)
>>>>        diff --git a/make.sh b/make.sh
>>>>        index 06e09c9a3..5af3dedc3 100755
>>>>        --- a/make.sh
>>>>        +++ b/make.sh
>>>>        @@ -1699,6 +1699,7 @@ buildipfire() {
>>>>        lfsmake2 perl-MIME-Base32
>>>>        lfsmake2 perl-URI-Encode
>>>>        lfsmake2 rsnapshot
>>>>        + lfsmake2 wsdd
>>>>        # Kernelbuild ... current we have no platform that need
>>>>        # multi kernel builds so KCFG is empty
>>>>        diff --git a/src/initscripts/packages/wsdd
>>>>        b/src/initscripts/packages/wsdd
>>>>        new file mode 100644
>>>>        index 000000000..c5207f872
>>>>        --- /dev/null
>>>>        +++ b/src/initscripts/packages/wsdd
>>>>        @@ -0,0 +1,63 @@
>>>>        +#!/bin/sh
>>>>        +###############################################################################
>>>>        +# #
>>>>        +# IPFire.org - A linux based firewall #
>>>>        +# Copyright (C) 2007-2024 IPFire Team <info@ipfire.org
>>>>        <mailto:info@ipfire.org>> #
>>>>        +# #
>>>>        +# This program is free software: you can redistribute it and/or
>>>>        modify #
>>>>        +# it under the terms of the GNU General Public License as published
>>>>        by #
>>>>        +# the Free Software Foundation, either version 3 of the
>>>>        License, or #
>>>>        +# (at your option) any later version. #
>>>>        +# #
>>>>        +# This program is distributed in the hope that it will be useful, #
>>>>        +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>>        +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>>        +# GNU General Public License for more details. #
>>>>        +# #
>>>>        +# You should have received a copy of the GNU General Public
>>>>        License #
>>>>        +# along with this program. If not, see
>>>>        <http://www.gnu.org/licenses/> <http://www.gnu.org/licenses/>>
>>>>        <http://www.gnu.org/licenses/>> <http://www.gnu.org/licenses/>>>. #
>>>>        +# #
>>>>        +###############################################################################
>>>>        +
>>>>        +. /etc/sysconfig/rc
>>>>        +. $rc_functions
>>>>        +
>>>>        +eval $(/usr/local/bin/readhash /var/ipfire/ethernet/settings)
>>>>        +
>>>>        +# Create chroot directory for wsdd
>>>>        +mkdir -p /var/run/wsdd
>>>>        +
>>>>        +INTERFACES="-i ${GREEN_DEV}"
>>>>        + if [ -n "${BLUE_DEV}" ]; then
>>>>        + INTERFACES="${INTERFACES} -i ${BLUE_DEV}"
>>>>        + fi
>>>>        +WSDD_WORKGROUP="-w $(/usr/bin/testparm -s --parameter-name
>>>>        workgroup 2>/dev/null)"
>>>>        +WSDD_USER="-u wsdd:wsdd"
>>>>        +WSDD_CHROOT="-c /var/run/wsdd"
>>>>        +
>>>>        +case "$1" in
>>>>        + start)
>>>>        + boot_mesg "Starting wsdd daemon..."
>>>>        + loadproc -b /usr/bin/wsdd -4 ${WSDD_USER} ${INTERFACES}
>>>>        ${WSDD_WORKGROUP} ${WSDD_CHROOT}
>>>>        + sleep 1
>>>>        + echo $(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk '{print
>>>>        $2}') > /var/run/wsdd/pid
>>>>        + ;;
>>>>        + stop)
>>>>        + boot_mesg "Stopping wsdd daemon..."
>>>>        + killproc -p /var/run/wsdd/pid /usr/bin/wsdd
>>>>        + ;;
>>>>        + status)
>>>>        + WSDD_PID=$(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk
>>>>        '{print $2}')
>>>>        + if [ -n "${WSDD_PID}" ]; then
>>>>        + echo -e "\\033[1;36m /usr/bin/wsdd is running with Process"\
>>>>        + "ID(s) $WSDD_PID.\\033[0;39m"
>>>>        + else
>>>>        + echo -e "\\033[1;36m /usr/bin/wsdd is not running.\\033[0;39m"
>>>>        + fi
>>>>        + ;;
>>>>        + *)
>>>>        + echo "Usage: $0 (start|stop|status)"
>>>>        + exit 1
>>>>        + ;;
>>>>        +esac
>>>>        +
>>>>        diff --git a/src/paks/wsdd/install.sh b/src/paks/wsdd/install.sh
>>>>        new file mode 100644
>>>>        index 000000000..181b84eb9
>>>>        --- /dev/null
>>>>        +++ b/src/paks/wsdd/install.sh
>>>>        @@ -0,0 +1,40 @@
>>>>        +#!/bin/bash
>>>>        +############################################################################
>>>>        +# #
>>>>        +# This file is part of the IPFire Firewall. #
>>>>        +# #
>>>>        +# IPFire is free software; you can redistribute it and/or modify #
>>>>        +# it under the terms of the GNU General Public License as published
>>>>        by #
>>>>        +# the Free Software Foundation; either version 2 of the
>>>>        License, or #
>>>>        +# (at your option) any later version. #
>>>>        +# #
>>>>        +# IPFire is distributed in the hope that it will be useful, #
>>>>        +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>>        +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>>        +# GNU General Public License for more details. #
>>>>        +# #
>>>>        +# You should have received a copy of the GNU General Public
>>>>        License #
>>>>        +# along with IPFire; if not, write to the Free Software #
>>>>        +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>>>        02111-1307 USA #
>>>>        +# #
>>>>        +# Copyright (C) 2007 IPFire-Team <info@ipfire.org
>>>>        <mailto:info@ipfire.org>>. #
>>>>        +# #
>>>>        +############################################################################
>>>>        +#
>>>>        +. /opt/pakfire/lib/functions.sh
>>>>        +
>>>>        +# If the wsdd user does not exist yet, then create it and add to
>>>>        wsdd group.
