mbox

[v2] git: update to 2.12.1

Message ID 20170414072252.4683-1-marcel.lorenz@ipfire.org
State Dropped
Headers

Message

Marcel Lorenz April 14, 2017, 5:22 p.m. UTC 
  Signed-off-by: Marcel Lorenz <marcel.lorenz@ipfire.org>
---
 config/rootfiles/packages/git | 29 ++++++++++++++++-------------
 lfs/git                       | 11 ++++++-----
 2 files changed, 22 insertions(+), 18 deletions(-)

Comments

Michael Tremer April 18, 2017, 10:17 p.m. UTC | #1 
Hi,

the tarball from here

  https://www.kernel.org/pub/software/scm/git/git-2.12.1.tar.gz

does not match with the checksum in the LFS file. Where did you download yours
from?

-Michael

On Fri, 2017-04-14 at 09:22 +0200, Marcel Lorenz wrote:
> Signed-off-by: Marcel Lorenz <marcel.lorenz@ipfire.org>
> ---
>  config/rootfiles/packages/git | 29 ++++++++++++++++-------------
>  lfs/git                       | 11 ++++++-----
>  2 files changed, 22 insertions(+), 18 deletions(-)
> 
> diff --git a/config/rootfiles/packages/git b/config/rootfiles/packages/git
> index ea31b20..bf9e372 100644
> --- a/config/rootfiles/packages/git
> +++ b/config/rootfiles/packages/git
> @@ -10,18 +10,18 @@ usr/lib/perl5/site_perl/5.12.3/Error.pm
>  usr/lib/perl5/site_perl/5.12.3/Git.pm
>  usr/lib/perl5/site_perl/5.12.3/Git/I18N.pm
>  usr/lib/perl5/site_perl/5.12.3/Git/IndexInfo.pm
> -#usr/lib/perl5/site_perl/5.12.3/Git/SVN
> -usr/lib/perl5/site_perl/5.12.3/Git/SVN.pm
> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Editor.pm
> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Fetcher.pm
> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/GlobSpec.pm
> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Log.pm
> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize
> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize/YAML.pm
> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Migration.pm
> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Prompt.pm
> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Ra.pm
> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Utils.pm
> +usr/lib/perl5/site_perl/5.12.3/Git/SVN
> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN.pm
> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Editor.pm
> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Fetcher.pm
> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/GlobSpec.pm
> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Log.pm
> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize
> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize/YAML.pm
> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Migration.pm
> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Prompt.pm
> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Ra.pm
> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Utils.pm
>  #usr/lib/perl5/site_perl/5.12.3/MACHINE-linux-thread-multi/auto/Git
>  #usr/lib/perl5/site_perl/5.12.3/MACHINE-linux-thread-multi/auto/Git/.packlist
>  #usr/libexec/git-core
> @@ -138,7 +138,6 @@ usr/libexec/git-core/git-rebase--interactive
>  usr/libexec/git-core/git-rebase--merge
>  usr/libexec/git-core/git-receive-pack
>  usr/libexec/git-core/git-reflog
> -usr/libexec/git-core/git-relink
>  usr/libexec/git-core/git-remote
>  usr/libexec/git-core/git-remote-ext
>  usr/libexec/git-core/git-remote-fd
> @@ -201,6 +200,7 @@ usr/libexec/git-core/mergetools/diffmerge
>  usr/libexec/git-core/mergetools/diffuse
>  usr/libexec/git-core/mergetools/ecmerge
>  usr/libexec/git-core/mergetools/emerge
> +usr/libexec/git-core/mergetools/examdiff
>  usr/libexec/git-core/mergetools/gvimdiff
>  usr/libexec/git-core/mergetools/gvimdiff2
>  usr/libexec/git-core/mergetools/gvimdiff3
> @@ -228,6 +228,7 @@ usr/share/git-core/templates/hooks/pre-applypatch.sample
>  usr/share/git-core/templates/hooks/pre-commit.sample
>  usr/share/git-core/templates/hooks/pre-push.sample
>  usr/share/git-core/templates/hooks/pre-rebase.sample
> +usr/share/git-core/templates/hooks/pre-receive.sample
>  usr/share/git-core/templates/hooks/prepare-commit-msg.sample
>  usr/share/git-core/templates/hooks/update.sample
>  #usr/share/git-core/templates/info
> @@ -270,6 +271,7 @@ usr/share/git-core/templates/info/exclude
>  #usr/share/git-gui/lib/msgs/ja.msg
>  #usr/share/git-gui/lib/msgs/nb.msg
>  #usr/share/git-gui/lib/msgs/pt_br.msg
> +#usr/share/git-gui/lib/msgs/pt_pt.msg
>  #usr/share/git-gui/lib/msgs/ru.msg
>  #usr/share/git-gui/lib/msgs/sv.msg
>  #usr/share/git-gui/lib/msgs/vi.msg
> @@ -302,6 +304,7 @@ usr/share/git-core/templates/info/exclude
>  #usr/share/gitk/lib/msgs/it.msg
>  #usr/share/gitk/lib/msgs/ja.msg
>  #usr/share/gitk/lib/msgs/pt_br.msg
> +#usr/share/gitk/lib/msgs/pt_pt.msg
>  #usr/share/gitk/lib/msgs/ru.msg
>  #usr/share/gitk/lib/msgs/sv.msg
>  #usr/share/gitk/lib/msgs/vi.msg
> diff --git a/lfs/git b/lfs/git
> index 564bc09..9b55b20 100644
> --- a/lfs/git
> +++ b/lfs/git
> @@ -1,7 +1,7 @@
>  #############################################################################
> ##
>  #                                                                            
>  #
>  # IPFire.org - A linux based
> firewall                                         #
> -# Copyright (C) 2013  IPFire Team  <info@ipfire.org>                         
>  #
> +# Copyright (C) 2017  IPFire Team  <info@ipfire.org>                         
>  #
>  #                                                                            
>  #
>  # This program is free software: you can redistribute it and/or
> modify        #
>  # it under the terms of the GNU General Public License as published
> by        #
> @@ -24,15 +24,15 @@
>  
>  include Config
>  
> -VER        = 2.7.4
> +VER        = 2.12.1
>  
>  THISAPP    = git-$(VER)
> -DL_FILE    = $(THISAPP).tar.xz
> +DL_FILE    = $(THISAPP).tar.gz
>  DL_FROM    = $(URL_IPFIRE)
>  DIR_APP    = $(DIR_SRC)/$(THISAPP)
>  TARGET     = $(DIR_INFO)/$(THISAPP)
>  PROG       = git
> -PAK_VER    = 13
> +PAK_VER    = 14
>  
>  DEPS       = "perl-Authen-SASL perl-MIME-Base64 perl-Net-SMTP-SSL"
>  
> @@ -44,7 +44,7 @@ objects = $(DL_FILE)
>  
>  $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>  
> -$(DL_FILE)_MD5 = b0219fcb6d73104361f4fbdba3741d00
> +$(DL_FILE)_MD5 = a05c614c80ecd41e50699f1562e1130c
>  
>  install : $(TARGET)
>  
> @@ -77,6 +77,7 @@ $(subst %,%_MD5,$(objects)) :
>  $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>  	@$(PREBUILD)
>  	@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
> +	cd $(DIR_APP) && autoconf
>  	cd $(DIR_APP) && ./configure \
>  		--with-gitconfig=/etc/gitconfig \
>  		--prefix=/usr \
Marcel Lorenz April 18, 2017, 10:27 p.m. UTC | #2 
Hi,

i have the file from here:

https://github.com/git/git/releases

Best,
Marcel

Am 2017-04-18 14:17, schrieb Michael Tremer:
> Hi,
> 
> the tarball from here
> 
>   https://www.kernel.org/pub/software/scm/git/git-2.12.1.tar.gz
> 
> does not match with the checksum in the LFS file. Where did you 
> download yours
> from?
> 
> -Michael
> 
> On Fri, 2017-04-14 at 09:22 +0200, Marcel Lorenz wrote:
>> Signed-off-by: Marcel Lorenz <marcel.lorenz@ipfire.org>
>> ---
>>  config/rootfiles/packages/git | 29 ++++++++++++++++-------------
>>  lfs/git                       | 11 ++++++-----
>>  2 files changed, 22 insertions(+), 18 deletions(-)
>> 
>> diff --git a/config/rootfiles/packages/git 
>> b/config/rootfiles/packages/git
>> index ea31b20..bf9e372 100644
>> --- a/config/rootfiles/packages/git
>> +++ b/config/rootfiles/packages/git
>> @@ -10,18 +10,18 @@ usr/lib/perl5/site_perl/5.12.3/Error.pm
>>  usr/lib/perl5/site_perl/5.12.3/Git.pm
>>  usr/lib/perl5/site_perl/5.12.3/Git/I18N.pm
>>  usr/lib/perl5/site_perl/5.12.3/Git/IndexInfo.pm
>> -#usr/lib/perl5/site_perl/5.12.3/Git/SVN
>> -usr/lib/perl5/site_perl/5.12.3/Git/SVN.pm
>> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Editor.pm
>> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Fetcher.pm
>> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/GlobSpec.pm
>> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Log.pm
>> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize
>> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize/YAML.pm
>> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Migration.pm
>> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Prompt.pm
>> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Ra.pm
>> -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Utils.pm
>> +usr/lib/perl5/site_perl/5.12.3/Git/SVN
>> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN.pm
>> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Editor.pm
>> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Fetcher.pm
>> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/GlobSpec.pm
>> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Log.pm
>> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize
>> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize/YAML.pm
>> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Migration.pm
>> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Prompt.pm
>> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Ra.pm
>> +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Utils.pm
>>  #usr/lib/perl5/site_perl/5.12.3/MACHINE-linux-thread-multi/auto/Git
>>  #usr/lib/perl5/site_perl/5.12.3/MACHINE-linux-thread-multi/auto/Git/.packlist
>>  #usr/libexec/git-core
>> @@ -138,7 +138,6 @@ usr/libexec/git-core/git-rebase--interactive
>>  usr/libexec/git-core/git-rebase--merge
>>  usr/libexec/git-core/git-receive-pack
>>  usr/libexec/git-core/git-reflog
>> -usr/libexec/git-core/git-relink
>>  usr/libexec/git-core/git-remote
>>  usr/libexec/git-core/git-remote-ext
>>  usr/libexec/git-core/git-remote-fd
>> @@ -201,6 +200,7 @@ usr/libexec/git-core/mergetools/diffmerge
>>  usr/libexec/git-core/mergetools/diffuse
>>  usr/libexec/git-core/mergetools/ecmerge
>>  usr/libexec/git-core/mergetools/emerge
>> +usr/libexec/git-core/mergetools/examdiff