>>>>        +if ! getent user wsdd >/dev/null; then
>>>>        + useradd -r -U -d / -s /bin/false -c "wsdd user" wsdd
>>>>        + usermod -a -G wsdd wsdd
>>>>        +fi
>>>>        +
>>>>        +extract_files
>>>>        +restore_backup ${NAME}
>>>>        +
>>>>        +# Create startlinks
>>>>        +ln -sf ../init.d/wsdd /etc/rc.d/rc0.d/K35wsdd
>>>>        +ln -sf ../init.d/wsdd /etc/rc.d/rc3.d/S65wsdd
>>>>        +ln -sf ../init.d/wsdd /etc/rc.d/rc6.d/K35wsdd
>>>>        +start_service ${NAME}
>>>>        +exit 0
>>>>        diff --git a/src/paks/wsdd/uninstall.sh b/src/paks/wsdd/uninstall.sh
>>>>        new file mode 100644
>>>>        index 000000000..4c52ee281
>>>>        --- /dev/null
>>>>        +++ b/src/paks/wsdd/uninstall.sh
>>>>        @@ -0,0 +1,30 @@
>>>>        +#!/bin/bash
>>>>        +############################################################################
>>>>        +# #
>>>>        +# This file is part of the IPFire Firewall. #
>>>>        +# #
>>>>        +# IPFire is free software; you can redistribute it and/or modify #
>>>>        +# it under the terms of the GNU General Public License as published
>>>>        by #
>>>>        +# the Free Software Foundation; either version 2 of the
>>>>        License, or #
>>>>        +# (at your option) any later version. #
>>>>        +# #
>>>>        +# IPFire is distributed in the hope that it will be useful, #
>>>>        +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>>        +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>>        +# GNU General Public License for more details. #
>>>>        +# #
>>>>        +# You should have received a copy of the GNU General Public
>>>>        License #
>>>>        +# along with IPFire; if not, write to the Free Software #
>>>>        +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>>>        02111-1307 USA #
>>>>        +# #
>>>>        +# Copyright (C) 2007 IPFire-Team <info@ipfire.org
>>>>        <mailto:info@ipfire.org>>. #
>>>>        +# #
>>>>        +############################################################################
>>>>        +#
>>>>        +. /opt/pakfire/lib/functions.sh
>>>>        +stop_service ${NAME}
>>>>        +make_backup ${NAME}
>>>>        +remove_files
>>>>        +# Remove all start links.
>>>>        +rm -rf /etc/rc.d/rc*.d/*wsdd
>>>>        +exit 0
>>>>        diff --git a/src/paks/wsdd/update.sh b/src/paks/wsdd/update.sh
>>>>        new file mode 100644
>>>>        index 000000000..99776659c
>>>>        --- /dev/null
>>>>        +++ b/src/paks/wsdd/update.sh
>>>>        @@ -0,0 +1,27 @@
>>>>        +#!/bin/bash
>>>>        +############################################################################
>>>>        +# #
>>>>        +# This file is part of the IPFire Firewall. #
>>>>        +# #
>>>>        +# IPFire is free software; you can redistribute it and/or modify #
>>>>        +# it under the terms of the GNU General Public License as published
>>>>        by #
>>>>        +# the Free Software Foundation; either version 2 of the
>>>>        License, or #
>>>>        +# (at your option) any later version. #
>>>>        +# #
>>>>        +# IPFire is distributed in the hope that it will be useful, #
>>>>        +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>>        +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>>        +# GNU General Public License for more details. #
>>>>        +# #
>>>>        +# You should have received a copy of the GNU General Public
>>>>        License #
>>>>        +# along with IPFire; if not, write to the Free Software #
>>>>        +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>>>        02111-1307 USA #
>>>>        +# #
>>>>        +# Copyright (C) 2007-2020 IPFire-Team <info@ipfire.org
>>>>        <mailto:info@ipfire.org>>. #
>>>>        +# #
>>>>        +############################################################################
>>>>        +#
>>>>        +. /opt/pakfire/lib/functions.sh
>>>>        +extract_backup_includes
>>>>        +./uninstall.sh
>>>>        +./install.sh
>>>>        -- 2.43.0
>>>>            -- >> Sent from my laptop
>>>>    -- Sent from my laptop
>>> 
>>> -- 
>>> Sent from my laptop