>>  usr/libexec/git-core/mergetools/gvimdiff
>>  usr/libexec/git-core/mergetools/gvimdiff2
>>  usr/libexec/git-core/mergetools/gvimdiff3
>> @@ -228,6 +228,7 @@ 
>> usr/share/git-core/templates/hooks/pre-applypatch.sample
>>  usr/share/git-core/templates/hooks/pre-commit.sample
>>  usr/share/git-core/templates/hooks/pre-push.sample
>>  usr/share/git-core/templates/hooks/pre-rebase.sample
>> +usr/share/git-core/templates/hooks/pre-receive.sample
>>  usr/share/git-core/templates/hooks/prepare-commit-msg.sample
>>  usr/share/git-core/templates/hooks/update.sample
>>  #usr/share/git-core/templates/info
>> @@ -270,6 +271,7 @@ usr/share/git-core/templates/info/exclude
>>  #usr/share/git-gui/lib/msgs/ja.msg
>>  #usr/share/git-gui/lib/msgs/nb.msg
>>  #usr/share/git-gui/lib/msgs/pt_br.msg
>> +#usr/share/git-gui/lib/msgs/pt_pt.msg
>>  #usr/share/git-gui/lib/msgs/ru.msg
>>  #usr/share/git-gui/lib/msgs/sv.msg
>>  #usr/share/git-gui/lib/msgs/vi.msg
>> @@ -302,6 +304,7 @@ usr/share/git-core/templates/info/exclude
>>  #usr/share/gitk/lib/msgs/it.msg
>>  #usr/share/gitk/lib/msgs/ja.msg
>>  #usr/share/gitk/lib/msgs/pt_br.msg
>> +#usr/share/gitk/lib/msgs/pt_pt.msg
>>  #usr/share/gitk/lib/msgs/ru.msg
>>  #usr/share/gitk/lib/msgs/sv.msg
>>  #usr/share/gitk/lib/msgs/vi.msg
>> diff --git a/lfs/git b/lfs/git
>> index 564bc09..9b55b20 100644
>> --- a/lfs/git
>> +++ b/lfs/git
>> @@ -1,7 +1,7 @@
>>  #############################################################################
>> ##
>>  #                                                                            
>>  #
>>  # IPFire.org - A linux based
>> firewall                                         #
>> -# Copyright (C) 2013  IPFire 
>> Team  <info@ipfire.org>                         
>>  #
>> +# Copyright (C) 2017  IPFire 
>> Team  <info@ipfire.org>                         
>>  #
>>  #                                                                            
>>  #
>>  # This program is free software: you can redistribute it and/or
>> modify        #
>>  # it under the terms of the GNU General Public License as published
>> by        #
>> @@ -24,15 +24,15 @@
>>  
>>  include Config
>>  
>> -VER        = 2.7.4
>> +VER        = 2.12.1
>>  
>>  THISAPP    = git-$(VER)
>> -DL_FILE    = $(THISAPP).tar.xz
>> +DL_FILE    = $(THISAPP).tar.gz
>>  DL_FROM    = $(URL_IPFIRE)
>>  DIR_APP    = $(DIR_SRC)/$(THISAPP)
>>  TARGET     = $(DIR_INFO)/$(THISAPP)
>>  PROG       = git
>> -PAK_VER    = 13
>> +PAK_VER    = 14
>>  
>>  DEPS       = "perl-Authen-SASL perl-MIME-Base64 perl-Net-SMTP-SSL"
>>  
>> @@ -44,7 +44,7 @@ objects = $(DL_FILE)
>>  
>>  $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>  
>> -$(DL_FILE)_MD5 = b0219fcb6d73104361f4fbdba3741d00
>> +$(DL_FILE)_MD5 = a05c614c80ecd41e50699f1562e1130c
>>  
>>  install : $(TARGET)
>>  
>> @@ -77,6 +77,7 @@ $(subst %,%_MD5,$(objects)) :
>>  $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>  	@$(PREBUILD)
>>  	@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
>> +	cd $(DIR_APP) && autoconf
>>  	cd $(DIR_APP) && ./configure \
>>  		--with-gitconfig=/etc/gitconfig \
>>  		--prefix=/usr \
Michael Tremer April 18, 2017, 10:33 p.m. UTC | #3 
Could you change it to the official release tarball which also has a configure
script?

On Tue, 2017-04-18 at 14:27 +0200, Marcel Lorenz wrote:
> Hi,
> 
> i have the file from here:
> 
> https://github.com/git/git/releases
> 
> Best,
> Marcel
> 
> Am 2017-04-18 14:17, schrieb Michael Tremer:
> > Hi,
> > 
> > the tarball from here
> > 
> >   https://www.kernel.org/pub/software/scm/git/git-2.12.1.tar.gz
> > 
> > does not match with the checksum in the LFS file. Where did you 
> > download yours
> > from?
> > 
> > -Michael
> > 
> > On Fri, 2017-04-14 at 09:22 +0200, Marcel Lorenz wrote:
> > > Signed-off-by: Marcel Lorenz <marcel.lorenz@ipfire.org>
> > > ---
> > >  config/rootfiles/packages/git | 29 ++++++++++++++++-------------
> > >  lfs/git                       | 11 ++++++-----
> > >  2 files changed, 22 insertions(+), 18 deletions(-)
> > > 
> > > diff --git a/config/rootfiles/packages/git 
> > > b/config/rootfiles/packages/git
> > > index ea31b20..bf9e372 100644
> > > --- a/config/rootfiles/packages/git
> > > +++ b/config/rootfiles/packages/git
> > > @@ -10,18 +10,18 @@ usr/lib/perl5/site_perl/5.12.3/Error.pm
> > >  usr/lib/perl5/site_perl/5.12.3/Git.pm
> > >  usr/lib/perl5/site_perl/5.12.3/Git/I18N.pm
> > >  usr/lib/perl5/site_perl/5.12.3/Git/IndexInfo.pm
> > > -#usr/lib/perl5/site_perl/5.12.3/Git/SVN
> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN.pm
> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Editor.pm
> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Fetcher.pm
> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/GlobSpec.pm
> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Log.pm
> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize
> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize/YAML.pm
> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Migration.pm
> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Prompt.pm
> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Ra.pm
> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Utils.pm
> > > +usr/lib/perl5/site_perl/5.12.3/Git/SVN
> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN.pm
> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Editor.pm
> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Fetcher.pm
> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/GlobSpec.pm
> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Log.pm
> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize
> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize/YAML.pm
> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Migration.pm
> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Prompt.pm
> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Ra.pm
> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Utils.pm
> > >  #usr/lib/perl5/site_perl/5.12.3/MACHINE-linux-thread-multi/auto/Git
> > >  #usr/lib/perl5/site_perl/5.12.3/MACHINE-linux-thread-
> > > multi/auto/Git/.packlist
> > >  #usr/libexec/git-core
> > > @@ -138,7 +138,6 @@ usr/libexec/git-core/git-rebase--interactive
> > >  usr/libexec/git-core/git-rebase--merge
> > >  usr/libexec/git-core/git-receive-pack
> > >  usr/libexec/git-core/git-reflog
> > > -usr/libexec/git-core/git-relink
> > >  usr/libexec/git-core/git-remote
> > >  usr/libexec/git-core/git-remote-ext
> > >  usr/libexec/git-core/git-remote-fd
> > > @@ -201,6 +200,7 @@ usr/libexec/git-core/mergetools/diffmerge
> > >  usr/libexec/git-core/mergetools/diffuse
> > >  usr/libexec/git-core/mergetools/ecmerge
> > >  usr/libexec/git-core/mergetools/emerge
> > > +usr/libexec/git-core/mergetools/examdiff
> > >  usr/libexec/git-core/mergetools/gvimdiff
> > >  usr/libexec/git-core/mergetools/gvimdiff2
> > >  usr/libexec/git-core/mergetools/gvimdiff3
> > > @@ -228,6 +228,7 @@ 
> > > usr/share/git-core/templates/hooks/pre-applypatch.sample
> > >  usr/share/git-core/templates/hooks/pre-commit.sample
> > >  usr/share/git-core/templates/hooks/pre-push.sample
> > >  usr/share/git-core/templates/hooks/pre-rebase.sample
> > > +usr/share/git-core/templates/hooks/pre-receive.sample
> > >  usr/share/git-core/templates/hooks/prepare-commit-msg.sample
> > >  usr/share/git-core/templates/hooks/update.sample
> > >  #usr/share/git-core/templates/info
> > > @@ -270,6 +271,7 @@ usr/share/git-core/templates/info/exclude
> > >  #usr/share/git-gui/lib/msgs/ja.msg
> > >  #usr/share/git-gui/lib/msgs/nb.msg
> > >  #usr/share/git-gui/lib/msgs/pt_br.msg
> > > +#usr/share/git-gui/lib/msgs/pt_pt.msg
> > >  #usr/share/git-gui/lib/msgs/ru.msg
> > >  #usr/share/git-gui/lib/msgs/sv.msg
> > >  #usr/share/git-gui/lib/msgs/vi.msg
> > > @@ -302,6 +304,7 @@ usr/share/git-core/templates/info/exclude
> > >  #usr/share/gitk/lib/msgs/it.msg
> > >  #usr/share/gitk/lib/msgs/ja.msg
> > >  #usr/share/gitk/lib/msgs/pt_br.msg
> > > +#usr/share/gitk/lib/msgs/pt_pt.msg
> > >  #usr/share/gitk/lib/msgs/ru.msg
> > >  #usr/share/gitk/lib/msgs/sv.msg
> > >  #usr/share/gitk/lib/msgs/vi.msg
> > > diff --git a/lfs/git b/lfs/git
> > > index 564bc09..9b55b20 100644
> > > --- a/lfs/git
> > > +++ b/lfs/git
> > > @@ -1,7 +1,7 @@
> > >  #########################################################################
> > > ####
> > > ##
> > >  #                                                                        
> > >     
> > >  #
> > >  # IPFire.org - A linux based
> > > firewall                                         #
> > > -# Copyright (C) 2013  IPFire 
> > > Team  <info@ipfire.org>                         
> > >  #
> > > +# Copyright (C) 2017  IPFire 
> > > Team  <info@ipfire.org>                         
> > >  #
> > >  #                                                                        
> > >     
> > >  #
> > >  # This program is free software: you can redistribute it and/or
> > > modify        #
> > >  # it under the terms of the GNU General Public License as published
> > > by        #
> > > @@ -24,15 +24,15 @@
> > >  
> > >  include Config
> > >  
> > > -VER        = 2.7.4
> > > +VER        = 2.12.1
> > >  
> > >  THISAPP    = git-$(VER)
> > > -DL_FILE    = $(THISAPP).tar.xz
> > > +DL_FILE    = $(THISAPP).tar.gz
> > >  DL_FROM    = $(URL_IPFIRE)
> > >  DIR_APP    = $(DIR_SRC)/$(THISAPP)
> > >  TARGET     = $(DIR_INFO)/$(THISAPP)
> > >  PROG       = git
> > > -PAK_VER    = 13
> > > +PAK_VER    = 14
> > >  
> > >  DEPS       = "perl-Authen-SASL perl-MIME-Base64 perl-Net-SMTP-SSL"
> > >  
> > > @@ -44,7 +44,7 @@ objects = $(DL_FILE)
> > >  
> > >  $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
> > >  
> > > -$(DL_FILE)_MD5 = b0219fcb6d73104361f4fbdba3741d00
> > > +$(DL_FILE)_MD5 = a05c614c80ecd41e50699f1562e1130c
> > >  
> > >  install : $(TARGET)
> > >  
> > > @@ -77,6 +77,7 @@ $(subst %,%_MD5,$(objects)) :
> > >  $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
> > >  	@$(PREBUILD)
> > >  	@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf
> > > $(DIR_DL)/$(DL_FILE)
> > > +	cd $(DIR_APP) && autoconf
> > >  	cd $(DIR_APP) && ./configure \
> > >  		--with-gitconfig=/etc/gitconfig \
> > >  		--prefix=/usr \
> 
>
Marcel Lorenz April 18, 2017, 10:43 p.m. UTC | #4 
Hi,

ok, i change it...

-Marcel

Am 2017-04-18 14:33, schrieb Michael Tremer:
> Could you change it to the official release tarball which also has a 
> configure
> script?
> 
> On Tue, 2017-04-18 at 14:27 +0200, Marcel Lorenz wrote:
>> Hi,
>> 
>> i have the file from here:
>> 
>> https://github.com/git/git/releases
>> 
>> Best,
>> Marcel
>> 
>> Am 2017-04-18 14:17, schrieb Michael Tremer:
>> > Hi,
>> >
>> > the tarball from here
>> >
>> >   https://www.kernel.org/pub/software/scm/git/git-2.12.1.tar.gz
>> >
>> > does not match with the checksum in the LFS file. Where did you 
>> > download yours
>> > from?
>> >
>> > -Michael
>> >
>> > On Fri, 2017-04-14 at 09:22 +0200, Marcel Lorenz wrote:
>> > > Signed-off-by: Marcel Lorenz <marcel.lorenz@ipfire.org>
>> > > ---
>> > >  config/rootfiles/packages/git | 29 ++++++++++++++++-------------
>> > >  lfs/git                       | 11 ++++++-----
>> > >  2 files changed, 22 insertions(+), 18 deletions(-)
>> > >
>> > > diff --git a/config/rootfiles/packages/git 
>> > > b/config/rootfiles/packages/git
>> > > index ea31b20..bf9e372 100644
>> > > --- a/config/rootfiles/packages/git
>> > > +++ b/config/rootfiles/packages/git
>> > > @@ -10,18 +10,18 @@ usr/lib/perl5/site_perl/5.12.3/Error.pm
>> > >  usr/lib/perl5/site_perl/5.12.3/Git.pm
>> > >  usr/lib/perl5/site_perl/5.12.3/Git/I18N.pm
>> > >  usr/lib/perl5/site_perl/5.12.3/Git/IndexInfo.pm
>> > > -#usr/lib/perl5/site_perl/5.12.3/Git/SVN
>> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN.pm
>> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Editor.pm
>> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Fetcher.pm
>> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/GlobSpec.pm
>> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Log.pm
>> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize
>> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize/YAML.pm
>> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Migration.pm
>> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Prompt.pm
>> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Ra.pm
>> > > -usr/lib/perl5/site_perl/5.12.3/Git/SVN/Utils.pm
>> > > +usr/lib/perl5/site_perl/5.12.3/Git/SVN
>> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN.pm
>> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Editor.pm
>> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Fetcher.pm
>> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/GlobSpec.pm
>> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Log.pm
>> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize
>> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Memoize/YAML.pm
>> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Migration.pm
>> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Prompt.pm
>> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Ra.pm
>> > > +#usr/lib/perl5/site_perl/5.12.3/Git/SVN/Utils.pm
>> > >  #usr/lib/perl5/site_perl/5.12.3/MACHINE-linux-thread-multi/auto/Git
>> > >  #usr/lib/perl5/site_perl/5.12.3/MACHINE-linux-thread-
>> > > multi/auto/Git/.packlist
>> > >  #usr/libexec/git-core
>> > > @@ -138,7 +138,6 @@ usr/libexec/git-core/git-rebase--interactive
>> > >  usr/libexec/git-core/git-rebase--merge
>> > >  usr/libexec/git-core/git-receive-pack
>> > >  usr/libexec/git-core/git-reflog
>> > > -usr/libexec/git-core/git-relink
>> > >  usr/libexec/git-core/git-remote
>> > >  usr/libexec/git-core/git-remote-ext
>> > >  usr/libexec/git-core/git-remote-fd
>> > > @@ -201,6 +200,7 @@ usr/libexec/git-core/mergetools/diffmerge
>> > >  usr/libexec/git-core/mergetools/diffuse
>> > >  usr/libexec/git-core/mergetools/ecmerge
>> > >  usr/libexec/git-core/mergetools/emerge
>> > > +usr/libexec/git-core/mergetools/examdiff
>> > >  usr/libexec/git-core/mergetools/gvimdiff
>> > >  usr/libexec/git-core/mergetools/gvimdiff2
>> > >  usr/libexec/git-core/mergetools/gvimdiff3
>> > > @@ -228,6 +228,7 @@ 
>> > > usr/share/git-core/templates/hooks/pre-applypatch.sample
>> > >  usr/share/git-core/templates/hooks/pre-commit.sample
>> > >  usr/share/git-core/templates/hooks/pre-push.sample
>> > >  usr/share/git-core/templates/hooks/pre-rebase.sample
>> > > +usr/share/git-core/templates/hooks/pre-receive.sample
>> > >  usr/share/git-core/templates/hooks/prepare-commit-msg.sample
>> > >  usr/share/git-core/templates/hooks/update.sample
>> > >  #usr/share/git-core/templates/info
>> > > @@ -270,6 +271,7 @@ usr/share/git-core/templates/info/exclude
>> > >  #usr/share/git-gui/lib/msgs/ja.msg
>> > >  #usr/share/git-gui/lib/msgs/nb.msg
>> > >  #usr/share/git-gui/lib/msgs/pt_br.msg
>> > > +#usr/share/git-gui/lib/msgs/pt_pt.msg
>> > >  #usr/share/git-gui/lib/msgs/ru.msg
>> > >  #usr/share/git-gui/lib/msgs/sv.msg
>> > >  #usr/share/git-gui/lib/msgs/vi.msg
>> > > @@ -302,6 +304,7 @@ usr/share/git-core/templates/info/exclude
>> > >  #usr/share/gitk/lib/msgs/it.msg
>> > >  #usr/share/gitk/lib/msgs/ja.msg
>> > >  #usr/share/gitk/lib/msgs/pt_br.msg
>> > > +#usr/share/gitk/lib/msgs/pt_pt.msg
>> > >  #usr/share/gitk/lib/msgs/ru.msg
>> > >  #usr/share/gitk/lib/msgs/sv.msg
>> > >  #usr/share/gitk/lib/msgs/vi.msg
>> > > diff --git a/lfs/git b/lfs/git
>> > > index 564bc09..9b55b20 100644
>> > > --- a/lfs/git
>> > > +++ b/lfs/git
>> > > @@ -1,7 +1,7 @@
>> > >  #########################################################################
>> > > ####
>> > > ##
>> > >  #                                                                        
>> > >     
>> > >  #
>> > >  # IPFire.org - A linux based
>> > > firewall                                         #
>> > > -# Copyright (C) 2013  IPFire 
>> > > Team  <info@ipfire.org>                         
>> > >  #
>> > > +# Copyright (C) 2017  IPFire 
>> > > Team  <info@ipfire.org>                         
>> > >  #
>> > >  #                                                                        
>> > >     
>> > >  #
>> > >  # This program is free software: you can redistribute it and/or
>> > > modify        #
>> > >  # it under the terms of the GNU General Public License as published
>> > > by        #
>> > > @@ -24,15 +24,15 @@
>> > >  
>> > >  include Config
>> > >  
>> > > -VER        = 2.7.4
>> > > +VER        = 2.12.1
>> > >  
>> > >  THISAPP    = git-$(VER)
>> > > -DL_FILE    = $(THISAPP).tar.xz
>> > > +DL_FILE    = $(THISAPP).tar.gz
>> > >  DL_FROM    = $(URL_IPFIRE)
>> > >  DIR_APP    = $(DIR_SRC)/$(THISAPP)
>> > >  TARGET     = $(DIR_INFO)/$(THISAPP)
>> > >  PROG       = git
>> > > -PAK_VER    = 13
>> > > +PAK_VER    = 14
>> > >  
>> > >  DEPS       = "perl-Authen-SASL perl-MIME-Base64 perl-Net-SMTP-SSL"
>> > >  
>> > > @@ -44,7 +44,7 @@ objects = $(DL_FILE)
>> > >  
>> > >  $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>> > >  
>> > > -$(DL_FILE)_MD5 = b0219fcb6d73104361f4fbdba3741d00
>> > > +$(DL_FILE)_MD5 = a05c614c80ecd41e50699f1562e1130c
>> > >  
>> > >  install : $(TARGET)
>> > >  
>> > > @@ -77,6 +77,7 @@ $(subst %,%_MD5,$(objects)) :
>> > >  $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>> > >  	@$(PREBUILD)
>> > >  	@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf
>> > > $(DIR_DL)/$(DL_FILE)
>> > > +	cd $(DIR_APP) && autoconf
>> > >  	cd $(DIR_APP) && ./configure \
>> > >  		--with-gitconfig=/etc/gitconfig \
>> > >  		--prefix=/usr \
>> 
>>